This customer who owned a lovely period residence in Leatherhead had pulled up an old hallway carpet to discover this gem of Victorian Tiled floor. The tiles were covered in carpet adhesive, paint splashes and what looked like a hundred years of dirt. I suspect the previous owners felt it was easier to cover the hallway in carpet rather than have it cleaned properly or perhaps it was just the trend at the time.
Given the obvious amount of work that would be needed to restore it we got a call to pop round and provide an estimate. We do a lot of Victorian floor restorations and across the Tile Doctor network I’m confident in saying there is a Tile Doctor working on a Victorian Tiled floor every day of the week.
The owner was happy with the quote and we agreed a date to return and restore the floor.
Cleaning a Heavily Soiled Victorian Tiled Floor
Working in a metre square area at a time, I first applied a solution of Tile Doctor Oxy-Gel and left it to dwell for twenty minutes. Oxy-Gel is a relatively new product that being in Gel form is easy to control and stays in place allowing it to dissolve dirt and in this case loosen the adhesive.
After leaving it to dwell for 20 minutes I attacked it with a very coarse 100 grit diamond pad attached to a buffer machine. This removed a minuscule layer from the surface of the tile and with it the muck. I vacuumed up the excess with a wet vacuum then rubbed down the stubborn areas with a 50 grit hand block. This removed a lot of dirt and drastically lightened the whites and blues. Finally I neutralised the floor with two rinses of clean, warm water again using the wet vacuum to remove as much moisture as possible from the floor.
I repeated this process along the length of the hallway and then inspected the floor retreating any areas containing stubborn marks.
Sealing a Victorian Tiled Floor
The hallway wasn’t that big an area so I had agreed to do the whole floor in one day. As a result I needed to force dry the floor so I could seal the tiles in the same day. I have a number of tools to do this including an industrial air mover and a heat gun which were applied for about an hour before it was dry.
To seal the tiles I applied two coats of Tile Doctor Colour Grow which as its name suggests is a colour enhancing sealer that works by impregnating the pores of the tile protecting it from within and enriching the colours in the process. This gave a lovely contrast in colour whilst providing a matt finish; another advantage of Colour Grow is it’s a fully breathable sealer which won’t trap moisture under the tile which is important for these old floors where no damp proof membrane is installed.
The Victorian tiled hallway floor now looks amazing.
Source: Victorian Tile Cleaning and Renovation Service in West Surrey