Edwardian Hallway Floor Repaired and Restored in Finchley, London

After having their hallway carpeted for several years the owner of this Edwardian property in Finchley, North London decided they would like to restore their original tiled hallway floor. They asked me to visit and help lift the carpet to see whether restoring would be feasible. They knew from before that a few areas of tiles were damaged and did not know if replacements could be sourced.

Edwardian Tiled Hallway Before Restoration Finchley

As requested, I went over to have a look at the newly revealed floor and make some recommendations. After carefully removing the hallway carpet we found the floor to be very dirty but importantly intact with only a few sections of loose or missing tiles. It would certainly be possible to restore it and given the length of the hallway I was confident it would look impressive when finished and be a great addition to the property.

We discussed the process and after confirming that sourcing matching reclaimed tiles as replacements was possible, we agreed a price and arranged a date to carry out the work.

Cleaning/Repairing a Edwardian Tiled Hallway Floor

The carpet had left quite a lot of residue on the tiles as well as adhesive from the carpet glue, so our first task was to get the Edwardian tiles clean. We carried out a detailed clean over the whole floor using Tile Doctor Remove & Go to treat the adhesive followed by a strong dilution of Tile Doctor Pro Clean to remove all the dirt and old sealers. The floor was rinsed off afterwards and the soils extracted using a wet vacuum.

The next job was to begin the repairs starting with a complete inspection of the floor to lift the loose, broken and fractured tiles. The good ones were individually cleaned ready for re use. This left about 150-200 broken missing tiles that needed to be replaced. We had a number of reclaimed tiles and a selection of new style Victorian tiles we could cut to fit.

Edwardian Tiled Hallway During Restoration Finchley Edwardian Tiled Hallway During Restoration Finchley

Prior to relaying we prepared the base with new cement and levelled the floor to give a good surface. The tiles were carefully laid to the quick set adhesive, once this was dry the floor was re grouted. Once all the tiles were re-grouted the floor was cleaned of any excess grout with Tile Doctor Grout Clean-Up which is great for removing grout smears.

Edwardian Tiled Hallway During Restoration Finchley

Sealing an Edwardian Tiled Hallway Floor

The floor was then sealed with a coat of Tile Doctor Colour Grow which is a colour enhancing sealer that impregnates the tile and protects it from within. The floor was left to dry overnight, and we returned the next day to apply five coats of Tile Doctor Seal & Go to give a natural satin finish, leaving each coat to dry prior to applying the next.

Edwardian Tiled Hallway After Restoration Finchley

The whole project took three and a half days to complete.

The client was very happy with the result, in fact it was even better than they had expected. For aftercare I recommended that they use Tile Doctor Neutral Tile Cleaner to keep the floor clean as it is pH balanced and will ensure the seal is not undermined which can happen with other household cleaners.

Edwardian Tiled Hallway After Restoration Finchley

 

Source: Edwardian Tile Cleaning, Repair and Restoration Service in Finchley, North London

Dirty Victorian Tiled Hallway Renovated in Abergavenny, Monmouthshire

This lovely Victorian tiled floor was located in the hallway of a beautiful house in Abergavenny which is an old Market Town that dates back to Roman times on the outskirts of the Brecon Beacons national park.

Victorian Tiled Hallway Before Cleaning Abergavenny

It has been sometime since it was last given a thorough clean and seal and was now in need of some TLC to give it a new lease of life and have a chance to take centre stage again. The floor was in excellent condition, but the old sealer had worn off in the high traffic areas and dirt had now penetrated the pores of the clay tiles making it difficult to maintain effectively.

Victorian Tiled Hallway Before Cleaning Abergavenny

Repairing and Cleaning Dirty Victorian Tiles

To get the tile and grout clean and remove what remained of the old sealer I applied a 50/50 mixture of Tile Doctor Pro-Clean combined with Remove and Go. This was further diluted with water and applied to the floor for ten minutes, so it could soak into the tile and get to work breaking down the old sealers and dirt. The solution was then worked into the tile and grout using a 17” black scrubbing pad fitted to a rotary buffer machine running on slow speed to reduce splashing. This process released the years of grime and dirt build up from the floor and a wet vacuum was used to extract the soil.

