Victorian Tiled Office Hallway Restored in Birmingham

A property company contacted me regarding a large Victorian tiled hallway at their head office which dated from the late 1800’s. The floor had been neglected for some years and recent restoration to the building had taken its toll making the once glorious floor look very tired.

Victorian Tiled Hallway Tipton Before Restoration Victorian Tiled Hallway Tipton Before Restoration

I visited the property in Tipton located about halfway between Birmingham and Wolverhampton. I surveyed the floor and could see that the intricate patterns although dull and uninspiring at present would be truly stunning once restored and would create a real focal point for the building. I discussed with them what could be done to renovate the floor and the process needed.

Victorian Tiled Hallway Tipton Before Restoration

We agreed a price and a timescale, and the job was booked in. The only complication being the employees who I would need to work around so they were not unduly inconvenienced.

Victorian Tiled Hallway Tipton Before Restoration Victorian Tiled Hallway Tipton Before Restoration

Cleaning/Repairing a Victorian Tiled Hallway Floor

When I returned I started by focusing on deep cleaning the tiles. To do this the floor was given a coating of a strong solution of Tile Doctor Pro-Clean which was left to dwell for ten minutes. To work the solution into the tiles I used a 200-grit diamond pad which was attached to a weighted rotary machine, this really got into the ingrained dirt in the pores of the tiles.

Victorian Tiled Hallway Tipton During Restoration

The floor was then thoroughly rinsed off with water and the soil extracted with a powerful Airflex wet vacuum. After this I inspected the floor and could see the tiles still needed more work, so the whole process was repeated the process until I was satisfied.

Victorian Tiled Hallway Tipton During Restoration

Given the age of the floor I highly doubted it was unlikely to be protected by a damp proof membrane, so I was concerned about efflorescence salts appearing as the floor dried. To counter this and to further clean the tiles I then applied Tile Doctor Grout Clean Up and again went over with the diamond pad. Being an acid-based product, it will neutralize any alkaline salts present in the floor and in the alkaline cleaning solution used earlier. The floor was rinsed off thoroughly afterwards and died as much as possible with the Airflex.

I then reset some loose tiles, one in particular was right by the front door and had been irritating the staff for years catching the door! They would definitely be pleased to see that problem resolved. Luckily there were no damaged tiles that needed replacing so it was just a repair needed. Some areas were also re-grouted with a matching grout. This immediately improved the look of the floor.

Victorian Tiled Hallway Tipton During Tile Repair Victorian Tiled Hallway Tipton During Tile Repair

Sealing a Victorian Tiled Hallway Floor

The floor was left to dry for a day, then I returned to apply a sealer which would protect it from dirt becoming ingrained. After checking the moisture levels were acceptable with a moisture meter, I sealed the floor firstly with a coat of Tile Doctor Colour Grow which is an impregnating sealer that enhances the natural colour in the tile. Once this was dry it was followed with multiple coats of Tile Doctor Seal & Go, this works really well on Victorian tiles and gives the floor a lovely low sheen finish. Once finished the floor was restored back to its former and has given the building back is wow factor.

Victorian Tiled Hallway Tipton During Sealing

I left my client some Tile Doctor Neutral Tile Cleaner to maintain the floor with going forward. This is especially formulated for the regular cleaning of sealed tile and stone and will help maintain its’ delightful finish. The customer was very happy with the results and even called me next day to say that their customers were already making impressive comments about it when entering the building.

Victorian Tiled Hallway Tipton After Restoration Victorian Tiled Hallway Tipton After Restoration

 

Source: Victorian Tile Cleaning and Restoration Service in Tipton, Birmingham

Renovating a Victorian Tiled Hallway Without Water in Cleckheaton, West Yorkshire

I was asked to visit an old house from the Victorian era in Cleckheaton which is part of the West Yorkshire district of Kirklees and only 14 miles from my base in Oxenhope. The owners had bought the house last year and had been renovating it ever since. The last job was to sort out the Victorian tiled hallway that they knew from the previous owners had been covered by carpet for over 50 years.

Leaving the floor restoration until last was a sensible decision as the last thing you need is for a decorator to drip paint over your recently renovated floor. I could see the floor was in good physical condition but had layers of dirt, old sealant and of course paint splashes on it but after doing a test clean I knew that we could bring it back to life and return it to something like its former glory.

Victorian Tiled Hallway Before Renovation Cleckheaton Kirklees

The test clean is an important part of our survey as it gives the customer confidence we know what we’re talking about and it gives me a chance to work out the best way of cleaning the floor, so I can provide a more accurate quotation (see below). The owner of the property was impressed with the results of the test clean and keen to have the full potential of the Victorian tiled floor revealed booked me in to do a full clean and seal.

Deep Cleaning a Very Dirty Victorian Tiled Hallway Floor

Normally, we would clean these floors using our rotary machines and chemicals to break down the layers of dirt but in this instance that was not going to be effective. I worked this out during the test clean where I discovered that the tiles were very porous so that any liquid that was put on the floor was immediately absorbed into it. This meant that any chemicals that I applied to the floor did not have time to work before they were absorbed into the floor. When these floors were originally laid there was no damp-proof membrane laid underneath which leaves them very susceptible to damp issues and salting from efflorescence.

After trying a couple of different methods, I decided that the only way to get this floor clean was to use handheld diamond blocks and a small amount of water to clean the floor in very small sections at a time and then immediately remove the residue before it dried back into the floor. This was obviously very time consuming but did remove the dirt very effectively, it also meant that I wouldn’t exacerbate any efflorescence issues which could happen when excessive amounts of water are used.

Victorian Tiled Hallway During Renovation Cleckheaton Kirklees

Once the whole floor was clean it was given an Acid Wash with Tile Doctor Acid Gel to neutralise any potential salting issues. The gel was then rinsed off with water and extracted using a wet vacuum to remove as much moisture as possible from the floor. The now clean floor was then left to dry off thoroughly, so it would be ready for sealing.

Sealing an Old Victorian Tiled Hallway Floor in

A couple of days later I returned and started by checking the moisture levels in a couple of areas to verify that the tiles were dry enough to be sealed. All was well and so I proceeded to seal the floor with a couple of coats of Tile Doctor Colour Grow which is an impregnating sealer that seeps into the pores of the tile protecting it from within. Colour Grow is also a colour enhancing sealer that improves the natural colours in the tile and most importantly it’s a breathable sealer that will allows any moisture rising through the tile to evaporate. Using a breathable sealer is highly recommended for floors with no damp-proof membrane as moisture can become trapped under the tile which over time can cause damp to rise through the walls and even tiles to become loose.

Victorian Tiled Hallway After Renovation Cleckheaton Kirklees

The Customers were very impressed by the transformation in their floor and hopefully you can see from the photos how much of a difference that has been made to the floor.

 

Source: Victorian Tile Cleaning and Sealing Service in Cleckheaton, West Yorkshire

Stripping Wax off Scratched Victorian Tiles in Rushden

This customer called me as she was concerned about the scratches on her hallway tiles, they were not only unsightly but were also starting to trap dirt. The Victorian property in Rushden which lies between Bedford and Kettering on the east side of Northamptonshire.

We always offer a site visit to take a look at the job before doing any work, that way we can discuss what the cleaning options are, and it also demonstrates to the customer that we know what we’re talking about.

