Deep Cleaning Old Victorian Tiles

The owner of this pre 1900s period house in the town of Melksham contacted us to clean & seal their Victorian tiled hallway which had been laid in a geometric pattern and was the original floor from when the house was built. Given its age it was in excellent conditions and a real testament to Victorian engineering.

Original Victorian Tiles Melksham Before Cleaning

Cleaning Victorian Tiles

Firstly we mixed a strong solution of Tile Doctor Pro-Clean and Nano-Tech HBU remover; HBU stands for Heavy Build-Up and is a great product for getting deep stains out of tiled floors. The tiles were covered with the solution and left for twenty minutes so it could soak into the pores. We then attached a black pad to a rotary machine and scrubbed the area thoroughly. Any paint or adhesives was then removed using a scraper and once we were satisfied we then removed the slurry using a wet vacuum and rinsed several times with cold clean water and a deck brush to ensure we had removed all traces of cleaning product before sealing. Stubborn areas were re-treated and the process took most of the day so we then left the floor to dry overnight.

Sealing Victorian Tiles

Upon our return we tested the floor was dry with a damp meter, testing in a number of locations. The readings were fine so we proceeded to seal the floor using six coats of Tile Doctor Seal and Go which will protect the floor from further dirt build-up and staining, it also adds a nice subtle sheen to the tiles.

Original Victorian Tiles Melksham After Cleaning and Sealing

All went well with no major problems and as you can see the tiles now look fantastic.
 
 
Source: Tile, Stone and Grout Problems Resolved in Wiltshire

Renovating a Victorian Tiled Hallway

Details below of a customer in Telford who bought a house with a Victorian Tiled Hallway a couple of years prior and has been refurbishing it in sections. When I went there to do the quotation the floor I could see it was in a desperate state and in need of a deep clean and replacement of several broken and cracked tiles, there were several loose ones too.

Victorian tiled Hallway before restoration in Telford Victorian tiled Hallway before restoration in Telford

Cleaning and Repairing a Victorian Tiled Floor

The floor was cleaned using a medium dilution of Tile Doctor Pro-Clean which was left to soak into the tiles for around 15 minutes before being worked into the tile and grout using a rotary machine fitted with a black scrubbing pad and a stiff grout brush. Pro-Clean is a strong alkaline cleaning product that is safe to use on Stone, Tile and Grout. The floor was given a thorough rinse with clean water and a wet vacuum was used to remove the water from the floor, stubborn areas were then spot cleaned using the same process and the floor was then left to dry off overnight.

Victorian tiled Hallway after repair and cleaning in Telford Victorian tiled Hallway after repair and cleaning in Telford

The next day I returned to do the repair work, originally there were seven tiles to replace, but I ended up replacing sixteen tiles and fixing twenty five, fortunately Victorian tiles are still popular and you can still source replacements.

Victorian tiled Hallway after repair and cleaning in Telford Victorian tiled Hallway after repair and cleaning in Telford

Sealing a Quarry Floor Sealing

To ensure the repaired areas had sufficient tile for the adhesive and grout to set I left the floor for four days before returning to apply a sealer checking the moisture level first to ensure it was dry enough to take the sealer. To seal the tiles which will help protect them from staining I applied five coats of Tile Doctor Seal and Go which works really well on Victorian tiles and adds a nice subtle shine to the floor also being water based you don’t get that smell that a solvent based sealer has.

Victorian tiled Hallway after restoration in Telford Victorian tiled Hallway after restoration in Telford

 
 
Source: Restoring Victorian tiles in Shropshire

Restoring an Original Geometric Tiled Floor

This original Victorian Geometric tiled floor was recently uncovered in the hallway of a house in Mapperley near Nottingham. These beautiful old floors built by Victorian Craftsmen are often neglected and sometimes hidden by other floor coverings. In this case we had to remove carpet, carpet grippers and underlay which had been stuck down and often we find vinyl tiles glued to the tile surface etc. This takes its toll on the floor causing it to lose its vitality however help is at and in the form of the specialist Tile Doctor Restorative Cleaning and Sealing Treatment.