I gave the floor a rinse with water which was then removed using the wet vacuum and the floor inspected to ensure it was clean and that what was let of the old sealer was now removed. There were a few stubborn areas than needed attention, so the treatment was repeated until I was satisfied.

The floor was then given a thorough rinse to remove any trace of cleaning products and then dried with the wet vacuum to remove as much moisture as possible. It’s not wise to apply sealer when the floor is still damp so once I was done cleaning I left for the day so that is could dry off fully overnight.

Sealing Victorian Tiles

My first task upon returning to the property the next day was to check for any dampness. If you neglect to remove all excess moisture from the surface of the tiles before sealing it is more than likely going to cloud the sealer, rendering it less effective I’m protecting the stone against ingrained dirt and stains.

Once satisfied that the floor was completely dry I was able to complete the renovation by applying several coats of Tile Doctor Seal and Go which is a topical sealant that works really well on Victorian tiles and leaves a lovely satin finish that brings out the colours.

Victorian Tiled Hallway After Cleaning Abergavenny

My customer was very pleased with the outcome and left the following comment on the Tile Doctor feedback system.

Paul was very professional and did a fantastic job with our Victorian tiled hallway. It looks so much better. I would definitely recommend Tile doctor to anyone needing cleaning or restoring of tiles.
Sarah T, Abergavenny

Victorian Tiled Hallway After Cleaning Abergavenny

Source: Victorian Tile Cleaning and Sealing Service in Abergavenny, Monmouthshire

Classic Edwardian Tiled Hallway Floor Restored in Muswell Hill, London

It must seem to he reader of this site that the only we get in North London relates to Victorian and Edwardian tiled floors. They are certainly popular, and we do get our fair share, but I can assure we also work on all types of tile, stone and grout however at the moment there appears to be a huge demand for our services in restoring Victorian and Edwardian tiled floors.

This post which comes from a property in the London suburb of Muswell Hill which is well known for Victorian and Edwardian houses. The owners had decided to improve the look of their hallway and uncovered an original Edwardian tiled floor after pulling up the carpet. Realising it was an original feature of their period property they decided to get it cleaned, repaired and restored back to its rightful splendour.

Edwardian Hallway Before Restoration Muswell Hill Edwardian Hallway Before Restoration Muswell Hill

Deep Cleaning an Edwardian Tiled Floor

Our first task was to protect the area surrounding the tiles from splashing by applying a protective polythene tape to the thresholds and door fronts etc. We then started preparing the floor for cleaning by removing the glue that was used to hold the carpet gripper to the tiles. A sharp blade was used to carefully scrape the adhesive off the tile and then the area was spot treated using a strong dilution of Tile Doctor Remove & Go which was left to soak into the tile for ten minutes before being scrubbed by hand.

With the adhesive removed the whole floor was given a thorough clean using a strong dilution of Tile Doctor Pro Clean. The cleaning solution was left to soak in for ten minutes and then they were scrubbed with floor pads fitted to a rotary buffer machine and then by hand with stiff brushes. The floor was then rinsed, and steam cleaned with the soiled extracted off the floor using a wet vacuum.

We managed to take a photo as seen below showing the floor half way through the cleaning stages.

Edwardian Hallway During Cleaning Muswell Hill

Repairing a Victorian Tiled Hallway Floor

Whist carrying out the repairs to inside the front door we uncovered a distressed surface underneath the tiles, probably from all the foot traffic walking over it for so many years which required some much-needed attention. After carefully taking out the required number of tiles and setting those aside we had to lay a new covering of cement and insert stainless steel mesh plates to level the floor.

Edwardian Hallway Before Restoration Muswell Hill Edwardian Hallway After Cleaning and Repair Muswell Hill

After the installation of the tiles, the floor was re grouted and thoroughly cleaned and left to dry off overnight.

Sealing Edwardian Style Tiles

We returned the next day to seal the floor, first checking to ensure the tiles had dried out overnight. To start the sealing, we applied a single coat of Tile Doctor Colour Grow with leaves a matt finish and left it to dry. Colour Grow is an impregnating sealer that provides stain protection whilst enriching the colour of the tiles in the process.

Edwardian Hallway After Sealing Muswell Hill

Once the first coat was dry it was followed by the application of six coats of Tile Doctor Seal & Go which adds further layers of protection but leaves a satin finish that gives a rich, natural appearance and works really well on Victorian and Edwardian tiles.