The hallway floor was a lovely and intricate example of Victorian tile installation and I could see that overall it was in good condition for its age. On closer inspection the customer was relieved to find out that it was the old wax sealant breaking down and not actually scratches on the tiles. I carried out a test on a small area to ascertain how difficult it would be to remove this wax. I realised I would be able to use Tile Doctors new product for the removal of the wax sealant, Tile Doctor Wax Away which is a fast and effective formula that is designed just for this type of job, it offers safe removal of wax and polish from tile and natural stone. We agreed the quote and the work was booked in for the following month.

Victorian Tiled Hallway Floor Before Wax Removal Rushden

Cleaning/Repairing a Victorian Tiled Hallway Floor

On our return we started to remove the wax coating using the Tile Doctor Wax Away product. It was applied neat and left to dwell for ten to fifteen minutes before working it into the floor with a small amount of water and a black stripping pad attached to a rotary machine. The resulting slurry was then removed using a wet vacuum. The floor was then inspected, and I decided to repeat this process with a hand brush in a couple of small areas and around the edges to ensure the old wax sealant was fully removed in these stubborn areas. The floor was then rinsed with water to remove any remaining slurry and trace of cleaning product and the wet vacuum was used to dry the floor again.

Victorian Tiled Hallway Floor During Wax Removal Rushden

My next course of action was to run over the floor with a 400-grit burnishing pad to remove imbedded dirt and stains from the tiles, this was followed by a second rinse with water. After removing the water with wet vacuum, the floor was then left to dry out fully for a few days aided by a large fan that I left on site. It’s important that the tiles are fully dry before applying a sealer and this is even more important on older floors where no damp proof membrane has been installed.

Sealing a Victorian Tiled Hallway Floor

I returned three days later and started by giving the floor a light vacuum and clean. I also took damp meter readings to check the floor was fully dry. Once I was satisfied I started to apply 2 coats of Tile Doctor Colour Grow Sealant, this is a breathable sealant which will allow the tiles to breath and allow moisture vapour from the sub floor to rise through the tiles which is important in these old houses where no damp proof membrane exists. Colour Grow is an impregnating sealer that works by occupying the pores in the tile thus preventing dirt from becoming ingrained there, the sealant enhances the natural colours in the tile and dries to a lovely natural matt finish.

Victorian Tiled Hallway Floor After Cleaning Rushden

Once finished the floor looked great and the customer was hugely relieved that the tiles could be restored easily and cost effectively, she had thought the damage may have been irreversible. Moving forward it will now be easier for her to maintain and keep clean. The floor is now back to its’ true self and properly in keeping with the rest of the period features in the house.

Victorian Tiled Hallway Floor After Cleaning Rushden

 

Source: Victorian Tile Cleaning and Restoration Service in Rushden, Northamptonshire

Repair and Restoration of a Geometric Victorian Tiled Hallway in Palmers Green, North London

It is not uncommon for the owners of houses built in this era to discover original Victorian tiled floors and hallways. Sometimes they have been covered up with carpet or linoleum to match the trend of the day and sometimes they get covered up because they have been neglected and though beyond economical repair. Trends have now been reversed and its becoming increasingly popular to restore them and bringing them back to their former glory and who can blame them, period features are in demand and they add value to a property.

This was the case with this floor at a house in Palmers Green, North London, affectionately known by the locals as ‘Little Cyprus or Palmers Greek’. The house is situated in a street with similar properties of the same age, so it’s likely there are a few hidden Victorian tiled floors on this street!

Victorian Tiled Hallway Before Cleaning Palmers Green

The client asked me to visit and survey what could be done to restore the floor. As you can see from the photographs the floor in the hall is a lovely example of geometric black and white tiles. However, it is in quite a state with, cracked and missing tiles and many years of built up dirt. I discussed with the client the options and we agreed a price to carry the work out, over a couple of days.

Victorian Tiled Hallway Before Cleaning Palmers Green

Cleaning and Repairing a Victorian Tiled Hallway Floor

Our first task was to protect the woodwork with protective tape including the doorway threshold edges, skirting and doors. Next, we began the cleaning the tile and grout including stripping off old coatings including sealers and waxes. To do this we applied a strong solution of Tile Doctor Pro Clean mixed 50:50 with Tile Doctor Remove & Go; when you have a combination of unknown contaminates, stubborn stains and dirt, a combination of products can be the best option. The solution was left on the floor around fifteen minutes before being worked into the floor, I find a longer dwell time makes the removal of sealers, adhesives, paints and grime easier. We then agitated the wet area using a black scrubbing pad fitted to a rotary floor buffer and used detail brushes for the more the intricate areas.

This process turned the cleaning solution in a black slurry which was extracted off the floor using a wet vacuum and the floor then steam cleaned to remove any remaining product residue and believe me there really was a lot of dirt to remove. A thorough rinse followed, and the floor was left for a short while to dry.

Next up we tackled the repairs, starting with the removal loose, cracked and broken tiles. Luckily, I had managed to source some new and reclaimed tiles locally and so we replaced these and then re-grouted. We then left the tiles overnight to dry.

Sealing a Victorian Tiled Hallway Floor

Returning in the morning a consolidator primer seal was then applied using Tile Doctor Colour Grow which improves colour followed by four applications of Tile Doctor Seal & Go this is a specially formulated water-based blend of acrylic polymers that provides both a stain resistant surface and a protective seal as well as a lovely natural satin finish.

Victorian Tiled Hallway After Cleaning Palmers Green Victorian Tiled Hallway After Cleaning Palmers Green

The floor looked so much better and the black and white tiles are now very vibrant, the client is pleased they ripped up the carpet and now have a feature hallway which is in keeping with the property.

Victorian Tiled Hallway After Cleaning Palmers Green

 

Source: Victorian Tiled Hallway Cleaning and Restoration Service in Palmers Green, North London

Small Original Victorian Tiled Hallway Restored in Exeter

I was contacted by the owners of a Victorian terraced house in Exeter who had been lovingly restoring the property over the last couple of years and during the work they uncovered this section of tiled flooring and had decided to bring me in to make it look its best. It’s possible that this section of floor was all that was left from when the house was built over 100 years ago and at some point, in the past the rest of the floor was removed and replaced with something more modern.

Exeter has an abundance of character properties and there seems to be a bit of a trend to restore period features such as fireplaces and old floors at present. It’s always worth looking under old carpets and vinyl in the search of classic floors such as this, particularly if your neighbours have them, after all it will add value!

I visited the property to take a closer look and to take some moisture readings because these old floors were laid without a damp proof membrane and high moisture levels can restrict when this type of work can be carried out due to the sealer needing the floor to be dry(ish) in order to cure. I also did a test clean on one section of the floor to show the customer what level of cleaning could be achieved and inspected the floor for loose tiles to see if any replacement tiles would need to be sourced.

Small Victorian Tiled Hallway Entrance Exeter Before Cleaning

Cleaning Victorian Tiled Reception Area

With the customers happy with the quote I returned to complete the work starting by protecting the skirting and bottom of the stair carpet. Once done I began the cleaning process by applying a strong stripper/degreaser called Tile Doctor Pro-Clean on to the floor. For best results you need to achieve an even coverage and keeping and check it regularly to ensure it doesn’t dry out. After a short dwell time I set to work scrubbing the floor with a 400-grit diamond burnishing pad fitted to a rotary buffing machine. This really works the cleaning product into the pores of the tiles releasing the dirt and removes any sealers or other old coatings in the process. These large 17” pads do struggle to reach into the corners and edges of the floor however, so I always finish off with a hand-held diamond block. Once I was satisfied that the tiles were as good as they could be I rinsed the floor of the alkaline cleaner and dirty water and extracted the soil using a wet vacuum.

