Replacing Missing Victorian Tiles

This large entrance hall tiled in Victorian black and white floor tiles in London W2 had been quite badly damaged in the past by having a carpet glued and nailed on to it. Many tiles were broken or missing and those missing had been replaced by cement.

Victorian-Tile-Before-Cleaning-in-London.jpg

Cleaning a Victorian Floor

On the first day of this three day job I removed the cement filling and extracted the nails that remained in the floor. I then stabilised the exposed area with a PVA solution before replacing the missing tiles with replica or salvaged ones to match the floor was swept out and vacuumed to remove all loose debris.

On the second day I cleaned the floor, removing the old carpet glue with Tile Doctor “Remove and Go” which was left to dwell onto the tile for a while to allow it to soak into the tile and break down the adhesive; this was then removed with a wet vacuum. The next step was to clean the tiles using Tile Doctor Pro-Clean which was worked in with a black srubbing pad to scrub the cleaning solution into the tile and finish off the cleaning process, again the soiled solution was removed with a wet vacuum. Normally by now the floor would of have been clean however In this case the levels of soaked-in old glue and ground-in dirt from decades of use were such that the floor also required steaming, scraping and wire brushing with a Spid brass wire brush before a final clean with another round of Pro-Clean and a black buffing pad fitted to a Numatic buffing machine. This had the desired affect and the last step was to wash the floor down with clean water to remove any remaining chemicals etc.

Sealing a Victorian Floor Sealing

After leaving the floor to dry overnight I came back the third day to seal the floor using four coats of Tile Doctor Seal and Go which is ideal for Victorian tiled floors as it leaves a low sheen finish whilst providing excellent stain protection.

Victorian-Tile-After-Cleaning-in-London

As you can see from the ‘before’ and ‘after’ photos the results were impressive and the customer described it as, “looking great”.
 
 
Source: Victorian tile restoration in Central London

Victorian Tile Cleaning in Shepperton

Details below of a Victorian tiled floor we did recently in in St Margaret’s, Shepperton. The floor had not been maintained for a while and was in need of a mechanical scrub clean and a new seal, building and renovations have been on-going for some time and so in some areas there was a lot of ground in dust and soil.

Cleaning Victorian Tiles

We set about cleaning the floor using Tile Doctor Pro-Clean which was applied with a mop and left it to dwell on the floor for five minutes in order to give it chance to soak into the tile and get to work on the dirt. The solution was then worked into the floor with the use of a rotary scrubbing machine fitted with a scrubbing pad. The soiled residue was then vacuumed away and the floor was rinsed through, the process was then repeated until we were happy with the overall condition of the tiles.

Twickenham Victorian Floor Before

Sealing Victorian Tiles

Due to moisture being held in the substrate we had to allow seven days for the floor to dry and tests were performed with a damp meter to ensure the floor was ready to accept a sealer. Four coats of Tile Doctor Seal and Go were then applied which is a recommended Sealer for Victorian Tile, offering good stain protection and adding a low sheen to the surface. Sealing the floor also makes cleaning it much easier going forward, it is however a slow process as you have to let each coat dry before applying the next.

Twickenham Victorian Floor After

We can maintain all types of tile, stone and grout servicing the Twickenham and the surrounding areas so please get in touch for a free evaluation of your floor.
 
 
Source: Maintaining Victorian Floor tiles in Middlesex