Edwardian Hallway After Sealing Muswell Hill

 
 
Source: Edwardian Tile Cleaning and Restoration Service in Muswell Hill, London

Repair and Restoration of a Victorian Tiled Hallway in Darlaston near Walsall

The photographs below are from a house in Darlaston near Walsall which had recently changed hands. The new owner was quite taken by the existing Victorian tiled hallway floor which unfortunately had not been maintained very well by the previous owner, undeterred by its appearance he contacted Tile Doctor to see if it could be restored.

Darlaston grew rapidly in the 19th century around the nut, bolt and gun lock manufacturing and coal mining industries with many houses being built so it’s very possible that this floor was laid when the house was built over a hundred years ago

When I visited to quote for the work it was apparent that the floor which was suffering from many broken tiles and a high percentage of loose tiles. With the customer happy for me to do the work I set about sourcing replacement tiles that were a good match for the broken ones which would need replacing.

Victorian Tiled Hallway Before Restoration Darlaston Victorian Tiled Hallway Before Restoration Darlaston

Victorian tiles are still popular, so I was confident I could find new replacements or originals from one of the many salvage companies.

Victorian Tiled Hallway Before Restoration Darlaston

Repairing an Original Victorian Tiled Hallway Floor

Replacement tiles were sourced, and I went about removing the broken tiles and setting the replacements. Whilst working on these I also inspected the floor thoroughly for loose tiles and re-laid them.

Victorian Tiled Hallway During Repair Darlaston

There was also a doorway which had cement laid down where tiles may once have been, and the customer requested that tiles were laid to match the other existing doorways. To break up the concrete I used an SDS drill with chisel attachment and then rebuilt the base with cement to bring it level with the rest of the floor.

Victorian Tiled Hallway During Repair Darlaston

The tiles were cut to match the pattern in the other doorways and set in place.

Victorian Tiled Hallway During Repair Darlaston Victorian Tiled Hallway During Repair Darlaston

After the tiles had set I grouted them in along with other areas that needed re-grouting. Repairs took two days in total.

Deep Cleaning an Original Victorian Tiled Hallway Floor

The next step was to give the whole tiled floor a deep clean; normally I would opt for a chemical cleaning process at this stage however with the floor being so old it was unlikely to have a damp proof membrane and I was concerned about using too much water which would take a long time to dry out. I therefore opted for scrubbing the floor with a 200-grit diamond burnishing pad fitted to a weighted rotary buffing machine and lubricated with a little water.

Victorian Tiled Hallway During Cleaning Darlaston Victorian Tiled Hallway During Cleaning Darlaston

The water soon turned to a slurry as the ingrained dirt and old sealers were removed from the tiles. It’s tricky to get into the edges and corners with circular pads so once that was done the edges were finished with handheld diamond blocks. The floor was then rinsed off and the soil extracted with a wet vacuum before being covered over and allowed to dry for a couple of days.

Sealing Original Victorian Tiles

When I returned to the property the dust sheets were removed and the floor vacuumed to remove surface dust and dirt. Once that was done I started the process of sealing the tiles with Tile Doctor Seal and Go which adds a subtle sheen to the Victorian tiles that really brings the floor alive. Six coats were required to fully seal and protect the floor.

Victorian Tiled Hallway After Restoration Darlaston Victorian Tiled Hallway After Restoration Darlaston

The customer was delighted with the results and I left them with a bottle of Neutral Tile Cleaner for use in cleaning the floor going forward. They also booked me in for 12 months’ time for a maintenance visit, so I can reapply a couple of coats of seal to keep the floor topped up and looking it’s best.

Victorian Tiled Hallway After Restoration Darlaston

 
 
Source: Full Restoration of a Period Victorian Hallway Floor in the West Midlands

Old Victorian Tiled Hallway Discovered Under Carpet Renovated in Tooting

We were asked by the customer in Tooting, if we could restore this Victorian tiled hallway floor that they had found underneath a carpet while they were refurbishing their property. Interestingly he had already had a quote from another company, but they were unable to identify what type of tile it was. Old floors like these are not for the in-experienced and if you look closely at my website you will see I have published over 60 detailed accounts of tile cleaning and restorations since 2012.