Next step was to give the floor what we like to call and Acid Rinse or Acid Wash as some of my colleagues refer to it. We don’t normally use acidic products on tile or stone however they are particularly good at dealing with mineral sales and removing grout smears. Old floors like these are particularly vulnerable to a natural process called efflorescence which results in white mineral salt deposits being left on the surface of the tile as the floor fully dries out and can interfere with the sealer. To counter this, the floor is cleaned with Tile Doctor Grout Clean-up, which is an acid-based product that will neutralise the alkalinity in the floor. The solution is quickly scrubbed into the floor and then rinsed off with water.

Before I left for the day I fixed any loose tiles back into place, re-grouted where needed and left an air mover on the floor to aid in the drying of the tiles. If there are radiators in the area I also suggest that they are turned on overnight to further aid the drying process. Occasionally these types of floors need to be left for several days to dry but it is worth the wait and the floors can be used in the meantime provided indoor shoes and socks only are used and care is taken not to get the floor dirty.

Sealing an Original Victorian Tiled Hallway and Entrance Lobby

Upon returning the next day I tested the moisture content of the floor and was pleased to find that it was well within acceptable levels for the application of the sealer that I was planning to use.

I quickly checked the floor for areas that I felt may be able to be improved and once satisfied I started the sealing process by applying a single coat of Tile Doctor Colour Grow which is an impregnating sealer that soaks into the pores of the tile protecting it from within and improving the colours in the tile beforehand. This was following with two coats of Tile Doctor Seal and Go that will add further protection and give the floor a subtle satin finish.

Small Victorian Tiled Hallway Entrance Exeter After Cleaning

The customers were thrilled and said that they wished they had brought me in sooner! For aftercare I left the customer with some guidance on care and maintenance of the floor as well as a suitable bottle of neutral tile cleaner.

 

Source: Victorian Tile Cleaning and Repair Service in Exeter, Devon

Dirty Victorian Tiled Hallway Renovated in Abergavenny, Monmouthshire

This lovely Victorian tiled floor was located in the hallway of a beautiful house in Abergavenny which is an old Market Town that dates back to Roman times on the outskirts of the Brecon Beacons national park.

Victorian Tiled Hallway Before Cleaning Abergavenny

It has been sometime since it was last given a thorough clean and seal and was now in need of some TLC to give it a new lease of life and have a chance to take centre stage again. The floor was in excellent condition, but the old sealer had worn off in the high traffic areas and dirt had now penetrated the pores of the clay tiles making it difficult to maintain effectively.

Victorian Tiled Hallway Before Cleaning Abergavenny

Repairing and Cleaning Dirty Victorian Tiles

To get the tile and grout clean and remove what remained of the old sealer I applied a 50/50 mixture of Tile Doctor Pro-Clean combined with Remove and Go. This was further diluted with water and applied to the floor for ten minutes, so it could soak into the tile and get to work breaking down the old sealers and dirt. The solution was then worked into the tile and grout using a 17” black scrubbing pad fitted to a rotary buffer machine running on slow speed to reduce splashing. This process released the years of grime and dirt build up from the floor and a wet vacuum was used to extract the soil.

I gave the floor a rinse with water which was then removed using the wet vacuum and the floor inspected to ensure it was clean and that what was let of the old sealer was now removed. There were a few stubborn areas than needed attention, so the treatment was repeated until I was satisfied.

The floor was then given a thorough rinse to remove any trace of cleaning products and then dried with the wet vacuum to remove as much moisture as possible. It’s not wise to apply sealer when the floor is still damp so once I was done cleaning I left for the day so that is could dry off fully overnight.

Sealing Victorian Tiles

My first task upon returning to the property the next day was to check for any dampness. If you neglect to remove all excess moisture from the surface of the tiles before sealing it is more than likely going to cloud the sealer, rendering it less effective I’m protecting the stone against ingrained dirt and stains.

Once satisfied that the floor was completely dry I was able to complete the renovation by applying several coats of Tile Doctor Seal and Go which is a topical sealant that works really well on Victorian tiles and leaves a lovely satin finish that brings out the colours.

Victorian Tiled Hallway After Cleaning Abergavenny

My customer was very pleased with the outcome and left the following comment on the Tile Doctor feedback system.

Paul was very professional and did a fantastic job with our Victorian tiled hallway. It looks so much better. I would definitely recommend Tile doctor to anyone needing cleaning or restoring of tiles.
Sarah T, Abergavenny

Victorian Tiled Hallway After Cleaning Abergavenny

Source: Victorian Tile Cleaning and Sealing Service in Abergavenny, Monmouthshire

Restoring Victorian Tiles Discovered under Laminate in Stafford

The photographs below are of a Victorian Tiled Hallway I recently restored in Stafford. This lovely floor was discovered underneath laminate flooring I can only assume because a previous owner of the house couldn’t work out how to restore it as it was in a terrible state and decided to cover it up.

Fortunately thanks to the power of the internet the current owner discovered Tile Doctor on-line and called us in to have a look with the aim of restoring the floor as a period feature.

Victorian Tiled Hallway Before Restoration Stafford

Restoring a Victorian Tiled Hallway

Laminate is laid as a floating floor so unlike vinyl or carpet coverings that I usually deal with the laminate had if anything protected what was essential a very dirty Victorian tiled floor that was stained with adhesive and paint splashes.

With the laminate flooring already removed by the owner my preparation consisted of adding protection to the wooden paintwork. Once done I started to tackle the dirt by applying a strong dilution of Tile Doctor Pro-Clean and leaving it to soak into the tile and grout for about fifteen minutes. Then with a rotary machine fitted with a black scrubbing pad and running at slow speed I set about scrubbing the floor to get as much ingrained dirt out of pores of the Victorian floor tiles as possible. Once that was done I rinsed off the now soiled cleaning solution with water and then extracted it with a wet vacuum.

This action made a huge difference to the tile and grout, but the paint and adhesive stains were more difficult to remove so these areas were treated with Tile Doctor Remove and Go assisted with a steamer to help draw the staining out.

With the tile ad grout now clean of dirt and stains I gave the floor a rinse with water to remove any trace of cleaning products and then extracted as much moisture from as possible using the wet vacuum. I then left for the day allowing the floor to dry off fully overnight.

Sealing Victorian floor Tiles

The next day I confirmed the floor had dried off and then proceeded to apply five coats of Tile Doctor Seal & Go Extra which is a fully breathable sealer that adds a lovely shine to the tiles. I used a fully breathable sealer as these old houses were built before the invention of the damp proof course and I wanted to ensure that any moisture could rise through the floor and evaporate unhindered.

Victorian Tiled Hallway After Restoration Stafford

The final photograph shows the huge transformation I achieved with the floor and as you can imagine my customer was very happy with the result.
 
 
Source: Victorian Tile Cleaning and Restoration Service in Stafford, Staffordshire

Rebuilding and Restoring a Victorian Hallway in Shipley

Shipley is a town in West Yorkshire that was heavily shaped by the Industrial Revolution and the Victorian period. It became particularly well-known for its textile industry and some of the original mills in which textiles were manufactured still survive in the town today. Being in West Yorkshire, Shipley is also part of what is commonly known as ‘Brontë country’ – once home to the famous Brontë sisters.

Many Victorian era properties still survive in the area too and all too often the original Victorian tiled floors contained within are not well maintained. I recently visited a customer in Shipley who had a Victorian tiled hallway that was in need of a deep clean and seal. What’s more, the customer told me that there were around 20 loose tiles in the hallway that would need to be reinstalled.