Victorian Geometric Tiled Hallway Floor Mapperley Before Cleaning

Cleaning the Victorian Tiled Floor

The first job was to protect the adjacent carpets and wood flooring, before starting the cleaning process. Then I applied a strong solution of Tile Doctor Pro-Clean which is a heavy duty cleaning solution mixed with Remove and Go which is a coating remover. This helps to remove old and worn coatings along, with the many years of soiling which was hiding the vibrant colours of the Victorian tiles beneath.

This unique cleaning solution along with a combination of dwell time and mechanical agitation breaks down the many years of contamination on the tiles. During this stage of the cleaning process, we also sometimes have to remove paint and adhesive residues. The cleaning process is intensive to ensure maximum soil removal and is achieved as above by using a weighted rotary floor cleaning machine, along with Tile Doctors restoration floor pads.

The resulting slurry created by the cleaning process above is vacuumed away with a wet vacuum and the floor was then rinsed with a dilution of Tile Doctors Grout Clean-Up product which removes any inherent efflorescence contamination that is common on old floors without damp proof membranes.

The floor is then given a thorough rinse with clean water to neutralise the floor and removing any trace of cleaning solution from the previous treatments which could affect the sealer, again a wet vacuum was used to get the floor as dry as possible.

The cleaning was completed in a day and to ensure the floor would be dry for sealing the next day I installed a couple of air movers and left it to dry out overnight.

Sealing the Victorian Tiled Floor

The following day I sealed the tiles to saturation point with Tile Doctor Colour Grow which is a ‘Colour Enhancing’ Impregnating Sealer. It’s an advanced sealer that allows the floor to breath, and also protects from both water and oil based spills and if maintained correctly will act as a long lasting treatment that will last many years!

With regards to maintenance I recommend that customers use a damp mop with a neutral PH cleaning product such as Tile Doctor Neutral Cleaner. This is highly effective on soiling but most importantly it’s not acidic and so will not damage the integrity of the sealer. Many household cleaning products, and also high-street branded cleaning products, can quickly damage floor coatings; they can also leave residues on floors that contribute to rapid re-soiling.

Victorian Geometric Tiled Hallway Floor Mapperley After Cleaning

 
 
Source: Tile, Stone and Grout Problems resolved in Nottinghamshire

Removing Carpet Tiles from Victorian Tiles

I’ve seen a few Victorian Tiled floors in my time and I can tell you the condition of this particular floor was one of the worst I’ve seen in a while. The tiles had been covered up with carpet tiles which had been stuck down with a strong adhesive and there was still a fair amount of carpet tile backing that needed removing, grout was also missing in places and I could see a fair amount of work would need to be done to get this floor restored.

Victorian Tiled Floor Before Cleaning in Stoke-on-Trent Victorian Tiled Floor Before Cleaning in Stoke-on-Trent

Cleaning Victorian Floor Tiles

The first job was to clean what I could of the floor and remove the remaining carpet tile so working in sections I applied Tile Doctor Pro-Clean and scrubbed it into the tiles carefully scraping off the tile backing as I went. There were a lot of tiles to cover so as you can imagine this was quite a painstaking process and I was literally working on one time at a time to get the job done. Once complete the floor was given a thorough rinse to remove any cleaning products and soiled cleaning solution which was then removed using a wet vacuum.

Once the floor was clean it was evident that some tiles were loose and needed resetting and others would need grouting so I set about doing this making sure to use a matching grout.

Sealing Victorian floor Tiles

I left the floor to dry overnight and came back the next day to seal the tiles. Fortunately they had dried overnight so I applied four coats of Tile Doctor Seal & Go. This is an ideal sealer for Victorian tiles as it adds a classic shine to the floor and will provide good protection from stains going forward. I think you will agree the floor has been transformed and now loos amazing, certainly the customer was very happy.