Victorian Tiled Hallway Before Restoration Tooting Victorian Tiled Hallway Before Restoration Tooting

I could see there was a lovely Victorian Tiled floor hiding underneath the paint spots and plaster dust and carried out a test patch to show him what the floor would look like when it was clean. I also showed him pictures of similar floors that we have restored over the years and was able to show the finishes you can achieve from different sealers. Convinced I was the chap for the job he booked me in there and then.

Cleaning a Heavily Soiled Victorian Tiled Floor

Returning on the agreed date we started the cleaning process by pre-wetting the floor with water. This was followed by the application of a strong dilution of Tile Doctor Remove and Go which was left to soak in for approximately ten minutes. This product is designed for the safe removal of old coating such as sealers from Tile, Stone and Grout and I knew it would be ideal for the task. The solution was then scrubbed into the Victorian tile and gout using a rotary machine fitted with a black stripping pad. The scrubbing process released a lot of the stains and dirt from the floor which were then extracted with a wet vacuum. The process was then repeated until all the sections were treated.

The floor was then rinsed with water and the resultant residue extracted using a wet vacuum before treating the tiles to an Acid Wash to neutralise any alkaline salts and remove mineral deposits and old grout smears. This was done by applying Tile Doctor Acid Gel for around fifteen minutes and then removing it with a final rinse.

Cleaning the hallway took up most of the day and I needed the tiles to be dry before the next step of applying a sealer, so after discussing progress with the owner I left for the day and gave the floor three days to dry out.

Sealing a Victorian Tiled Hallway

On our return I first checked the floor with a damp meter to make sure it had dried out thoroughly. All was well, so we proceeded to seal the tiles using Tile Doctor Colour Grow which is an impregnating sealer that leaves a matt finish and soaks into the pores of the tile protecting it from within and enhancing its appearance in the process.

Victorian Tiled Hallway After Restoration Tooting Victorian Tiled Hallway After Restoration Tooting

Four coats of sealer were needed and as you can see by the final pictures the hallway now looks fantastic and needless to say the customer was over the moon with the final results.

Victorian Tiled Hallway After Restoration Tooting

 
 
Source: Victorian Tile Cleaning and Sealing Service in South London

Victorian Tessellated Tiled Hallway Restored in Bounds Green

Bounds Green in North London has more than its fair share of Victorian terraced houses packed with desirable original features. When the owners of this house pulled up their hallway carpet they were excited to discover a beautiful and original black and white Tessellated tiled floor.

Victorian Hallway Before Restoration and Repair Bounds Green Lifting Carpet Victorian Hallway Before Restoration and Repair Bounds Green

Tessellated tiled floors became fashionable from the 1860s and usually featured striking geometric patterns. By the end of the century they had become an essential feature in the most ordinary Victorian terraced houses from Dover to Aberdeen. They fell out of fashion in the 1960s and 70s and were usually covered over with carpet or linoleum, but period house owners today understand their value and are restoring them back their former glory. A well-restored tessellated tiled floor not only looks incredibly attractive but is durable and hard wearing. They were originally laid by highly skilled tillers and most have already survived 100 years of family wear and tear. With the right care they will probably be good for another 100 years.

Restoring a Victorian Tessellated Tiled Floor

The first thing we did was cut away the rest of the carpet to expose the whole hallway. The floor looked in a relatively stable condition, but it was clear the floor needed a deep clean and some minor repairs.

Victorian Hallway Before Restoration and Repair Bounds Green Victorian Hallway During Restoration and Repair Bounds Green

We started off by cleaning off each individual tile with Tile Doctor Remove and Go, a multi-purpose stripper that also draws out ingrained stains and removes old sealers and coatings; this took away all the glue and dirt from the carpet. We then applied Tile Doctor Nanotech HBU which is specially designed to penetrate below tough stains, dissolve and lift them out. We left that for twenty minutes for maximum effect before lightly scrubbing. Each tile was then individually scrapped with polypropylene pads.

The next step was to remove the resultant soil by rinsing with water and extracting with a wet vacuum. We steamed cleaned each tile and carried out a second clean with Tile Doctor Pro-Clean which is a strong cleaner and degreaser for heavily soiled and neglected tile, stone and grout that has been neglected or subjected to heavy use.

