Restoring Victorian Tiles Discovered under Laminate in Stafford

The photographs below are of a Victorian Tiled Hallway I recently restored in Stafford. This lovely floor was discovered underneath laminate flooring I can only assume because a previous owner of the house couldn’t work out how to restore it as it was in a terrible state and decided to cover it up.

Fortunately thanks to the power of the internet the current owner discovered Tile Doctor on-line and called us in to have a look with the aim of restoring the floor as a period feature.

Victorian Tiled Hallway Before Restoration Stafford

Restoring a Victorian Tiled Hallway

Laminate is laid as a floating floor so unlike vinyl or carpet coverings that I usually deal with the laminate had if anything protected what was essential a very dirty Victorian tiled floor that was stained with adhesive and paint splashes.

With the laminate flooring already removed by the owner my preparation consisted of adding protection to the wooden paintwork. Once done I started to tackle the dirt by applying a strong dilution of Tile Doctor Pro-Clean and leaving it to soak into the tile and grout for about fifteen minutes. Then with a rotary machine fitted with a black scrubbing pad and running at slow speed I set about scrubbing the floor to get as much ingrained dirt out of pores of the Victorian floor tiles as possible. Once that was done I rinsed off the now soiled cleaning solution with water and then extracted it with a wet vacuum.

This action made a huge difference to the tile and grout, but the paint and adhesive stains were more difficult to remove so these areas were treated with Tile Doctor Remove and Go assisted with a steamer to help draw the staining out.

With the tile ad grout now clean of dirt and stains I gave the floor a rinse with water to remove any trace of cleaning products and then extracted as much moisture from as possible using the wet vacuum. I then left for the day allowing the floor to dry off fully overnight.

Sealing Victorian floor Tiles

The next day I confirmed the floor had dried off and then proceeded to apply five coats of Tile Doctor Seal & Go Extra which is a fully breathable sealer that adds a lovely shine to the tiles. I used a fully breathable sealer as these old houses were built before the invention of the damp proof course and I wanted to ensure that any moisture could rise through the floor and evaporate unhindered.

Victorian Tiled Hallway After Restoration Stafford

The final photograph shows the huge transformation I achieved with the floor and as you can imagine my customer was very happy with the result.
 
 
Source: Victorian Tile Cleaning and Restoration Service in Stafford, Staffordshire

Victorian Tiled Hallway Renovated in Oxford

The Victorian tiled hallway shown below had until recently been covered by carpet and was in surprisingly good condition for its age which is a testament to the durability of these floors. My client who lives in Oxford had managed to remove most of the glue that had been used to secure the carpet to the tile but found it had left an imprint on the floor. Unable to take the restoration any further we were asked to remove the ground in grime and seal the floor.

Carpet Covered Victorian Tiled Floor Before Cleaning Oxford

Restoring Victorian Quarry Tiles

My first task was to remove what was left of the carpet adhesive primarily with the aid of scraper which was used carefully along the edges. This removed the thicker parts of the glue but needed more work to remove all the traces; so a 50 grit disc fitted to a handheld machine was run around the edges of the whole floor to complete the job removing the residue and dirt in the process.

I then used a 50 grit milling pad attached to a rotary floor machine to remove the ground in grime and clean the whole floor. The floor was then rinsed with water to remove the soil that was generated afterwards and then the process repeated this with a 100 grit and 200 grit milling pad to fully restore the appearance of the tile.

This process took up most of the day so before leaving I gave the floor an acid wash using a mild dilution of Tile Doctor Grout Clean-up and then followed this with a good rinse and final clean with Tile Doctor Neutral Cleaner.

Sealing Victorian Tiles

Having finished cleaning the floor I left it to dry off completely for three days to ensure it was bone dry before returning to seal it.

To seal I applied Tile Doctor Colour Grow which is an impregnating sealer that protects the tile from within by occupying the pores in the clay, it also enhances the natural colours in the tile in the process and leaves a matt finish.

Carpet Covered Victorian Tiled Floor After Cleaning Oxford

The finished floor looks a lot brighter now it’s now free of all the dirt and glue marks, the new sealer will also ensure it’s easy to clean and keeps its appearance for some time to come.
 
 
Source: Victorian Tile Cleaning and Sealing Service in Oxfordshire