A lady from Camberley had been asking me to restore her Victorian tiled hallway for over a year. This was not due to me I should mention, she’s a shift worker so it had been difficult to schedule a time to visit the property and survey the floor, also she didn’t want her husband to be there as the restoration of the floor was to be a surprise.
We did however mange to get that organised and I was able to inspect the floor. It was very dirty and well overdue a deep clean and seal, however, before that could happen it would be necessary to replace several broken tiles. Fortunately, she had a stash in her garden shed that were in reasonable condition which would do the job very nicely.
Happy with my quote the next hurdle was to agree a date for the work, so we had to delay until such time when the husband would be away.
Repairing and Cleaning a Victorian Tiled Hallway in Camberley
When I finally came to do the work, I started by removing all the broken tiles. I used a serrated edge power chisel for this work taking care not to disturb the adjacent tiles. The holes that are left have to be totally cleared out so the new tiles can slot straight in. Annoyingly the replacement tiles were slightly thicker than the existing ones, so I had to dig down a couple of millimetres to ensure a level floor.
The next step was to clean the floor using Tile Doctor Acid Gel. This is an excellent product that removes ingrained dirt. I brushed it over the floor with a soft brush and left for twenty minutes while I had my lunch in the van. Being a gel it is very easy to control and more importantly you don’t use much water during the process, this means the floor dries quicker and it won’t exacerbate any potential damp issues. This is always a consideration with old Victorian tiled floors as they don’t have a damp proof membrane underneath.
I then sprinkled a covering of water to keep it damp while I introduced a weighted buffer machine to scrub the floor. Attached to the machine was a 100-grit diamond pad. This removes surface dirt leaving a very clean tile. A small amount of water is used to help lubricate the process and all waste was removed with a wet vacuum cleaner.
Sealing a Victorian Tiled Hallway
The work needed to be done in a day, so I used floor fans and a heater to get the floor dry and ready for sealing.
During this time the replacement tiles were slotted into place sticking them down with rapid set adhesive. Another little job that needed doing was to address a gap between the skirting board and the tiles which the client asked my advice over. Always happy to help, I agreed to fill it with transparent mastic.
Once the tiles were dry, I sealed them with Tile Doctor Seal and Go Extra. This gives a sheen finish that enhances colour and last years.
Before leaving I took time to discuss aftercare cleaning and recommended the use of Tile Doctor Neutral Tile Cleaner, it is a gentle but effective product that won’t harm the sealer.
I never got to find out what her husband thought of the the floor, but my client was certainly happy with the transformation once I had finished.
Source: Victorian Tiled Hallway Floor Restoration in Camberley Surrey
Serving West Surrey and the surrounding areas, Rupert Mcleod is your local Tile, Stone and Grout maintenance expert. Additionally he is an agent of Tile Doctor, the largest professional Tile, Stone and grout restorative cleaning network in the UK. Tile Doctor has developed products and techniques to handle a multitude of issues surrounding tile, stone and Victorian Tiled Tile, interior, exterior, domestic or commercial.