Restoring Old Victorian Hallway Tiles

Finedon is a small civil parish in Northamptonshire with a big history. At the time the Domesday Book was complete in the late 11th century, the town was, in fact, a large royal manor held by the wife of Edward the Confessor.

In subsequent centuries the town has experienced a rich history and many of the current houses were built during the Victorian period (1837-1901). It came as little surprise to me, then, to get a call from a customer in the town who had recently found an original Victorian tiled floor underneath the carpet in her house.

The tiles were well over a century old. They had been covered by carpet for several years at least, and once unearthed they are clearly covered in paint and other debris from renovation work that had been carried out. Naturally, the customer was keen to restore the appearance of the tiles and so she called me, the local Tile Doctor, to get the job done.

Cleaning an Original Victorian Tiled Floor

You can see from the photos above that the floor was in quite a state – it took a whole day to clean. The floor area was only around eight metres squared, but it took two litres of Tile Doctor Remove and Go and three litres of Tile Doctor Pro-Clean to get it clean. Remove and Go is a very strong stripper that will just about shift any type of dirt or stain, while Tile Doctor Pro-Clean is a reliable high alkaline cleaner both products are designed for use on natural stone.

Once all the dirt, stains and paint splashes were removed, I washed down the floor with fresh water to neutralise the chemicals. I then installed some equipment to assist the drying process overnight, allowing the tiles to be sealed the next day.

There were also some cracks and missing grout that I replaced, along with some several loose tiles that I refitted.

Sealing an Original Victorian Tiled Floor

I returned to the property the next day to seal the floor. To do this I used two coats of Tile Doctor Colour Grow, which provides robust protection and the quality matte finish the customer had requested.

As the name suggests, it also enhances the natural colours in the tiles, restoring character to this original feature. For a more traditional look, one litre of sealer was sufficient.

Looking at the photos, you can see the huge improvement made over two days of work. One hundred years of wear and tear alleviated in 48 hours! The customer was thrilled.
 
 
Source: Victorian Tile Cleaning and Restoration Service in Northamptonshire