Renovating a Victorian Tiled Hallway Without Water in Cleckheaton, West Yorkshire

I was asked to visit an old house from the Victorian era in Cleckheaton which is part of the West Yorkshire district of Kirklees and only 14 miles from my base in Oxenhope. The owners had bought the house last year and had been renovating it ever since. The last job was to sort out the Victorian tiled hallway that they knew from the previous owners had been covered by carpet for over 50 years.

Leaving the floor restoration until last was a sensible decision as the last thing you need is for a decorator to drip paint over your recently renovated floor. I could see the floor was in good physical condition but had layers of dirt, old sealant and of course paint splashes on it but after doing a test clean I knew that we could bring it back to life and return it to something like its former glory.

Victorian Tiled Hallway Before Renovation Cleckheaton Kirklees

The test clean is an important part of our survey as it gives the customer confidence we know what we’re talking about and it gives me a chance to work out the best way of cleaning the floor, so I can provide a more accurate quotation (see below). The owner of the property was impressed with the results of the test clean and keen to have the full potential of the Victorian tiled floor revealed booked me in to do a full clean and seal.

Deep Cleaning a Very Dirty Victorian Tiled Hallway Floor

Normally, we would clean these floors using our rotary machines and chemicals to break down the layers of dirt but in this instance that was not going to be effective. I worked this out during the test clean where I discovered that the tiles were very porous so that any liquid that was put on the floor was immediately absorbed into it. This meant that any chemicals that I applied to the floor did not have time to work before they were absorbed into the floor. When these floors were originally laid there was no damp-proof membrane laid underneath which leaves them very susceptible to damp issues and salting from efflorescence.

After trying a couple of different methods, I decided that the only way to get this floor clean was to use handheld diamond blocks and a small amount of water to clean the floor in very small sections at a time and then immediately remove the residue before it dried back into the floor. This was obviously very time consuming but did remove the dirt very effectively, it also meant that I wouldn’t exacerbate any efflorescence issues which could happen when excessive amounts of water are used.

Victorian Tiled Hallway During Renovation Cleckheaton Kirklees

Once the whole floor was clean it was given an Acid Wash with Tile Doctor Acid Gel to neutralise any potential salting issues. The gel was then rinsed off with water and extracted using a wet vacuum to remove as much moisture as possible from the floor. The now clean floor was then left to dry off thoroughly, so it would be ready for sealing.

Sealing an Old Victorian Tiled Hallway Floor in

A couple of days later I returned and started by checking the moisture levels in a couple of areas to verify that the tiles were dry enough to be sealed. All was well and so I proceeded to seal the floor with a couple of coats of Tile Doctor Colour Grow which is an impregnating sealer that seeps into the pores of the tile protecting it from within. Colour Grow is also a colour enhancing sealer that improves the natural colours in the tile and most importantly it’s a breathable sealer that will allows any moisture rising through the tile to evaporate. Using a breathable sealer is highly recommended for floors with no damp-proof membrane as moisture can become trapped under the tile which over time can cause damp to rise through the walls and even tiles to become loose.

Victorian Tiled Hallway After Renovation Cleckheaton Kirklees

The Customers were very impressed by the transformation in their floor and hopefully you can see from the photos how much of a difference that has been made to the floor.

 

Source: Victorian Tile Cleaning and Sealing Service in Cleckheaton, West Yorkshire

Soiled Victorian Hallway Tiles Deep Cleaned in Swansea

This is a great example of a classic Victorian Tiled Hallway and shows just how hard wearing and durable these floors are. The floor had been installed at a house in Swansea what must have been well over a hundred years ago and was now very badly soiled however I knew from experience that with the right techniques and products they can be given a new lease of life.

Victorian Tiled hallway floor before cleaning Swansea

We mainly use diamond burnishing pads on original Victorian tiles these days, the alternative is to use cleaning products however that method tends to use a lot of water and can aggravate an issue known as efflorescence whereby salts from the sub floor are carried up through the tile as moisture evaporates leaving white salt stains on the surface of the floor. This is not a problem with modern floors as they are usually have a damp proof membrane installed under the floor which prevents damp.

Deep Cleaning Victorian Hallway Tiles

To restore the appearance of the Victorian tiles I started with the application of a coarse 200-Grit diamond encrusted burnishing pad which cuts through the dirt and removes surface staining. The pad is run over the tiles using water to lubricate and then the floor rinsed afterwards to remove the soil that is generated. The soil is then extracted off the floor with a wet vacuum. This is then followed up with a 400-Grit pad which cleans and restores the surface which is left roughened after the application of the coarse 200-grit pad, again the pad is applied with water and then the flor rinsed afterwards to remove the soiling and the water is extracted using a wet vacuum.

