Removing Paint Splashes from Victorian Hallway Tiles near Rotherham

The owner of this beautiful Victorian tiled hallway floor in Dinnington had wanted the floor restored for quite some time. The property had many Victorian features, but this floor had an unusual design which made it very special. The owners had researched how to clean it themselves but hadn’t managed to achieve the result they were hoping for. The main problem was that the floor had been spotted with small paint splashes from decades of decorating.

Dinnington officially forms part of in Rotherham and is the same distance from Rotherham as it is from Sheffield. The area was a big coal mining and steel producing area and unfortunately suffered huge job losses throughout the 80’s and 90’s so its not surprising that the local housing stock suffered for many years as a result.

Cleaning/Repairing a Victorian Tiled Hallway Floor

We first treated the floor with Tile Doctor Remove and Go, this acts quickly to break down any old sealers still present on the tiles and softens the old paint splashes. After a ten-minute dwell time a coarse 200-grit burnishing pad fitted to rotary floor buffer was applied to the tiles. More water was applied where required to help lubricate the process and make the pad really work its magic. The slurry generated was extracted using a wet vacuum and the floor inspected. The process was the repeated to ensure all the dirt was removed and the floor was as clean as possible.

Once happy the Victorian tiles were as clean as the could be it was time to give the floor an acid wash which would remove any old mineral deposits including grout smears. We also recommended this for old Victorian floors which do not have a damp-proof membrane installed and can suffer from white efflorescent salt deposits as moisture rises through the tile. To do this Tile Doctor Acid Gel was scrubbed into the to the floor using a 200-grit burnishing pad to make the acid gel work hard. Afterwards we rinsed the floor several times removing the slurry with a wet vacuum. This kept the mess to a minimum and the floor was already looking great.

The floor was left to dry over the weekend, and we would return the following week to carry out the sealing process.

Sealing a Victorian Tiled Hallway Floor

The following Monday we returned to seal the floor. First, we used the moisture meter to test the floor, we needed to ensure it was as dry as possible before sealing it. The client wanted a traditional look, so we opted for Tile Doctor Colour Grow which is a colour enhancing sealer that leaves matt finish. This product is perfect for this type of floor as it is fully breathable allowing moisture to pass through the tile and sealer and not become trapped under the floor where it could spread to the walls and cause rising damp.

Four coats of Colour Grow were applied in total allowing each to dry before applying the next. The sealer works by occupying the pores in the tile thereby protecting the floor and preventing dirt from becoming trapped making it much easier to clean.

I was very happy with the result; the floor was now in great condition and was one of the more dramatic in colour and pattern that I had come across. My customer also felt the same and left the following feedback for me.

“Matt did a professional and thorough job: our Victorian hall tiles really ‘pop’ with colour. Highly recommend. Karen T, Dinnington”

Source: Victorian Tiled Hallway Cleaning and Restoration Service in Dinnington, Rotherham