Victorian Tiled Floor After Cleaning in Stoke-on-Trent Victorian Tiled Floor After Cleaning in Stoke-on-Trent

 
 
Source: Tile, Stone and Grout Restoration Service in Staffordshire

Deep Cleaning Victorian Tiles in Leicestershire

This Victorian Tiled Floor was in the hallway of a house in Melton Mowbray which is famous for its pork pies and historic buildings, although structurally sound it has been some time since it had been given a deep clean and re-seal and was now looking rather dull and lifeless.

Victorian Tiled Floor Melton Mowbray Before Cleaning

Cleaning a Victorian Tiled Hallway Floor

To remove the old sealer and give the floor a thorough clean I applied a dilution of Tile Doctor Remove and Go and left it for about twenty minutes to soak in to the tiles and get to work on breaking down the sealer. This was followed by scrubbing the solution into the tiles using a rotary machine fitted with a black scrubbing pad. I also took the opportunity to freshen the grout by scrubbing the Remove and Go along the grout lines with a stiff brush. The resultant soiled cleaning solution was then rinsed away with fresh water which was then removed using a wet vacuum.

Some areas needed further treatment so the whole process was repeated until I was happy with the condition of the floor, at which point I give it another rinse to ensure there would be no trace of cleaning product on the tiles that could react with the sealer. I then removed as much water from the floor as best as I could with the wet vacuum and then left it to dry off overnight.

Sealing Victorian Hallway Tiles

I came back the next day to check the tiles had dried; it had so I started the application of the sealer. For Victorian Tiles I usually recommend Tile Doctor Seal and Go for a shiny finish or Colour Grow for a more subtle effect. The customer chose Colour Grow which is an impregnating sealer that soaks into the pores in the tile preventing dirt from becoming ingrained there and also enhances the natural colours in the tile.

Victorian Tiled Floor Melton Mowbray After Cleaning

The tiles now look much improved, if not new.
 
 
Source: Tile, Stone and Grout Restoration Service in Leicestershire

Restoring 200 year old Victorian tiles

Details below of a Victorian Tiled floor I renovated in Penrith earlier this year. The floor had previously been hidden under laminate flooring and the mat well had been concreted over and other tiles were missing and replaced with concrete infill.

Victorian Tile Renovation Penrith Before

Restoring Victorian Floor Tiles

I carried out a damp test and started by removing the concrete infill and levelling the mat well with a self-levelling compound. Fortunately I had been able to source reproduction tiles that were a pretty good match to the originals which is amazing bearing in mind that the floor was originally laid in 1831 (pre Victorian in fact).

Before replacing the missing tiles I cleaned the existing floor with a diluted mixture of Tile Doctor Remove and Go and NanoTech UltraClean; Remove and Go is a coatings remover so as well as cleaning the floor it also removed the traces of adhesive that was used to stick down the line. I washed down the floor and found there were still some stubborn marks which I tackled with neat Remove and Go and a steam cleaner. Once I was happy with the floor I gave it another rinse and then set about fixing the replacement tiles.

Victorian Tile Renovation Penrith After

Sealing Victorian Floor Tiles

I needed the floor bone dry before sealing so I allowed it to dry out for a couple of days before returning. I sealed the tiles with Tile Doctor Seal and Go which adds a nice subtle shine however I did find the Victorian tiles to be extremely absorbent and so needed seven coats of sealant in total which took much of the day. The sealer did well to bring out the deep colours in the tile as well as brought out the colour in the tiles as well as providing the lovely satin finish. The customers were extremely satisfied with the final result

Victorian Tile Renovation Penrith After

 
 
Source: Tile, Stone and Grout Restoration Service in North-Cumbria

Putting the Shine Back On Old Victorian Tiles

I’m beginning to wonder if Tile Doctor has started a trend that has got people looking under their hallway carpets looking for period floors. Indeed this customer in Whitchurch has done exactly that and discovered a beautiful Victorian tiled floor which was with the exception of adhesive residue and dirt was in reasonable condition. They had tried to restore it themselves but could not achieve the desired results so being their local Tile Doctor we got the call.