By now the floor was looking pretty good. The beautiful black and white design of the floor was once again in evidence after decades of being hidden under carpet. There were just a few more steps to complete the job and restore this floor to its original glory. We carried out the minor repairs needed, carefully re-grouted the very fine gaps between the tiles and left the floor overnight for the grout to thoroughly dry.

Sealing a Victorian Tessellated Tiled Hallway Floor

The next day we sealed the tiles with five coats of Tile Doctor Seal and Go to give a beautiful and natural low-sheen satin finish. This specially formulated solution also provides a stain resistant surface seal and being water based it doesn’t leave a smell as it dries.

Victorian Hallway After Restoration and Repair Bounds Green

We managed to complete the whole job in just under two days with two of our skilfully-trained technicians. Our customer was delighted with the outcome and left the following message for us on the Tile Doctor feedback system:

“The team worked hard at what seemed a fiddly job and we are very pleased with the outcome. I would recommend.” Natalie G, Bounds Green, London”

Victorian Hallway After Restoration and Repair Bounds Green

 
 
Source: Tessellated Tile Cleaning and Sealing Service in North London

Relaying 450 Edwardian Hallway Tiles in a Crouch-End

Pictures below of an original Edwardian Tiled Hallway at a house in Crouch End, North London. Victorian and Edwardian properties are quite common in the area which actually dates to the 13th Century and is often used in the filming of East Enders.

We were called in to look at restoring the floor back to its former glory and when inspecting and surveying the floor we found large sections of tiles that were loose and three doorway thresholds that required rebuilding and re-tiling. If you have been following our website posts, you will know this is something we specialise in, so we were more than happy to help.

Edwardian Hallway Threshold Before Restoration Crouch End

Restoring an Edwardian Tiled Floor

Before cleaning the floor our first task was to remove the loose, damaged, cracked and broken tiles. These were set aside and those that could be re-used were cleaned prior to re-laying. The remaining tiles were then cleaned using Tile Doctor Remove & Go to remove the old waxes and seals.

Edwardian Hallway Floor Before Restoration Crouch End

Over the course of three days we worked in small areas of about a metre square at a time. After cleaning the tiles were then fully rinsed and steam cleaned and left to dry. In the meantime, we began the repairs to the thresholds and central part of the floor.

After the installation of the new and reclaimed tiles the floor was re grouted using Mapei grey grout and thoroughly cleaned and left to dry overnight.

Sealing Edwardian Style Tiles

We returned the next day to seal the floor, first checking to ensure the tiles had dried out overnight. To start the sealing we applied a single coat of Tile Doctor Colour Grow and left it to dry. Colour Grow is an impregnating sealer that provides stain protection whilst enriching the colour of the tiles in the process.

Edwardian Hallway Threshold During Sealing Crouch End

Once the first coat was dry it was followed by the application of six coats of Tile Doctor Seal & Go which is a protective Satin Seal that gives a rich, natural appearance and works really well on Victorian and Edwardian tiles.

Edwardian Hallway Threshold After Restoration Crouch End

In total the work took four days to complete and we relayed around 450 tiles in the process. Before leaving we advised our customer on how best to maintain the appearance and increase longevity of the sealer.

Edwardian Hallway Floor After Restoration Crouch End

 
 
Source: Edwardian Tile Cleaning and Maintenance Service in Crouch End, North London

Restorative Cleaning of an Edwardian Tiled Hallway in Nottingham

The pictures below detail the restorative clean and seal of a Black & White Edwardian Geometric Tiled Hallway at a residence in West Bridgford near Nottingham. The tiles had previously been covered in carpet trapping years of dirt and soiling into the pores of the tile which were also stained with paint spots and traces of carpet adhesive.

These floors are amazing to look at, and it’s a shame that due to changing fashion trends over the decades, that many became covered with other inappropriate floor coverings. At least in the case the carpet was fixed with glue, I have worked on others before were tiles were smashed in order to secure gripper rods.

Edwardian Black and White Geometric Hall Floor Before Restorative Clean and Seal

I could see a lot of work would be needed to bring it back, however having restored countless number of Victorian and Edwardian tiled floors before I was confident we could achieve a good result and was pleased to get the go ahead to complete the work.