Victorian Hallway Shipley Before Cleaning Victorian Hallway Shipley Before Cleaning

On the first day, I started by refitting the 20 loose tiles in the hallway. The problem however was a lot worse than originally thought and, in the end, I had to take up 108 tiles, so I could rebuild the base of the floor, and then relay them. This process took up most of the day but at least the adhesive and grout would be set in time for cleaning the next day.

Cleaning a Dirty Victorian Tiled Hallway

On day two I focused on deep cleaning the tiles and removing any remaining sealer by applying a strong dilution of Tile Doctor Pro-Clean. Pro-Clean is a strong alkaline heavy-duty tile and grout cleaner that serves the purpose of both cleaning the stone and when used in a strong dilution will strip off sealers.

I applied the Pro Clean liberally across the length of the hallway and left it to soak into the tiles for about twenty minutes. This allows the product time to breakdown the sealer and dirt before being scrubbed in with a black scrubbing pad.

Special attention had to be paid to parts of the floor which had suffered paint splashes from previous decoration. I was also surprised to find that there were even some chewing gum stains marking the tiles. These were removed using the combination of a steam cleaner, more Pro-Clean and the careful use of a handheld scraper.

The floor was then given a thorough rinse with fresh water and then dried as much as possible with a wet vacuum. It was then also left to dry off overnight.

Sealing a Victorian Tiled Hallway

Upon returning to the property the next day I checked for any moisture issues with a damp tester. Thankfully, the floor proved dry and I could proceed with sealing the tiles which was done using four coats of Tile Doctor Seal and Go that leaves a deep satin finish that the customer had requested.

Victorian Hallway Shipley After Cleaning Victorian Hallway Shipley After Cleaning

 
 
Source: Victorian Tile Cleaning and Sealing Service in Shipley, Yorkshire

Old Victorian Hallway Renovated at Torver Near Coniston Water

We were recently asked to restore an old tiled floor that had been laid in a Basket Weave Pattern in the hallway of a property in Torver which is a small hamlet on the outskirts of Coniston Water in the Lake District. Torver has a long history however it really took off with the arrival of the Coniston to Broughton-in-Furness railway line in 1859 which was used to transport stone and Slate from the local mines. Many of the properties in the Coniston and Torver areas date from the Victorian period and contain original stone and tiled floors.

This tiled floor had been revealed when the existing carpet was removed by the new owners. It proved to be in quite good condition despite being covered for a long period, but it nevertheless suffered from the usual age-related issues. It needed an intense clean and a fresh seal, including the removal of deeply ingrained dirt, paint stains, glue deposits and bitumen.

After inspecting the situation, the quote we offered the customer was accepted and a date was arranged for us to return to complete the work.

Deep Cleaning an Original Victorian Tiled Floor

Our first course of action was to clean the edges of the floor, to remove the glue deposits and carpet underlay residue. This was achieved using the careful application of a sharp scraping tool and handheld burnishing blocks combined with a couple of Tile Doctor cleaning products.

Victorian Floor Tiles During Renovation Torver

The first product applied was Tile Doctor NanoTech HBU (Heavy Build-up Remover) which is a strong alkaline product specially formulated with nano-sized cleaning particles to penetrated deep into the stone and dissolve deeply ingrained dirt and stains. The second product was Tile Doctor Remove and Go, a heavy-duty coatings remover which works well particularly well at removing glue deposits, paint, and synthetic coatings.

We then addressed the rest of the floor using a coarse 200-grit burnishing pad attached to a slow speed rotary cleaning machine, applied with water as the lubricant. We used this in small areas to intensely clean the surface of the floor. The resultant slurry was then extracted from the floor a powerful wet vacuum.

The floor was then rinsed again with water and the moisture was wet vacuumed before we moved onto the next area. Once the floor was completely scrubbed and rinsed, and any remaining glue and paint issues were retreated using the same methods we used on the floor edges, we then moved onto the final phase of the clean.

The last step in the cleaning process involved giving the floor an acid wash to deal with any potential salt issues (efflorescence) which can result in white salt deposits appearing on the surface of the tiles as they dry. Damp proof membranes that can prevent this problem are a relatively modern invention, so this can be a real issue for old floors from the Victorian era, particularly if the floor has had damp issues in the past. The floor was washed with a 1:3 dilution of Tile Doctor Grout Clean-Up which being acidic effectively counteracts the alkaline salts. The floor was then given another rinse to remove any trace of cleaning products and then left to dry off.

Sealing an Original Victorian Tiled Floor

We actually left the floor to dry out for three full days and upon our returning to the property several moisture readings were taken to ensure the floor was dry enough to take a fresh seal.

Victorian Basket Weave Lay During Sealing in Torver

The customer had requested a natural-looking matte finish to the floor. We have the perfect product to provide this type of finish, so we proceeded to apply three coats of Tile Doctor Colour Grow, an impregnating sealer which naturally enhances the colours in the tile, additionally it’s a fully breathable sealer so moisture can easily rise through the floor.

Victorian Basket Weave Lay After Renovation Torver

As you can see from the photographs taken during the various stages of the restoration, the intense clean and fresh seal greatly enhanced the appearance of the floor – much more so than could have been achieved with everyday products and methods. The customer was very pleased indeed.

Victorian Basket Weave Lay After Renovation Torver

 
 
Source: Victorian Tile Cleaning and Sealing Service in Cumbria

Carper Stained Victorian Hallway Restoration in Streatham, South London

If you like in an older property in the UK and never looked under the carpets you might want to take a minute and have a look. I still find it surprising how many of my customers had no idea they lived in a house with a classic tiled hallway.

We were recently asked to restore a fantastic geometric-patterned Victorian tiled floor which had been found underneath carpet during decoration work in the hallway of a property in Streatham.

Victorian Tiled Hallway Before Restoration Streatham Victorian Tiled Hallway Before Restoration Streatham

The once black and white tiles were now absolutely caked in dirt, glue deposits, cement, paint stains and plaster. It would be no small feat to get the tiles back to looking their best again. Fortunately, Victorian tiles are very resilient and we have a lot of experience in their restoration so I was confident that with the right products and techniques we could get the job done to a high standard.

Cleaning Dirty and Stained Victorian Hallway Tiles

The tiled hallway was quite long, yet only around a metre wide, so I felt the best approach would be to work in small sections at a time. Our method was to soak the tiles with Tile Doctor Remove and Go and leave the product to work its magic for roughly ten minutes, before scrubbing the surface to remove the muck. Some of the more viscous and stubborn stains were scrapped away carefully by hand within the assistance of a steam cleaning machine. The resulting residue was extracted using a wet vacuum. Remove and Go is a particularly effective cleaner in scenarios like this, as it is specially formulated to strip away old sealers, adhesives and even paint without harming the tile itself.

The next step was to run a rotary machine fitted with a Coarse 200 grit burnishing pad lubricated with water over the floor to achieve a consistent finish. The floor was then rinsed to remove the soil generated in the process.

Old floors like these laid before the invention of damp proof membranes can be a concern as damp rising up through the tile as it dries can leads to efflorescence salt deposits appearing on the tile surface. So, to avoid potential issues Tile Doctor Acid Gel was applied to the floor to neutralise any salt deposits and the floor given a final rinse to remove any trace of cleaning products.

Sealing Victorian Hallway Tiles

After finishing the clean, we left the floor to dry out over the weekend. With old floors like this one, we tend to recommend allowing a drying period of at least 48 hours to ensure the floor is completely dry before applying a sealer.

