Repair and Renovation of a Victorian Tiled Hallway in Doncaster

This beautiful Victorian tiled hallway was in desperate need of some TLC. The house had recently changed hands and the new owners of the house were having the entire property renovated. The last part of the renovation plan was to have the Victorian hallway tiles restoring back to their former glory. Floors are always best left until last, especially hallways as last as workmen don’t usually take a lot of care in my experience.

The house was built in the early 1900’s and was situated close to Doncaster town centre a couple of streets away in fact from the famous Doncaster Racecourse which dates to the late 1500’s.

Victorian Hallway Tiles Before Renovation Doncaster

Cleaning/Repairing a Victorian Tiled Hallway Floor

There were a few areas of damage to the floor that would need dealing with first. This is not surprising given the age of the floor which must have seen a lot of comings and goings over the years. Our first task therefore was to repair the damage using replica tiles sourced to be as close a match to the originals as possible. We usually find any slight differences disappear once the floor has been deep cleaned and sealed. Once removing the damaged tile and cleaning the base we use a fast setting adhesive to fix the replacement tiles in place so we can get on with the cleaning as soon as possible.

Victorian Tiled Hallway Floor Repair Doncaster

Once the replacement tiles had set, we unloaded our slow speed rotary floor machine and large wet vacuum which would be used during the cleaning. To start the cleaning the floor was sprayed with Tile Doctor Remove & Go and this was left to dwell on the tiles for twenty minutes. This gives time for the product to break down old floor coatings and grime, this was followed by scrubbing the tiles with a 200-grit diamond pad fitted to the floor machine and assisted with the addition of more water to help lubricate the process. This process generates a lot of slurry as the dirt and old sealers etc are released from the tiles and this is extracted from the surface of the floor using the wet vacuum.

The next step was to give the floor an acid wash using Tile Doctor Acid Gel which is applied to the tiles and left to dwell for fifteen minutes and scrubbed in again with the floor buffer and 200-grit diamond pad. Once done the floor was rinsed with water and then dried using the wet vacuum to extract as much moisture as possible. This last process is designed to counter any alkaline salts that may be present in the floor which may cause efflorescence to appear later. It also removes old mineral deposits and generally get the tiles looking much brighter. Once complete the floor was left to dry off naturally overnight.

Sealing a Victorian Tiled Hallway Floor

I came back the next day to seal the tiles first checking the floor was dry using a moisture meter. Satisfied that the floor was ready for sealing I started to seal the tiles using multiple coats of Tile Doctor Seal and Go Extra which is a fully breathable sealer which is important for old floors like this. Seal and Go Extra also leaves a lovely satin finish which works well on Victorian tiles and brings the floor alive.

Victorian Hallway Tiles After Renovation Doncaster

This was the last step in this properties renovation, and I think you will agree that the floor responded really well to the restoration process and the colours in the tiles are now very vibrant.

 

Source: Victorian Tile Cleaning and Sealing Service in Doncaster, South Yorkshire

Putting new life into an Old Victorian Tiled Floor in Doncaster, South Yorkshire

Our customer in Doncaster had lived in their house for 7 years. The property had lots of lovely period features along with a beautiful patterned Victorian tiled hallway. Since moving in they had not done anything to restore the appearance of the hallway floor, although they were very aware they wanted to preserve the floor but unsure what could be done to fix it and get it back up to scratch.

Victorian Tiled Hallway Before Cleaning Doncaster

Over time the floor had become increasingly ingrained with dirt and very difficult to keep clean, so they decided to do something about it and contacted Tile Doctor. I visited the property, came up with a plan of action, agreed a price and booked the job in for the following week.

Cleaning/Repairing a Victorian Tiled Hallway Floor

First task was to remove any old sealers or waxes that may still be present on the floor. There are several ways to do this but for this job the floor I decided to treat it with Tile Doctor Remove & Go, which was left to dwell for a good ten to fifteen minutes before being agitated with a rotary floor machine fitted with a 400-grit diamond burnishing pad.

Victorian Tiled Hallway During Cleaning Doncaster

Remove and Go is a multi- purpose stripper that breaks down most coatings and sealers. It also has the benefit of drawing out ingrained stains and any heavy grease build up. The resulting slurry was then rinsed off the floor with water and a wet vacuum.

After that the floor was inspected and it was clear more work was required to remove the years of dirt. Given the age of the property I was sure no damp proof membrane would have been installed prior to laying the floor. This can often lead to a build-up of alkaline salts in the floor that might appear as efflorescent white spots as the floor dries after cleaning.

To finish off cleaning the floor and to counter any alkaline salts I gave the tiles a clean with Tile Doctor Oxy-Gel combined with Tile Doctor Acid-Gel. I used the same process as before, allowing the products to soak into the tiles for ten minutes and then scrubbing the hallway floor with the 400-grit diamond burnishing pad fitted to a rotary floor machine. Once again, the solution was rinsed off the floor with water and then extracted with a wet vacuum.
The floor was wiped clean with damp microfibre clothes and left to dry off overnight.

Victorian Tiled Hallway During Cleaning Doncaster

Sealing a Victorian Tiled Hallway Floor

I came back a few days later to allow for the hallway floor to have fully dried out, I also double checked it was fully dry by using a moisture meter. Satisfied that the floor was ready for the sealing process I started to seal the tiles. For this I used five coats of Tile Doctor Colour Grow which is a colour enhancing impregnating sealer that leaves a matt finish and will protect the floor for years to come. This sealer is also fully breathable which makes it ideal for floors such as Victorian tiles where the age of the property means damp can be an issue.

Victorian Tiled Hallway After Cleaning Doncaster

The job was completed, and the floor had been returned to its’ previous vibrant look. The customer was very happy and could see how much easier it would now be to maintain.
The property now looked how you would expect when you opened the front door!

 

Source: Victorian Tile Cleaning and Renovation Service in Doncaster, South Yorkshire