Victorian tiled hallway Whitchurch before cleaning Victorian tiled hallway Whitchurch before cleaning

Removing Glue and Dirt from a Victorian Tiled Floor

The floor was dirty which I would normally take care of with Tile Doctor Pro-Clean however glue requires something stronger so a strong dilution of Tile Doctor Remove and Go was applied, left to soak in and then scrubbed into the tiles using a rotary machine fitted with a black scrubbing pad. Remove and Go does pretty much what its name suggests and is a great product for safely removing coatings from tile. The floor was given a thorough rinse with clean water and a wet vacuum was used to remove the water from the floor and get it dry so it could be sealed. Some stubborn areas were still evident so they were spot treated using more Remove and Go.

Victorian tiled hallway Whitchurch after

Sealing a Quarry Floor Sealing

The floor needs to be thoroughly dry before it can be sealed and this can be a problem with old houses which may have damp issues. I therefore left the floor to dry for 5 days before coming back to seal it and when I returned checked the floor using a damp meter first. The readings were fine however there were a couple of areas that needed further treatment so those were spot treated and then dried until I was satisfied the floor was as good as it could be. I then processed to seal the floor using five coats of Tile Doctor Seal and Go which adds a nice subtle sheen to the tiles as well as providing stain protection going forward.

I think you will agree from the photographs the floor looks great, certainly the customer was really pleased with the result.

Victorian tiled hallway Whitchurch after sealing

 
 
Source: Tile, Stone and Grout Restoration Service in Shropshire

Deep Cleaning and Removing Old Sealers From Edwardian Floor Tiles

This Edwardian tiled stone floor was installed in the hallway of a house in Richmond, Surrey. It had not been deep cleaned for a number of years and a number of layers of old sealer were visible causing a yellowing of the tile. The old sealant needed to be stripped off before cleaning could take place and leave the Edwardian floor in a state ready to receive a new seal.

Edwardian tiled floor Richmond before cleaning

Cleaning Edwardian Tiles

To remove the old sealer a dilution of Tile Doctor Remove and Go which is a solvent based stripper was applied to the floor, left to dwell for a while and then steamed into the tile which helps to break up the old sealers. The tiles were then scrubbed using a rotary machine and a dilution of Tile Doctor Pro-Clean which is a strong alkaline product and the residue pressure rinsed away. The soiled residue was then removed using a wet vacuum and the floor rinsed thoroughly.

Sealing Edwardian Tiles

After leaving the Edwardian floor for 24 hours to dry, we then applied seven coats of Tile Doctor Seal and Go topical sealer. This not only gives the floor a high level of protection but it also enhances the contrast of the tiles and gives a nice shine,

Edwardian tiled floor Richmond after cleaning

Hopefully you can appreciate the difference from the photographs and how the appearance of the tiles now looks much fresher.
 
 
Source: Tile and Stone Maintenance Service in Middlesex

Removing Adhesive and Paint from Vistorian Hallway Tiles

The owner of this house located in the village of Holt had discovered a beautiful Victorian Tiled floor hidden underneath their hallway carpet and made contact with us to get it restored and brought back to life.

Victorian Tiled Floor Restoration in Holt Before

Cleaning a Victorian Tiled Floor

We started by making a strong dilution of Tile Doctor Pro-Clean mixed 50/50 with Nanotech Ultraclean which was applied to the floor and left to soak in to eat through the dirt, dust and marks left behind from the carpet and underlay. Once we let the solution dwell for twenty minutes we attached a black scrubbing pad to a rotary machine and worked the cleaning solution into the tile to remove the dirt and any old sealer that may have been present, then once the cleaning solution became was very dirty it was removed using a wet vacuum.