Upon arriving back at the property, we ran a few quick damp tests and once satisfied the floor was dry proceeded to seal the tiles using Tile Doctor Colour Grow. Colour Grow is a colour-intensifying, impregnating sealant that leaves a natural-look matte finish. It works by occupying the pores in the clay and it’s also a fully breathable sealer which is important for these old floors where damp may be any issue.

Victorian Tiled Hallway After Restoration Streatham Victorian Tiled Hallway After Restoration Streatham

The customer was absolutely thrilled with the results. She even went as far as to leave a review expressing how pleased she was during the weekend before we had chance to seal the tiles.

Bill and Wayne were brilliant! On time, got to work straight away, lovely and friendly and very professional. They have done a lovely job and I’m looking forward to them coming to seal the tiles to finish it o f tomorrow afternoon. Wouldn’t hesitate to recommend. Thanks guys!
 
 
Source: Victorian Tile Cleaning and Renovation Service in South London

Renovating a Dull Victorian Entrance in Edinburgh

If you visit Victorian era houses throughout the UK, you will find that many them have colourful tiled entranceways (also sometimes known as vestibules). The tiles are commonly made from encaustic cement, stylised with distinct geometric patterns that really help to add character to the property.

The reign of Queen Victoria was a prosperous and confident time for Scotland – and many new houses and buildings were built in the well-known ‘Victorian’ style during the period. One of the best-known buildings to be built was Balmoral Castle, which is still in use by the Royal Family as a holiday home.

Homeowners who are fortunate enough to be in possession of original Victorian tiles will find that they are not easy to keep clean without the right products and methods. The entrance to any house of course is subject to high amounts of foot traffic, which means the tiles can become dirt and discoloured very quickly indeed.

Here is an example that we cleaned and sealed recently in Edinburgh, although in good physical condition for its age the sealer on the floor had worn off and dirt had become ingrained in the tile reducing its overall appearance.

Small Victorian Porch Before Cleaning Edinburgh

Cleaning Dirty and Discoloured Victorian Tiles

Having restored hundreds of Victorian tiled floors in the past, Tile Doctor has developed tried and tested methods for cleaning all types of tiled floors so tackling this small floor would not be a problem.

To begin, we gave the floor a deep clean to break down any old sealants and to cut through thick layers of dirt and grime. The cleaning solution we employed consisted of two products: Tile Doctor Pro Clean (which is a strong alkaline cleaner) and Tile Doctor Remove and Go (which is a stripping agent formulated for the removal of old sealants, synthetic coatings, glues, and paints). The solution is applied and left to soak into the tile for ten to twenty minutes before being scrubbed in, which for a small area such as this needs to be done by hand. The soiled solution is then rinsed off with water and this is then extracted using a wet vacuum. This deep cleaning process was repeated several times to make sure the tiles were as clean as possible.

Once we were happy that all the dirt and grime had been removed, we gave the floor a quick acid wash using Tile Doctor Grout Clean-Up to remove any old grout smears and to neutralise any potential salt efflorescence issues. The floor was then given a final rinse before leaving it to dry off fully overnight and a turbo air mover was left running to help speed up the process and ensure the floor was completely dry to be sealed the following day.

We are very conscious of the fact that many of these old Victorian tiled floors to have damp-proof membranes installed beneath them, so we wanted to guarantee there would be no damp issues that would prevent us from applying a fresh sealant. This is because even a small amount of excess moisture can potentially damage the performance of the sealant.

Sealing an Original Victorian Tiled Entrance

Returning to the property on the second day, we proceed to seal the tiles with three coats of Tile Doctor Colour Grow. This sealant soaks into the pores of the tile protecting it from within and providing long term protection, it also enhances the colours in the tile in the process.

The difference made by this two-day restoration is shown below. It is quite amazing how quickly these results can be achieved considering the age and previous condition of the tiles. Our customer was absolutely thrilled.

Small Victorian Porch After Cleaning Edinburgh

 
 
Source: Victorian Tile Cleaning and Sealing Service in Edinburgh

Renovating a Small Victorian Tiled Entrance in Glasgow’s West End

Vestibules (aka entranceways) are not that commonly found in new build houses, but they certainly were a popular architectural feature back in the Victorian period. Many of the Victorian properties which are still in use today still contain their original geometric patterned encaustic cement tiles. These tiles can be very beautiful and colourful – that is if they’re kept looking that way with routine cleaning and maintenance.

I recently visited a Victorian property in Glasgow’s West End to carry out the restoration of one of these tiled floor vestibules. This Victorian tiled vestibule was in truly awful condition. Not only were the tiles caked in years’ worth of muck and paint stains – some of the tiles were completely missing or, at the very least, loose and damaged.

Small Victorian Vestibule Before Restoration

I could see that restoring these tiles back to their peak condition would require several days of work however the owner has keen to get the work done so we set a date for my return to complete the work.

Cleaning and Rebuilding Damaged Victorian Entranceway Tiles

On the first day of work, our priority was to undertake a much needed deep clean of the tiles. This was done using Tile Doctor Pro Clean combined with Tile Doctor Remove and Go. Pro Clean is an alkaline-based cleaner specialised for heavy soil removal, while Remove and Go is formulated to strip away any old sealers, as well as the paint splashes that were very prominent on these tiles.

Small Victorian Vestibule During Restoration

Th combined cleaning solution was left to dwell for a short period of time on the surface of the floor before being scrubbed into the tiles to cut through the thick muck. A steaming machine was used to ensure the products penetrated deep into the pores of the stone to extract ingrained dirt.

During the cleaning process, we could identify which tiles were loose, damaged and missing. These tiles were carefully removed and put to one side. Once the clean was completed the tiles were left to dry off overnight.

The next the floor had dried, and we started to rebuild the floor. This involved installing and grouting new tiles that we had previously sourced for the job to match as closely possible with the original pattern of the floor.

Next, the newly installed tiles were left to set, before we gave the floor an acid rinse using Tile Doctor Grout Clean-Up. This product removed any grout haze from the tiles and will neutralise any efflorescence salts that may rise up through the tiles as they dry. This issue can be quite a problem with older properties which don’t have a damp proof course installed.

Sealing a Victorian Tiled Vestibule

Once again, we left the floor to dry out completely overnight, this is especially important when applying a sealer to a tile as sealing damp tiles will lead to issues. We recommend the use of a damp meter at this point to ensure the tiles are indeed dry before sealing.

To seal the floor, we used three coats of Tile Doctor Colour Grow, which is ideal for these uniquely patterned Victorian tiles as it intensifies the different colours in the stone, while also offering a natural-look matte finish. Of course, the sealer will also provide the tiles with lasting protection again dirt and muck and is also breathable so any damp rising up through from the sub floor will be able to evaporate.

Photos really do speak louder than words in this case, as the restoration achieve some fantastic results. Take a look at the photo below – I’m sure you’ll agree the difference is incredible. Certainly, our very happy customer seemed to think so!

Small Victorian Vestibule After Restoration

 
 
Source: Victorian Tile Cleaning and Sealing Service in Glasgow

Renovating Victorian Tiled Entrance for Listed Building in Edinburgh

These are photos of a Victorian tiled floor we renovated at the new Scottish head office of the Peoples Postcode Lottery in the centre of Edinburgh City where the building was going through a multi million pound refurbishment. Edinburgh has a lot of Georgian and Victorian architecture, much of which is listed and as a result many still have original Victorian tiled flooring.