The next step was to give the floor an acid wash using Tile Doctor Acid Gel, the acid neutralises the alkaline mineral salts in the floor and reduces the chance of efflorescence occurring, After being scrubbed into the floor the gel is rinsed off the floor using water which is then quickly extracted with the wet vacuum.

The floor was left to dry off overnight and I came back the next day to apply the sealer.

Sealing Victorian Floor Tiles

Before starting the sealing process it’s important to check the floor is dry first for which I use a hand-help damp tester. I find it’s a good idea to take readings from various parts of the floor before I start a job so I can establish a normal background level for the floor.

All was well so the floor was sealed using a couple of coats of Tile Doctor Colour Grow which is an impregnating sealer that works by occupying the pores in the clay tile thus preventing dirt from becoming ingrained there. This particular sealer also enhances the natural colours in the tile and is fully breathable which is important in these situations where you need moisture to evaporate through the tile and not become trapped underneath where it could work its way into the walls of the house.

Victorian Tiled hallway floor after cleaning Swansea

It’s worth knowing that if you do experience effluence salts which are more likely in the damp winter weather, then they can be mopped off the floor before they harden without any damage to the sealer itself.

 

Source: Victorian Tile Cleaning and Renovation Service in Swansea

Victorian Tiled Hallway Repaired and Restored following Central Heating Installation in North London

The owners of this property in Palmers Green, North London had uncovered an original Victorian hallway floor during renovation work. However, the priority was to have a new central heating system installed so they had to make a decision to allow the heating engineer to rip up part of the floor in order to lay new pipes.

With the floor now missing a large section most customers would agree to have the hole back-filled with concrete and then have lino installed on top, however keen to have the floor restored as an original feature they reached out to Tile Doctor who have a lot of experience in this field.

Our brief was to infill the excavated section and reinstate the floor with new original style Victorian tiles to match the existing ones.

Victorian Tiled Hallway Before Cleaning Palmers Green

Deep Cleaning a Victorian Tiled Hallway

The existing floor had been covered in Carpet which had been secured using carpet gripper fixed to the floor using adhesive, there were also old paint splashes from decorating that would need to be removed. Our first job therefore was to remove the glue and paint by applying a strong dilution of Tile Doctor Remove & Go which is a coatings remover especially designed for use on tile and stone. The product was applied, left to dwell for about twenty minutes and then scrubbed into the floor, this softened the paint and glue which could then be carefully scrapped off tile tiles.

The next step was to give the floor a deep clean with a strong solution of Tile Doctor Pro-Clean to strip off what remained of old sealers and extract any ground-in dirt from the pores of the tile. Naturally this work had to be done in two sections due to the missing tiled section and then once complete each part of the floor was given a good rinse and the slurry extracted using a wet vacuum.

The floor was then inspected and a second clean was carried out to remove any stubborn staining or residue followed by a steam clean.

Rebuilding a Victorian Tiled Hallway

Following the two stages of cleaning we checked the existing floor pattern and prepared the hallway by levelling the floor in preparation for inlaying the new tiles which were chosen to offer the best possible match. We were able to source reclaimed tiles that would match up to the pattern and during this phase of the restoration work we carried out any loose tile and grout repairs and re-grouted the newly laid tiles.

Sealing Victorian Hallway Tiles

With the original tiles clean and the hallway rebuilt we left the floor to dry off fully overnight.

On our return we first checked the tiled were dry and that the grout in the new section was clear of any grout smears from the tiling work. Happy with the condition of the hallway we first applied a coat of Tile Doctor Colour Grow which is an impregnating sealer that will protect the tiles from within by occupying the pores within the tile, it also enhanced the colours in the clay tile.

Once the first coat of sealer was dry it was followed by five coats of Tile Doctor Seal & Go which adds further layers of protection and adds a nice subtle satin finish that works really well on Victorian tiles.

Victorian Tiled Hallway After Cleaning Palmers Green

The work went very well, and the sealer consolidated the new and old tiled sections to form a seamless floor.
 
 
Source: Victorian Tile Cleaning and Restoration Service in Palmers Green, London

Investing in Property with a Period Victorian Floor Restoration in Lancashire

A property investor contacted Tile Doctor to see if we could help renovate a property that was to be sold in few weeks’ time. To get maximum value from the investment she wanted to preserve the character and period features of the house including the Victorian Tiled Hallway floor, which as you can see from the photograph below was in need a bit of TLC!.