The cleaning process revealed that there were paint splatters all around the wall edges where decorating had previous taken place and there was also evidence of carpet adhesive remaining on the tile. To remove this a solution of Tile Doctor Remove & Go was applied to the stubborn areas and left to dwell for ten minutes before being agitated with a stiff deck brush and a floor scraper. Once the edges were to a satisfactory level we then rinsed the area several times with fresh water to ensure any trace of cleaning product had been removed before sealing again using a wet vacuum to remove the water and also to dry the floor as much as possible before leaving for the evening.

Sealing a Victorian Floor Sealing

Upon our return the next day we did a damp test to make sure the floor was ready to be sealed. The test was positive so we then sealed the Victorian tiles with five coats of Seal & Go which both protects the floor against spills and traffic but also enhances the colours of each tile.

Victorian Tiled Floor Restoration in Holt After

 
 
Source: Residential and Commercial Victorian Tile Restoration in Wiltshire

Matching old and new Victorian tiles

This particular Victorian tiled floor had been installed in the hallway of a house in Stow Park, Gwent around 130 years ago. Despite its age it was in a good condition and the detailed pattern although dirty was still very distinctive, the customer felt however that the floor was spoilt by the total erosion of the stone step at the front door which had suffered from the 130 years of footfall that had occurred across the threshold.

Victorian Tile Issue Resolved in Gwent Before

They asked me for any suggestions to make it more pleasing on the eye so I chose various colours from the main floor area and created a new entrance step leading to the main hallway comprising of 150 mm x 150 mm original style red and black floor tiles and 150 mm x 75 mm original style black round edge tiles.

Victorian Tile Issue Resolved in Gwent After

Cleaning a Victorian Tiled Floor

The difference between the old and new was fairly obvious so once the tiles had been laid and the grout had gone off I returned to give the original Victorian tiles a thorough clean. There were some stubborn stains on the floor so I decided to scrub in a couple of strong products called Tile Doctor Remove and Go followed by Tile doctor Grout Clean-up rinsing in between the stages.

Remove and Go is a sealer and coatings remover that as well as cleaning will remove old coatings such as sealers from the tile, this is important if you wish to re-seal the floor as you can get unexpected results if you add one sealer on top of another. Grout Clean-up removes mineral deposits such as the white salts from effloresce, rust and grout smears. The floor was given a thorough rinse following the cleaning process to ensure no product was left on the floor that could upset a sealer.

Sealing a Victorian Floor Sealing

Aided by the warm weather it wasn’t long before the tiles were dry enough to be sealed and so I applied two coats of Tile Doctor Seal and Go which adds a nice subtle sheen to the floor as well as providing on-going stain protection.

Victorian Tile Issue Resolved in Gwent After Sealing

I think you would have to agree my solution worked out well and the new tiles look part of the original floor.
 
 
Source: Residential and Commercial Stone and Tile Restoration in Gwent

Victorian Tile Restoration in Wiltshire

This customer had just brought a house in Chippenham which they were renovating and it had come to their attention that Victorian tiles had been laid under the hallway carpet. Keen to restore them the customer called us in to see if we could enhance the appearance of their floor.

Cleaning Victorian Tiles

We started by covering the floor with a mild solution of Tile Doctor Pro-Clean mixed 50/50 with NanoTech Ultra Clean, this combination creates a powerful cleaning solution for tackling ingrained dirt and staining. The solution was left to dwell on the tile for twenty minutes and then scrubbed into the tile using a black pad attached to a rotary machine. This process was quite effective and the cleaning solution turned colour with the dirt as it came off the tile. Once we were happy we had removed all the dirt the now dirty cleaning solution was removed using a wet vacuum and the floor rinsed several times with cold water to remove any trace of cleaning product.

Victorian Tiled Floor Chippenham During Cleaning

With the floor now clean it became evident that there were paint spots along the edges which we removed by applying Tile Doctor Remove & Go this time leaving it to dwell for five to ten minutes before agitating with a stiff deck brush. Once again we used a wet vacuum to remove any product and rinsed the floor using cold water.