I’ve not really looked at the Postcode Lottery until now but put simply you give the lottery £10 a month and your postcode is your winning ticket number, there are prize draws every day and if your postcode comes up every one in the system with that postcode wins; they also give 31% to charity which is impressive.

Victorian Tiled Floor Before Cleaning Postcode Lottery HQ Edinburgh

Cleaning Original Victorian Tiles

You can see from the photograph that the floor was in good physical condition but was looking tired and dull. This is not unusual for Victorian tiles as once the sealer wears down dirt can penetrate into the pores of the tile causing it to lose its appearance.

On the first day we set about stripping the floor of what remained of the old sealant using a strong dilution of Tile Doctor Pro-Clean which is an industrial strength alkaline tile and grout cleaning product that is safe to use on Tile and Stone. The product is applied to the floor, left to soak in for ten minutes and the scrubbed into the tile using a black scrubbing pad fitted to a rotary bonnet machine. The floor was then rinsed and the now soiled cleaning solution extracted using a wet vacuum.

The process was repeated several times until we were happy the floor was clean and free of sealer and then given a final rinse with water. Before leaving for the day the floor was dried as much as possible using the wet vacuum to extract as much moisture as possible.

Sealing Original Victorian Tiles

On the second day our first task was to check the floor with a damp meter in several places to ensure the tiles had dried off overnight. All was well and we began the process of sealing the floor with a Tile Doctor Seal and Go. This is a topical sealer which provides a high-quality low-sheen finish and protection against ingrained dirt and stains.

Victorian Tiled Floor After Cleaning Postcode Lottery HQ Edinburgh

Victorian tiles are quite porous and five coats were needed to fully seal the floor. This took some time to complete as you have to wait until the first coat is dry before applying the next however it was well worth the effort as the floor looked fantastic afterwards.
 
 
Source: Victorian Tile Cleaning and Restoration Service in Edinburgh, Lothian

Maintaining Victorian Tiled Enterance in Yorkshire Spa-Town

Most stone and tile benefit from the protection that a sealer provides to stop dirt becoming ingrained into its pores. However, the act of walking on the tile causes wear and this over time will lead to the sealer wearing off and dirt reaching the pores; the worse thing is you rarely notice it happening because it takes a long time to wear down a sealer.

Most of my customers have this problem and call on me to clean and reseal the floors every few years when it becomes difficult to clean effectively. The alternative which I do for a number of my clients is to have the floor lightly cleaned and a new layer of sealer added every six to twelve months.

This Victorian tiled entrance at a period house in Ilkley was not in too bad a shape just a little dirty and dull and the owner was keen to have is renovated in the run up to the Christmas holidays. Ilkley is a lovely town in West Yorkshire which became very fashionable in the Victorian era due to the health benefits of the local water, this led to a lot of Victorian architecture and tiled entrance floors like this one are very typical in the area.

Victorian Tiled Entrance Ilkley Before Cleaning Victorian Tiled Entrance Ilkley Before Cleaning

Cleaning a Victorian Tiled Entranceway

To get the dirt out of the tile and grout I applied a strong dilution of Tile Doctor Pro-Clean to the tiles and left it to soak in for fifteen minutes. Pro-Clean is a very reliable cleaner for all types of tile and grout including natural stone, Limestone, Slate and Travertine, amongst others; additionally, when used in a strong dilution it will strip off old sealers. The solution was then worked into the tile using a black scrubbing pad fitted to a rotary machine and the soil extracted using a wet vacuum.

I gave the floor a light rinse with water to remove any trace of cleaning products and then inspected the floor to ensure it was up to standard. At this point I could see there were flecks of paint on the tile around the edges of the floor from previous decorating work and, so I removed carefully removed these with a scrapper and a hand-held diamond block.

The floor was given a final rinse and the wet vacuum used to extract as much moisture from the floor as possible before leaving it to dry for the evening.

Sealing a Victorian Tiled Entrance with a Matt Finish

I returned the next day to seal the floor first discussing the finish that the customer wanted for the tiles. Typically, I recommend using a satin sealer for Victorian tiles as it adds a nice sheen to the tile however surprisingly the owner wanted a matt finish.

Tile Doctor has a full range of sealers available to cater for all requirements so for this floor I applied three coats of Tile Doctor Colour Grow which leaves a matt finish whilst enriching the colours in the tile.

Victorian Tiled Entrance Ilkley After Cleaning

The tiles are now full of life and with the paint specs removed there is now a crisp black edge between the floor and the skirting which the customer also picked up on.

Victorian Tiled Entrance Ilkley Before Cleaning

 
 
Source: Victorian Tile Cleaning and Renovation Service in West Yorkshire

Old Victorian Hallway Restored in the Black Country

Sandwell forms part of an area in the West Midlands which is popularly referred to as the ‘Black Country’. This area industrialised rapidly during the Victorian period and, with the building of many new factories came the building of many new houses for workers.

A good number of these Victorian properties survive, complete with original Victorian tiled floors. However, homeowners aren’t always aware that these tiled floors exist, since they have often been covered up by carpet or linoleum. We find that when new homeowners discover these original tiles, they are usually keen to restore them to their best possible appearance. This requires professional assistance.

Victorian Tiled Floor Before Renovation Warley

A customer who lives in the Warley district of Sandwell recently contacted me about the restoration of a 120-year old Victorian tiled hallway that they had discovered underneath an existing carpet. As expected, the tiles were caked in deposits of adhesive, cement and paint which had accumulated over several years. Making matters worse, the customer had also spilt more paint on the tiles during decoration work.

Victorian Tiled Floor Before Renovation Warley

Cleaning an Original Victorian Tiled Hallway

I began the restoration by cleaning the tiles with Tile Doctor Pro-Clean, a strong alkaline cleaner which is perfect for removing grime from heavily soiled and neglected natural stone. The product was applied liberally across the area and left to dwell for a short period. It was then worked into the tiles using a specialised rotary cleaning machine fitted with a black scrubbing pad.

The now soiled cleaning solution was subsequently rinsed away and the floor then rinsed with clean water. Stubborn paint marks and cement were carefully scraped off the tiles by hand. A solution which combined more Pro-Clean and Tile Doctor Remove and Go (a stripping agent) was applied to the tiles to help remove any old and now ineffectual sealer, as well to fully remove any of the particularly stubborn marks.

After being worked in again with a scrubbing pad fitted to a rotary machine, the excess cleaning product was rinsed away using water and the floor was dried off with a wet vacuum.

As tiles of this age were usually laid without a damp membrane in place underneath them, they can be especially prone to efflorescence (salt) deposits. To help prevent this, Tile Doctor Acid Gel, which is a combination of phosphoric and hydrochloric acids, was applied. This will help to neutralise any alkaline salts that might threaten to penetrate up through the tiles to leave unsightly white marks.

After the floor was rinsed once again, I proceeded to re-grout a few areas of the floor where the grout had worn away over the years. Once I was happy with the clean tiles and fresh grout, I left the floor to dry off overnight.

Sealing an Original Victorian Tiled Hallway

The next day the tiles had thankfully dried completely and were ready to be sealed. Since the customer had requested a sheen finish, as opposed to be a natural matte finish, I opted to use a combination of two different sealants.

The first to be applied – to bring out the colour in the tiles – was Tile Doctor Colour Grow. This product impregnates the tiles to protect them against ingrained dirt, but it leaves a matte finish. Therefore, I added five coats of Tile Doctor Seal and Go to provide not only extra protection, but also a high-quality sheen finish.