Restoring an Edwardian Tiled Hallway Floor

The first part of the cleaning process was to apply a strong dilution of Tile Doctor Remove & Go coatings remover allowing it to dwell and soak into the tiles and break down the adhesive and paint stains. The solution was then agitated using a black scrubbing pad to help break down the historic-soiling and soften the glue and paint so they could be carefully scraped off. This process generated a lot of soil which was rinsed off and extracted using a wet vacuum.

Old tile installations such as these were never designed to be covered as damp proof membranes were unheard of at the time. Instead the tilers of the day used a breathable lime screed to allow moisture to pass freely from the sub floor. This combined with coal fires of the day, and air movement kept a controlled temperature to ensure moisture didn’t build-up.

Covering these floors stops them from breathing and moisture inevitably can build-up and potentially lead to white salts to be deposited on the surface of the tile as it dries. To avoid this problem, which is known as Efflorescence, the salts need to be counteracted with the application of an acid. To this end my next step was to liberally apply Tile Doctor Acid Gel to the tiles and leave it to dwell for time. This process dissolves the efflorescence salts and also removes any other unwanted deposits such as grout smears from the tile.

The last phase of the cleaning process was to remove the Acid Gel and then rinse with water again to remove any trace of product. The floor was then dried as much as possible with a wet vacuum to remove moisture and then left for a few days to fully dry out.

Sealing an Edwardian Tiled Floor

On our return the floor was checked for dampness using a damp meter in a number of different places. All was well so the floor was then sealed in two stages, starting with an application of Tile Doctor Colour Grow which is an impregnating sealer that improves colour. Once the sealer had dried it was followed with a number of coats of Tile Doctor Seal and Go Extra which works really well on Victorian and Edwardian tiles adding a lovely subtle shine. Both these products are fully breathable which is vitally important where efflorescence is a concern. Otherwise, moisture will build up and causing staining and direct moisture into the supporting walls.

Edwardian Black and White Geometric Hall Floor After Restorative Clean and Seal

Once our Restorative Cleaning & Sealing process is complete you should avoid the use of steam cleaners and strong cleaning products as they can prematurely erode the sealer. Ideally we recommend you maintain the floor with Tile Doctors Neutral Tile Cleaning Solution which is pH neutral once it has been correctly diluted.
 
 
Source: Edwardian Tile Cleaning and Sealing Service in West Bridgford, Nottinghamshire

Victorian Tiled Hallway Restoration in North London

This lovely Victorian Tiled Hallway was discovered by a couple during the renovation of their home in Woodford Green which is a suburb of Woodford in North East London. The tiles were covered by a hallway carpet and much of it was obscured by concrete floor leveller. Fortunately just enough of the tile was exposed to give an indication of the Black and White Victorian floor underneath.

After initial investigation and discussion on what was possible, we were invited to quote to restore the floor which I’m pleased to say was accepted. The following pictures show an indication of the process we followed to restore the hallway to its former Victorian glory.

Cleaning Victorian Hallway Tiles

The first step was to remove the concrete floor levelling compound which was done very carefully using small hand tools, detail blades and scrapers. This took a lot of work as we did not want to damage the tiles underneath. You can get a feeling for this from the photographs below where we slowly remove the concrete layer over the floor to reveal the Victorian floor underneath.

Removing Concrete Leveller From Victorian Floor Tiles in Woodford Green Removing Concrete Leveller From Victorian Floor Tiles in Woodford Green

Once the Victorian tiles were all uncovered and the cement had been removed we got a good idea of the condition of the tiles and began a deep clean restorative process. The process began by giving the floor an acid wash with Tile Doctor Grout Clean-Up which was left to dwell on the tile for ten minutes before being scrubbed in to release remaining smears of concrete and grout residue on the tiles.

The resultant soil was then removed with a wet vacuum and the floor then cleaned with Tile Doctor Pro-Clean using a similar technique of leaving it to dwell and then scrubbing it in.

Cleaning Victorian Hallway Floor Tiles in Woodford Green

Once cleaned the soiled cleaning product was removed with a wet vacuum and the floor give an thorough rinse with fresh water which was followed by a steam clean to finalised the process.