Sealing Victorian Tiles

We left the floor to dry overnight and returned the next day to seal the tiles. Upon our return we first used a damp meter to confirm that the floor was dry enough to seal which it was. We then sealed the floor with five coats of Tile Doctor Seal & Go which will protect the floor from staining and make it easy to clean, Seal and Go also adds a nice shine to the tile enhancing the colours and general appearance of the tiles.

Victorian Tiled Floor Chippenham After Cleaning and Sealing Victorian Tiled Floor Chippenham After Cleaning and Sealing

We definitely achieved the customer’s goal to enhance the look of the floor and before leaving we gave them some cleaning tips to prolong the life of the sealer by recommending the use of a Tile Doctor Neutral Tile Cleaner which won’t eat into the sealer like the mildly acidic tile cleaning products that you buy in the supermarket.
 
 
Source: Residential and Commercial Tile Cleaning in Chippenham

Removing Glue From Victorian Floor Tiles

This Victorian Tiled Hallway at a house in Radford near Coventry had been well preserved under a carpet for many years and the owners of the house now wanted it brought back to life. Physically the tiles were in good condition however they did suffer from the usual issues of paint splashes and adhesive stuck to the surface.

Victorian Tiled Floor Refresh Radford Before Victorian Tiled Floor Refresh Radford Before

Cleaning Victorian Tiles

To clean up the tiles and remove the paint and glue I used a dilution of Tile Doctor Remove and Go. The edges of the floor was done first as this was where the most pain splashes were to be found due to the skirting being painted at some point in the past. The usual procedure still applied allowing the product to soak in and soften the paint before being scrubbed off by hand. Once the edges were done I moved onto the main part of the floor using the same process however this time I had the advantage of being able to use a rotary machine fitted with a scrubbing pad. The dirty solution was rinsed away with water and removed with a wet vacuum.

To finish off and remove some signs of efflorescence (white salt stains) the tiles were then scrubbed in a dilution of Tile Doctor Grout Clean-Up. This did the trick but you can’t leave this product on the tiles for too long as its an acid so as soon as it had done its job it was washed off and then the tiles were then given a thorough wash down with clean water.

My work was done for the day so I left a fan running to help speed dry the floor overnight and left for the day.

Sealing Victorian floor tiles

I came back the next day to seal the floor using Tile Doctor Seal and Go sealer which provides stain protection as well giving a nice sheen to the tile, the tiles were quite porous and needed six coats before they were fully sealed.

Victorian Tiled Floor Refresh Radford After

 
 
Source: Residential and Commercial Tiled Floor Cleaning in Warwickshire

Victorian Tiled Hallway restored near Coventry

Popular as they are in the UK it wasn’t long before I was called back to refurbish another Victorian Tiled Hallway Floor this time in the town of Allesley near Coventry. This tiles were heavily soiled and had been splashed with paint from decorating, on top of this there was evidence of adhesive from when the floor had been previously covered in carpet and there were a number of damaged tiles that needed replacing.

Victorian Tiled Hallway Coventry Before Cleaning Victorian Tiled Hallway Coventry Before Cleaning

Cleaning Victorian Tiles

To get the tiles clean of paint and dirt I decided to go straight for a dilution of Tile Doctor Remove and Go which was left to soak into the tiles for around thirty minutes before scrubbing it in with a rotary machine fitted with a scrubbing pad. The dirty solution was rinsed away with water and removed with a wet vacuum and stubborn areas and grout re-treated with a scrubbing brush by hand.

I wasn’t entirely happy with the condition of the tiles at this stage so the next step was to scrub in a dilution of Tile Doctor Grout Clean-Up which is an acid based product that removed grout haze, mineral deposits, rust stains and efflorescence. This did the trick but being an acid based product you can’t leave it on the tiles for too long and so was washed off soon after and the tiles washed down with clean water.

I scraped out the grout surrounding the damaged tiles and lifted them out, I had already arranged replacements so once that was done and tidied up it was just a question of putting the replacement in place with tile adhesive and re-grouting using a sympathetic grout colour to match the aged existing grout.

My work was done for the day so I left a couple of fans running to help dry the floor and left for the day.

