I’ve seen a few Victorian Tiled floors in my time and I can tell you the condition of this particular floor was one of the worst I’ve seen in a while. The tiles had been covered up with carpet tiles which had been stuck down with a strong adhesive and there was still a fair amount of carpet tile backing that needed removing, grout was also missing in places and I could see a fair amount of work would need to be done to get this floor restored.
Cleaning Victorian Floor Tiles
The first job was to clean what I could of the floor and remove the remaining carpet tile so working in sections I applied Tile Doctor Pro-Clean and scrubbed it into the tiles carefully scraping off the tile backing as I went. There were a lot of tiles to cover so as you can imagine this was quite a painstaking process and I was literally working on one time at a time to get the job done. Once complete the floor was given a thorough rinse to remove any cleaning products and soiled cleaning solution which was then removed using a wet vacuum.
Once the floor was clean it was evident that some tiles were loose and needed resetting and others would need grouting so I set about doing this making sure to use a matching grout.
Sealing Victorian floor Tiles
I left the floor to dry overnight and came back the next day to seal the tiles. Fortunately they had dried overnight so I applied four coats of Tile Doctor Seal & Go. This is an ideal sealer for Victorian tiles as it adds a classic shine to the floor and will provide good protection from stains going forward. I think you will agree the floor has been transformed and now loos amazing, certainly the customer was very happy.
This customer had just brought a house in Chippenham which they were renovating and it had come to their attention that Victorian tiles had been laid under the hallway carpet. Keen to restore them the customer called us in to see if we could enhance the appearance of their floor.
Cleaning Victorian Tiles
We started by covering the floor with a mild solution of Tile Doctor Pro-Clean mixed 50/50 with NanoTech Ultra Clean, this combination creates a powerful cleaning solution for tackling ingrained dirt and staining. The solution was left to dwell on the tile for twenty minutes and then scrubbed into the tile using a black pad attached to a rotary machine. This process was quite effective and the cleaning solution turned colour with the dirt as it came off the tile. Once we were happy we had removed all the dirt the now dirty cleaning solution was removed using a wet vacuum and the floor rinsed several times with cold water to remove any trace of cleaning product.
With the floor now clean it became evident that there were paint spots along the edges which we removed by applying Tile Doctor Remove & Go this time leaving it to dwell for five to ten minutes before agitating with a stiff deck brush. Once again we used a wet vacuum to remove any product and rinsed the floor using cold water.
Sealing Victorian Tiles
We left the floor to dry overnight and returned the next day to seal the tiles. Upon our return we first used a damp meter to confirm that the floor was dry enough to seal which it was. We then sealed the floor with five coats of Tile Doctor Seal & Go which will protect the floor from staining and make it easy to clean, Seal and Go also adds a nice shine to the tile enhancing the colours and general appearance of the tiles.
We definitely achieved the customer’s goal to enhance the look of the floor and before leaving we gave them some cleaning tips to prolong the life of the sealer by recommending the use of a Tile Doctor Neutral Tile Cleaner which won’t eat into the sealer like the mildly acidic tile cleaning products that you buy in the supermarket.
The pictures below were taken in the entrance hall of a residence in the market town of Thame in Oxfordshire where the Victorian Floor Tiles although in good condition had become dull, you will see there is also a photograph of part of the tiles where holes had been drilled in the floor (don’t ask). Naturally the owner wanted both problems resolving and so called in their local Tile Doctor.
Restoring Victorian Quarry Tiles
The first task was to clean the floor which I used a dilution of Tile Doctor Pro-Clean which was left to dwell on the tile for around thirty minutes before being scrubbed in. This was a small area so I used a small black scrubbing pad attached to a cordless drill to do this; a stiff scrubbing brush was also run along the grout lines to make sure any staining to the grout was also dealt with. The resulting soiled solution was then removed using a wet vacuum and the tiles rinsed with water.
The next step was to remove some stubborn paint marks for which Tile Doctor Grout Clean-Up was applied and scrubbed in with a stiff scrubbing brush, you have to be very careful with this product as it is an acid so you can’t leave it on the tile for too long however it does resolve all sorts of tile staining problems. Again this was removed with a wet vacuum and the floor rinsed thoroughly with fresh water to remove any trace of the product.
Sealing Victorian Quarry Tiles
When the floor dried I filled the holes in the Victorian Tile with a quick drying flexible grout which was left to dry and then painted using an acrylic paint to colour the grout the same as the different colours in the tile. On close inspection the hole damage is still visible however they are now a lot less obvious.
The next step was to seal the floor using five thin coats of Tile Doctor Seal & Go which adds a nice sheen to the floor as we as providing protection and making it easier to clean going forward.