Victorian Tiled Floor After Renovation Warley Victorian Tiled Floor After Renovation Warley

I left the customer, who was delighted with the results, with a bottle of Tile Doctor Neutral Tile Cleaner. This product will serve as a reliable cleaning product for the routine maintenance of the tiles, ensuring they continue to look fantastic.
 
 
Source: Victorian Tiled Floor Cleaning and Sealing Service in Birmingham

Dirty and Paint Marked Victorian Tiled Lobby Deep Cleaned Near Leeds

Roundhay is an affluent area of North Leeds which is well-known for the fantastic Roundhay Park. The park is large enough to contain two lakes, extensive woodland, formal gardens and even golf courses! It’s the premier attraction for anyone fortunate enough to live in the area, or anyone visiting from nearby.

I recently visited a customer who lives in Roundhay and was looking for help in restoring the small Victorian tiled entranceway at the front of her house. The tiles were in a shocking state, but it’s not hard to imagine why – the entrance to a house receives a lot of foot traffic and is not typically taken care of regularly. These tiles were also marked with paint splashes left over from decoration work, making them look even worse.

Small Victorian Entrance Before Cleaning Roundhay

The appearance of the entranceway did not set the right standard for the rest of the house, so the property owner was keen to have it restored professionally.

Cleaning a Victorian Tiled Entranceway

I informed the customer that I could have the tiles rejuvenated within a day’s work. To begin, I used a scrapper and wire wool brush to manually remove some of the most stubborn paint marks.

Following this, I applied a strong solution of Tile Doctor Remove and Go, before leaving the product to dwell for about an hour. Remove and Go is multi-purpose stripping agent that can remove any adhesive and paint deposits, as well as many types of old coatings and sealers.

To work the product deep into the tiles, I agitated with an abrasive cleaning pad and then rinsed the area with fresh water. This had the desired affect and all the unsightly paint marks were removed.

Next, I gave the floor another thorough clean to remove any general muck and ingrained dirt. This was done using our high-alkaline cleaner, which we typically use on Victorian tiles, known as Tile Doctor Pro-Clean. In fact, Pro-Clean is a very reliable cleaner for all types of tile and grout including natural stone, Limestone, Slate and Travertine, amongst others.

Sealing a Victorian Tiled Entranceway

Since I told the customer I would able to finish the job within a day, I dried the floor quickly using a heat gun so it could be sealed there and then. To seal the floor, I applied four coats of Tile Doctor Seal and Go, which is a topical sealer formulated to provide maximum protection along with a high-quality, low sheen finish.

Small Victorian Entrance After Cleaning Roundhay

As you can see from the photos above, the entranceway was absolutely transformed. These tiles are now a true asset to the rest of the property, rather than looking out of place! I’m please to say my customer was amazed by how quickly such a big difference could be made and left the following glowing feedback.

I can’t believe the before and after pictures. The restoration of the tiles is top quality, they are so much brighter and richer in colour – especially without the garage paint hiding the detail! Nigel did an amazing job, even better than I could have hoped for, and is a lovely guy as well. Would definitely recommend.
 
 
Source: Victorian Tiled Floor Cleaning and Sealing Service in North Yorkshire

Victorian Tiled Hallway Relaid and Renovated in South Cumbria

A customer who lives in Kendal recently called us out to examine their Victorian tiled hallway which when walked upon, sounded like it was a making a crunching noise. This may seem like an odd phenomenon, but it can be reasonably easily explained. These tiles, being made of Victorian-style encaustic cement, are very hard-wearing. However, the cement screed upon which they were laid had lost its bond with the tiles and the tiles were now loose.

Most other types of tile would crack under the pressure of being walked upon, but since Victorian tiles are quite small and hard-wearing, they don’t seem to suffer this problem. Instead, they just make this crunching noise when walked upon.

So, what would we need to do to resolve the situation? In theory, it should be the simple matter of taking up the loose tiles and relaying them. Yet this takes a lot of preparation, including removing the old cement from the back and sides of the individual tiles and then smoothening the floor so that the tiles can be re-laid flat. This is easier said than done with a floor of this age.

Victorian Tiled Hallway Being Relaid in Kendal

Repairing and Cleaning Loose Victorian Tiles

We began the restoration by lifting the loose tiles, cleaning the old cement off and then re-laying them using a suitable tile adhesive. Once the adhesive had set, we grouted the tiles with a grout that matched the original.

Victorian Tiled Hallway After Being Relaid and Grouted in Kendal

The floor was left to set overnight, and we returned to the property the next day. The floor was checked and then we carried out a full deep clean of tiles using Tile Doctor Pro Clean, our go-to cleaning product for tile, stone and grout. The product, which is alkaline-based, was worked into the tiles using a black buffing pad fitted to a rotary machine.

In some of the harder to reach areas and corners of the room – those which the buffing rotary machine struggles to reach – we used diamond-encrusted handheld blocks to grind away the stubborn dirt and stains.

The soiled cleaning solution was rinsed off the tiles with water and extracted using a wet vacuum to get the as much moisture off the tiles as possible.

Sealing Victorian Tiles

After the cleaning process was complete, we left the floor for another few days to dry off completely. A suitable drying period is especially important for Victorian tiles, since most of these old properties do not have a damp proof membrane installed.

We then returned to seal the tiles with several coats of a breathable, impregnating sealer called Tile Doctor Colour Grow that not only protects it also enhances the natural colours in the tile. Now, much to the customer’s pleasure the tiles are fully functional again with there’s no crunching noise when you walk on them. They also look amazing as well.

You will see in the photos below the level of work that goes into a job like this but, as this is an original Victorian floor, a restoration will add great value to the house upon re-sale.

Victorian Tiled Hallway After Full Restoration in Kendal

 
 
Source: Victorian Tile Cleaning and Renovation Service in South Cumbria

Investing in Property with a Period Victorian Floor Restoration in Lancashire

A property investor contacted Tile Doctor to see if we could help renovate a property that was to be sold in few weeks’ time. To get maximum value from the investment she wanted to preserve the character and period features of the house including the Victorian Tiled Hallway floor, which as you can see from the photograph below was in need a bit of TLC!.

Victorian tiled floors and other period features have become very popular in recent years and are often discovered under hallway carpets covered in years of dirt. Fortunately, they are very resilient and with the right techniques and products can be restored back to their former glory.

Victorian Tiles Before Renovation Burnley

On our initial visit I conducted a survey of the floor to check its condition and work out the most suitable products and methods to employ to restore it. One of the main concerns we have with these old floors is damp as damp-proof membranes were not invented until relatively recently. I have a damp meter to check for this and it did indicate high moisture levels which isn’t really an issue for cleaning the floor but would restrict our choice of sealer to those which are fully breathable and allow moisture to rise-up through the tile. We agreed a price and schedule with the customer and within two weeks we were able to start the work.

Cleaning an Original Victorian Tiled Hallway Floor

The floor was in quite a state, made worse I suspect by recent restoration work by other contractors who unfortunately didn’t take as much care with the floor as the could have done.

After protecting the skirting boards and carpets with film work got underway starting by applying a strong dilution of Tile Doctor Remove and Go to the floor to strip away old sealers and other coatings. This product also helps to break down the paint stains on the surface of the tile, though I also used a handheld scraper, as well as a rotary machine fitted with a black scrubbing pad, to speed up the process. The resultant slurry was rinsed off the floor with water and extracted using a wet vacuum.