Victorian Tiled Hallway Coventry Drying

Sealing Victorian floor tiles

I came back the next day to seal the floor using Tile Doctor High Shine sealer which provides stain protection as well as a very shiny finish; five coats were needed to get it fully sealed.

Victorian Tiled Hallway Coventry After Cleaning and Sealing Victorian Tiled Hallway Coventry After Cleaning and Sealing

 
 
Source: Residential and Commercial Stone Floor Restoration in Warwickshire

Restoring Victorian Tiles in Yorkshire

This one hundred year old floor needed some serious cleaning; these Orange and Black Victorian tiles installed in the hallway of a period house in Skipton, North Yorkshire had paint, glue and around twenty years of ingrained dirt on them due to previously being covered in carpet.

Victorian Tiles Skipton Before Cleaning Victorian Tiles Skipton Before Cleaning

Restoring Victorian Floor Tiles

To restore the tile surface we used a process we call the Blanket method which involves covering the floor in a mixture of Tile Doctor Remove & Go and Nano Tech Ultra Clean. The whole floor was covered very liberally with the chemical mixture and then sheeted over with polythene and sealed all the way round with water proof tape. There must be a perfect seal so no chemicals can dry out by oxidation and is left over night to soak into the tile.

The next day the polythene was removed in sections and the chemicals were first cleaned off with rags and then rinsed of many times with warm water. The whole floor was then scrubbed with a rotary machine fitted with a black pad and Tile Doctor Pro-Clean mixed 1 to 4 parts warm water to remove all the residue of the chemicals and any dirt. Pro-Clean is an industrial strength cleaning product that is safe to use on Tile, Stone and Grout.

Sealing the Victorian Tiled Floor

The next day I returned and checked the floor for dampness using a Damp Meter which indicated the floor was dry and ready for sealing. Three coats of sealant was used and for Victorian Floor tiles I recommend Tile Doctor Seal and Go which provides a low sheen finish whilst offering great stain protection.

Victorian Tiles Skipton After Cleaning Victorian Tiles Skipton After Cleaning

The 100 year old floor now looks almost as new and I think you will agree it has been transformed.
 
 
Source: Stone and Tile floor cleaning services in North Yorkshire

Removing Stubborn stains from neglected Victorian Tile

The photograph below is from a Victorian tiled hallway floor that we were asked to restore in the historic town of Towcester, Northamptonshire; the owner wanted the tiles restored as an original feature. You can see from the photograph below how dull and neglected the tiles were so we had our work cut out.

Victorian Tiles in Towcester Before Restoration

Cleaning Victorian Tiles

We set about cleaning the tile using Tile Doctor Pro-Clean which is a powerful alkaline cleaning product that is safe to use on tile and stone. It was applied with a mop and left it to dwell on the floor for ten minutes first in order to give it chance to soak into the tile and get to work on the dirt. It was then worked into the floor using a rotary machine fitted with a black scrubbing pad, stiff hand brushes were used in difficult to get to places and along the grout lines requiring a substantial amount of elbow grease. The soiled water was picked up with a wet and dry vacuum and the floor was rinsed with clean water so we could see the result.

Unfortunately there were a number of stubborn areas and a stronger product was needed to shift them so we applied a dilution of Tile Doctor Remove and Go which is a coating remover that can shift most issues, again this was applied and left to dwell for a while before working it into the stubborn stains using hand brushes. The dirty solution was removed again using the wet and dry vacuum and we could see the tiles were now clean so the floor was given a thorough rinse several times with fresh water to remove any leftover chemical and then left to dry overnight.

Sealing Victorian Tiles

The next day the floor had dried so we were able to seal it using four coats of Tile Doctor Seal and Go which adds a nice shine to the floor as well as providing a surface seal that will help protect the tile from stains going forward.

Victorian Tiles in Towcester After Restoration

A lot of effort but what a transformation and well worth the work that went into it as you can see from the photograph above.
 
 
Source: Victorian Tile Restoration in Brighton