Cleaning Victorian Hallway Floor Tiles in Woodford Green

With the floor now deep cleaned we moved on to addressing the three door thresholds which needed to be rebuilt to fix loose and replace broken tiles.

Victorian Hallway Floor Tile Threshold After Cleaning in Woodford Green

Sealing Victorian Hallway Tiles

The tiles were left to dry and set overnight and we returned later to seal them with an initial coat of Tile Doctor Colour Grow, an impregnating seal as a primer before re-grouting. Colour Grow is an impregnator that seeps into the pores of the tile protecting it from within and also enhancing the colours in the tile.

Victorian Hallway Floor Tiles Regrouting in Woodford Green

Once the sealer had dried we moved on to grouting those areas which were repaired the previous day with a matching grout colour and then this was left to set

When the grout was set it was time to finish off the sealing this time using five applications of Tile Doctor Seal & Go to provide a natural sheen finish.

Victorian Tiled Hallway Floor After Full Restoration in Woodford Green

As you can see from the picture, the floor has been fully restored to its original condition and with the correct maintenance; it should last for years to come.
 
 
Source: Victorian Tile Cleaning and Restoration Service in London

Old Victorian Hallway Covered in Carpet Glue Fully Restored in Brighton

The 19th century was a pivotal period for the Brighton and Hove area of East Sussex. Many of the major attractions were built during the Victorian era, including two of the major piers. Over time, Brighton became not just a very popular destination for day trippers, but also for home makers. Lots of Victorian-style houses were built, complete with Victorian-style tiled floors.

Modern homeowners are increasingly uncovering these original Victorian tiles after decades of being hidden under carpet overlay. Contrary to popular belief, it is very much possible to restore these tiles back to peak condition despite suffering from damage, dirt and staining.

Victorian Tiled Hallway Floor Before Restoration Hove

I recently a house in Brighton to prove just that. The customer’s Victorian tiled hallway floor had been covered by many carpets over the past few decades and so there were many thick glue deposits, along with a heavy build-up of dirt and staining.

Victorian Tiled Hallway Floor Before Restoration Hove

Cleaning an Original Victorian Tiled Hallway

After protecting the woodwork with tape, I set about cleaning the Victorian tiles using a combination of products. One of these was Tile Doctor NanoTech HBU (HBU = Heavy Build-Up Remove), a powerful cleaner which uses nano-sized cleaning particles to penetrate deep into the tile to lift out and dissolve ingrained dirt and stains. I mixed the NanoTech HBU together 50:50 with Tile Doctor Pro-Clean, a reliable alkaline-based cleaner. This cleaning mixture was applied to the hallway floor and then covered with a plastic sheet for a few hours before being scrubbed into the tiles thoroughly with a lot of elbow grease and a specialised scrubbing pad.

Victorian Tiled Hallway Floor During Restoration Hove

A lot of the glue deposits were stubborn and would not respond to the chemical cleaning, so I needed to carefully scrape these off by hand. Once the majority of the glue had been removed I applied a set of diamond-encrusted burnishing pads to remove the top layer to resurface the floor and bring back a lot of the definition in the tile.

Victorian Tiled Hallway Floor During Restoration Hove

Sealing an Original Victorian Tiled Hallway

After completing the cleaning process, I left the floor to dry completely. Giving the tiles enough time to dry is important, especially in older properties which won’t have a damp-proof membrane installed. Even a small amount of excess moisture can cloud the sealer and damage its performance.

Once I was satisfied with the moisture level, I proceeded to seal the tiles using numerous coats of Tile Doctor Seal and Go which is a water based sealer that doesn’t leave a smell as it dries and as well as adding a layer of protection to the tiles give an appealing low-sheen finish.

Victorian Tiled Hallway Floor After Restoration Hove

The client, being of French nationality, said she was “sur la lune” (over the moon) with the result! Look at the photos below to see the transformation – I must say I was quite pleased myself!

Victorian Tiled Hallway Floor After Restoration Hove

 
 
Source: Victorian Cleaning and Renovation Service in East Sussex

Renovating a Victorian Tiled Hallway in South Wales

Many property owners who are lucky enough to have an original Victorian tiled floor in their homes face the same conundrum: can an old and potentially very damaged floor be salvaged and restored to peak condition or should I replace it?