With the floor clean of coatings, the next step was to deep clean the tiles with a medium dilution of Tile Doctor Pro-Clean which is an effective Tile and Grout cleaning product that deeply cleans away ingrained stains. Again, we used a black scrubbing pad fitted to a rotary machine to make the job easier. Corners were tough to tackle with a machine, so we had to do them by hand.
The floor was given a final rinse to remove any soil and trace of cleaning product and the wet vacuum was used a final time to extract as much moisture out of the floor as possible. Upon finishing the cleaning, we left the floor for a few days, so it could dry out fully.

Dealing with Efflorescence

When we came back to seal the floor we noticed problems with white salt deposits coming to the surface of the tile a problem known as efflorescence. I had suspected this might become an issue but there was no indication of it happening before so was not overly concerned at the time. However, it meant I could not seal the floor as planned until the efflorescence had been dealt with. Fortunately salts like these can be treated and to resolve the problem I gave the floor a wipe with a solution of Tile Doctor Acid Gel which is a blend of phosphoric and hydrochloric acids in a gel form, formulated to remove grout haze (grout smears) and treat efflorescence. Once this was done the floor was given a light rinse and dried again.

Sealing an Original Victorian Tiled Hallway Floor

I left the floor to dry again for a few more days and on my return, I was pleased to see the problem had not resurfaced and I was able to complete the restoration with the application of a sealer.

To seal the tiles, I used a couple of coats of Tile Doctor Colour Grow, which is a penetrating sealer designed to soak into the pores of the clay thus preventing dirt from becoming ingrained whilst additionally enhancing the colours in the tile. The sealer really deepened the colours in the tile bringing them to life and with Colour Grow being fully breathable there shouldn’t be any issues with damp becoming trapped under the tile and causing issues later.

The customer was delighted with the results (see feedback below) and the work we did should more than pay for itself when the house goes on the market.

“Thoroughly impressed with Kamila, she was so lovely, professional and thorough! Our tiles look amazing and I was especially happy with how quick she sorted that floor out from the first email I sent. Janice M., Burnley”

Victorian Tiled After Renovation Burnley

 
 
Source: Victorian Tile Cleaning and Renovation Service in South Lancashire

Victorian Tiled Hallway Restoration in North London

This lovely Victorian Tiled Hallway was discovered by a couple during the renovation of their home in Woodford Green which is a suburb of Woodford in North East London. The tiles were covered by a hallway carpet and much of it was obscured by concrete floor leveller. Fortunately just enough of the tile was exposed to give an indication of the Black and White Victorian floor underneath.

After initial investigation and discussion on what was possible, we were invited to quote to restore the floor which I’m pleased to say was accepted. The following pictures show an indication of the process we followed to restore the hallway to its former Victorian glory.

Cleaning Victorian Hallway Tiles

The first step was to remove the concrete floor levelling compound which was done very carefully using small hand tools, detail blades and scrapers. This took a lot of work as we did not want to damage the tiles underneath. You can get a feeling for this from the photographs below where we slowly remove the concrete layer over the floor to reveal the Victorian floor underneath.

Removing Concrete Leveller From Victorian Floor Tiles in Woodford Green Removing Concrete Leveller From Victorian Floor Tiles in Woodford Green

Once the Victorian tiles were all uncovered and the cement had been removed we got a good idea of the condition of the tiles and began a deep clean restorative process. The process began by giving the floor an acid wash with Tile Doctor Grout Clean-Up which was left to dwell on the tile for ten minutes before being scrubbed in to release remaining smears of concrete and grout residue on the tiles.

The resultant soil was then removed with a wet vacuum and the floor then cleaned with Tile Doctor Pro-Clean using a similar technique of leaving it to dwell and then scrubbing it in.

Cleaning Victorian Hallway Floor Tiles in Woodford Green

Once cleaned the soiled cleaning product was removed with a wet vacuum and the floor give an thorough rinse with fresh water which was followed by a steam clean to finalised the process.

Cleaning Victorian Hallway Floor Tiles in Woodford Green

With the floor now deep cleaned we moved on to addressing the three door thresholds which needed to be rebuilt to fix loose and replace broken tiles.

Victorian Hallway Floor Tile Threshold After Cleaning in Woodford Green

Sealing Victorian Hallway Tiles

The tiles were left to dry and set overnight and we returned later to seal them with an initial coat of Tile Doctor Colour Grow, an impregnating seal as a primer before re-grouting. Colour Grow is an impregnator that seeps into the pores of the tile protecting it from within and also enhancing the colours in the tile.

Victorian Hallway Floor Tiles Regrouting in Woodford Green

Once the sealer had dried we moved on to grouting those areas which were repaired the previous day with a matching grout colour and then this was left to set

When the grout was set it was time to finish off the sealing this time using five applications of Tile Doctor Seal & Go to provide a natural sheen finish.

Victorian Tiled Hallway Floor After Full Restoration in Woodford Green

As you can see from the picture, the floor has been fully restored to its original condition and with the correct maintenance; it should last for years to come.
 
 
Source: Victorian Tile Cleaning and Restoration Service in London

Restoring an Old Victorian Hallway Floor in Monmouth

This beautiful black & white Victorian tiled hallway was recently discovered hidden under carpet at a house near Monmouth. As well as the years of grime that had become ingrained in the tile, the carpet had been secured with carpet grippers which had been fixed on top of the tiles and the owner was keen to recruit my help in its restoration.

It’s a lovely drive up through the Wye Valley from my base in Caldicot to the town of Monmouth which has a long history that goes back to the Roman times. In fact it’s famous for its “Monnow Bridge” which dates back to medieval times and is the only remaining stone gated bridge of its type left in Britain. Needles to say it has a strong mixture of architecture with many old houses built during Victorian times.

Victorian Floor Before Renovation in Monmouth

Cleaning an Original Victorian Tiled Hallway Floor

The first step in cleaning the floor was to prepare it for cleaning by carefully removing the old carpet grippers and adhesive deposits using a handheld scraper. This was followed by creating a mixture of two powerful cleaning products namely Tile Doctor Remove and Go and NanoTech HBU remover. Remove and Go is a coatings remover designed to strip off old sealers whilst NanoTech HBU is a powerful Heavy Build-Up Remover that uses tiny abrasive particles to clean up tile and stone.

The floor was smothered in the cleaning solution and it was allowed to soak into the tile for about twenty minutes before scrubbing it in. It was not an exceptionally large hallway so a lot of hand scrubbing was required to get the floor as clean as possible. The cleaning solution was rinsed off with water and then extracted using a wet vacuum or wet vac as my colleagues often refer to it.

To finish off the cleaning process I scrubbed a dilution of Tile Doctor Pro-Clean into the grout lines to get them as clean as possible and then gave the floor a final rinse. I need the floor to be dry before sealing so using the wet vac I extracted as much moisture from the floor as possible.

Sealing an Original Victorian Tiled Hallway Floor

I left the floor to dry completely overnight and returned the next day to finish the floor off with a few coats of sealer. On my arrival I started by taking a few reading with a damp meter to ensure the floor was ready to be sealed. Fortunately by efforts with the Wet Vac the night before had paid off and it confirmed the tiles were dry and ready to be sealed.

To do this, I used multiple coats of Tile Doctor Seal and Go which works really well on Victorian Tiles and adds a nice low sheen that brings them up nicely. Naturally the sealer not only improves the way they look it also makes them much easier to clean and will protect them against ingrained dirt and staining.

Victorian Floor After Renovation in Monmouth

I think you will agree this old floor has been transformed and now has a new lease of life.
 
 
Source: Victorian Tile Cleaning and Renovation Service in Monmouthshire