Victorian tiled floors and other period features have become very popular in recent years and are often discovered under hallway carpets covered in years of dirt. Fortunately, they are very resilient and with the right techniques and products can be restored back to their former glory.

Victorian Tiles Before Renovation Burnley

On our initial visit I conducted a survey of the floor to check its condition and work out the most suitable products and methods to employ to restore it. One of the main concerns we have with these old floors is damp as damp-proof membranes were not invented until relatively recently. I have a damp meter to check for this and it did indicate high moisture levels which isn’t really an issue for cleaning the floor but would restrict our choice of sealer to those which are fully breathable and allow moisture to rise-up through the tile. We agreed a price and schedule with the customer and within two weeks we were able to start the work.

Cleaning an Original Victorian Tiled Hallway Floor

The floor was in quite a state, made worse I suspect by recent restoration work by other contractors who unfortunately didn’t take as much care with the floor as the could have done.

After protecting the skirting boards and carpets with film work got underway starting by applying a strong dilution of Tile Doctor Remove and Go to the floor to strip away old sealers and other coatings. This product also helps to break down the paint stains on the surface of the tile, though I also used a handheld scraper, as well as a rotary machine fitted with a black scrubbing pad, to speed up the process. The resultant slurry was rinsed off the floor with water and extracted using a wet vacuum.

With the floor clean of coatings, the next step was to deep clean the tiles with a medium dilution of Tile Doctor Pro-Clean which is an effective Tile and Grout cleaning product that deeply cleans away ingrained stains. Again, we used a black scrubbing pad fitted to a rotary machine to make the job easier. Corners were tough to tackle with a machine, so we had to do them by hand.
The floor was given a final rinse to remove any soil and trace of cleaning product and the wet vacuum was used a final time to extract as much moisture out of the floor as possible. Upon finishing the cleaning, we left the floor for a few days, so it could dry out fully.

Dealing with Efflorescence

When we came back to seal the floor we noticed problems with white salt deposits coming to the surface of the tile a problem known as efflorescence. I had suspected this might become an issue but there was no indication of it happening before so was not overly concerned at the time. However, it meant I could not seal the floor as planned until the efflorescence had been dealt with. Fortunately salts like these can be treated and to resolve the problem I gave the floor a wipe with a solution of Tile Doctor Acid Gel which is a blend of phosphoric and hydrochloric acids in a gel form, formulated to remove grout haze (grout smears) and treat efflorescence. Once this was done the floor was given a light rinse and dried again.

Sealing an Original Victorian Tiled Hallway Floor

I left the floor to dry again for a few more days and on my return, I was pleased to see the problem had not resurfaced and I was able to complete the restoration with the application of a sealer.

To seal the tiles, I used a couple of coats of Tile Doctor Colour Grow, which is a penetrating sealer designed to soak into the pores of the clay thus preventing dirt from becoming ingrained whilst additionally enhancing the colours in the tile. The sealer really deepened the colours in the tile bringing them to life and with Colour Grow being fully breathable there shouldn’t be any issues with damp becoming trapped under the tile and causing issues later.

The customer was delighted with the results (see feedback below) and the work we did should more than pay for itself when the house goes on the market.

“Thoroughly impressed with Kamila, she was so lovely, professional and thorough! Our tiles look amazing and I was especially happy with how quick she sorted that floor out from the first email I sent. Janice M., Burnley”

Victorian Tiled After Renovation Burnley

 
 
Source: Victorian Tile Cleaning and Renovation Service in South Lancashire

Restoring an Old Victorian Hallway Floor in Monmouth

This beautiful black & white Victorian tiled hallway was recently discovered hidden under carpet at a house near Monmouth. As well as the years of grime that had become ingrained in the tile, the carpet had been secured with carpet grippers which had been fixed on top of the tiles and the owner was keen to recruit my help in its restoration.

It’s a lovely drive up through the Wye Valley from my base in Caldicot to the town of Monmouth which has a long history that goes back to the Roman times. In fact it’s famous for its “Monnow Bridge” which dates back to medieval times and is the only remaining stone gated bridge of its type left in Britain. Needles to say it has a strong mixture of architecture with many old houses built during Victorian times.

Victorian Floor Before Renovation in Monmouth

Cleaning an Original Victorian Tiled Hallway Floor

The first step in cleaning the floor was to prepare it for cleaning by carefully removing the old carpet grippers and adhesive deposits using a handheld scraper. This was followed by creating a mixture of two powerful cleaning products namely Tile Doctor Remove and Go and NanoTech HBU remover. Remove and Go is a coatings remover designed to strip off old sealers whilst NanoTech HBU is a powerful Heavy Build-Up Remover that uses tiny abrasive particles to clean up tile and stone.

The floor was smothered in the cleaning solution and it was allowed to soak into the tile for about twenty minutes before scrubbing it in. It was not an exceptionally large hallway so a lot of hand scrubbing was required to get the floor as clean as possible. The cleaning solution was rinsed off with water and then extracted using a wet vacuum or wet vac as my colleagues often refer to it.

To finish off the cleaning process I scrubbed a dilution of Tile Doctor Pro-Clean into the grout lines to get them as clean as possible and then gave the floor a final rinse. I need the floor to be dry before sealing so using the wet vac I extracted as much moisture from the floor as possible.

Sealing an Original Victorian Tiled Hallway Floor

I left the floor to dry completely overnight and returned the next day to finish the floor off with a few coats of sealer. On my arrival I started by taking a few reading with a damp meter to ensure the floor was ready to be sealed. Fortunately by efforts with the Wet Vac the night before had paid off and it confirmed the tiles were dry and ready to be sealed.

To do this, I used multiple coats of Tile Doctor Seal and Go which works really well on Victorian Tiles and adds a nice low sheen that brings them up nicely. Naturally the sealer not only improves the way they look it also makes them much easier to clean and will protect them against ingrained dirt and staining.

Victorian Floor After Renovation in Monmouth

I think you will agree this old floor has been transformed and now has a new lease of life.
 
 
Source: Victorian Tile Cleaning and Renovation Service in Monmouthshire

Restoring an Edwardian Tiled Hallway Hidden Under Carpet

Edwardian-style tiled floors are very much of a likeness with Victorian-style tiled floors, both typically being made of encaustic cement and styled in painted in geometric patterns. The main difference, of course, is that Edwardian tiles are a main feature of Edwardian-era houses (1901-1910), while Victorian tiles are found in slightly older properties.

As with many Victorian tiled floors, we’ve found that Edwardian tiled floors have commonly been hidden away for many years under carpet or some other form of covering. These hallway Edwardian tiles, at a property in Chippenham, had been covered by carpet for 30 years. Upon removing the carpet, we could see why – the hallway was covered in paint splashes, decades’ worth of dirt and, of course, adhesive stains from the underlay.

Edwardian Tiled Hallway Covered in Carpet and Before Restoration in Chippenham Edwardian Tiled Hallway Covered in Carpet and Before Restoration in Chippenham

My task was to restore the hallway floor back to its peak condition, when it was first installed over a century ago.

Edwardian Tiled Hallway UnCovered Before Restoration in Chippenham Edwardian Tiled Hallway UnCovered Before Restoration in Chippenham

Cleaning an Original Edwardian Tiled Hallway Floor

The first step of the restoration was to ensure the walls surrounding the hallway were protected. I did this by applying a protective film around the edges of the room. Next, I removed all the old carpet grippers and adhesive deposits manually using a handheld scraper.

Edwardian Tiled Hallway Prepared for Restoration in Chippenham

Tile Doctor Remove and Go was then applied to the floor to strip away any old sealant, which certainly by now was no longer effectual. This product also helped to break down the paint stains on the surface of the floor, though I also used a handheld scraper, as well as a rotary machine fitted with a black scrubbing pad, to speed up the process of removing both the sealant and the paint.

Edwardian Tiled Hallway During Restoration in Chippenham

To complete the cleaning process, I applied Tile Doctor Acid Gel, which is a blend of phosphoric and hydrochloric acids in a gel form, formulated to remove grout haze (grout smears) and treat efflorescence which is the formation of white salts on the surface of the tile.

Sealing an Original Edwardian Tiled Hallway Floor

I left the floor to dry completely overnight after installing air movers to assist with the process. These older properties do not typically have damp-proof membrane installed, which makes damp issues a real possibility. Upon returning to the property the following day, I ran some damp tests, and thankfully the tiles proved dry and ready to be resealed.

To do this, I used one coat of Tile Doctor Ultra-Seal, which is a penetrating sealer designed for maximum stain protection. I then also added four coats of Tile Doctor Seal and Go to provide the customer with the low-sheen, highly quality finish he desired.

He was so impressed with the outcome that he left the following glowing review on the Tile Doctor feedback system:

“Tile Doctor did an excellent job, starting from a very dirty and paint covered surface. The hallway floor now looks fantastic, just like it was a century ago. I’m pleased to recommend Cambridge Tile Doctor.”

Edwardian Tiled Hallway After Sealing in Chippenham

 
 
Source: Edwardian Floor Tile Cleaning and Renovation Service in Cambridgeshire