Some people would instinctively tell you that the answer is no – even trained professionals! In fact, a leading tile restoration company (which shall remain unnamed) based in Cardiff told a recent customer of mine that her original Victorian tiled floor, dating back to 1905, was beyond repair. The company recommended that she not waste any money on having it restored and instead that she should have it ripped up and replaced.

Victorian Tiled Hallway in Cardiff Before Restoration

It was in a bad state, however replacing the floor would incur a significant cost and the original characteristics of the period floor would be lost. The customer was feeling rather deflated and was left undecided on what to do. Fortunately after browsing the web for a solution, she came across Tile Doctor and I was asked to pop over and take a look.

I visited the customer at her home and removed parts of her hallway carpet to get a better look at the Victorian tiles beneath. The floor was certainly in a very poor state, there were many old paint splash marks covering the tiles and the surface of the floor was deeply darkened after many years’ worth of wear and tear. In my opinion however, it was still salvageable, and the customer was happy to see what could be done.

Cleaning an Original Victorian Tiled Floor

A week before I was due to start the restoration, I asked the customer to remove the foam-backed carpet to let the floor breathe a bit.

Before beginning the work, I ran a few damp tests and the floor proved surprisingly dry considering how old it is and the very probable lack of a damp proof membrane. I started by manually scraping as much of the old paint staining off the stone as possible and cleared other debris from the surface.

Knowing that clay based Victorian tiles like these easily soak up paint splashes, I knew it would take a thorough clean to remove them completely. I firstly soaked the floor with water and left it to dry slightly before mixing a concoction of Tile Doctor NanoTech HBU, Tile Doctor Pro-Clean, and Tile Doctor Remove and Go.

NanoTech HBU is a particularly powerful cleaner which uses nano-sized particles to penetrate the pores of the stone, while Pro-Clean is an alkaline-based cleaner that tackles heavy soil build-up. Remove and Go is a multi-purpose product which both cleans and strips away any old sealer.

I left this mixture to dwell on the floor for around half an hour, scrubbed it in firstly using a black scrubbing pad fitted to a rotary machine and then a wire wool pad. I followed by rinsing the products off with water and extracted up the excess with a wet vacuum machine.

This technique was repeated until I was satisfied with the condition of the floor.

Sealing an Original Victorian Tiled Floor

After leaving the floor to dry off completely overnight, I returned to the property the next day to carry out the sealing process. I applied seven coats of Tile Doctor Seal and Go, which not only adds a protective covering to the tile, but also enhances its appearance.

The customer was absolutely thrilled with the results of the restoration, especially considering that she was told the floor was ruined by a leading company and not worth saving.

Victorian Tiled Hallway in Cardiff After Restoration

I think you will agree that its always worth trying to restore a period floor and my customer deserves praise for sticking to their guns.
 
 
Source: Victorian Tile Cleaning and Maintenance Service in South Wales

Repairing and Restoring an Edwardian Tiled Hallway in North London

This customer from Islington in North London had an Edwardian Black and White tiled hallway in need of repair and restoring.

Edwardian Hallway Floor Before Tile Cleaning Islington

To restore the lustre of the Edwardian floor tiles the floor would need what was left of the old sealer stripped off, tiles deep cleaned, the replacing of missing and broken tiles and finally applying an impregnating colour restoring products and a protective sealer. You will full details of how this was done below.

Edwardian Hallway Floor Before Tile Cleaning Islington

Cleaning Edwardian Style Tiles

Before starting we covered the skirting, doors and threshold areas with protective tape. Then to remove what was left of the old sealer and clean the floor the area was left to soak in a strong solution of Tile Doctor Remove and Go for about ten minutes. It was then scrubbed into the tile using a slow speed orbital floor machine fitted with a black scrubbing pad and also hand held brushes to get into the corners and other tricky areas.

The now soiled cleaning solution did a good job removing the dirt and old sealer and was rinsed away using water and then extracted with a wet vacuum. The tile and grout was inspected and the process repeated where required before giving the floor a final rinse to remove any trace of cleaning product. It was getting late at this point so the floor was left to dry off thoroughly overnight.

Sealing Edwardian Style Tiles

On our return we first carried out a number of restorative tile repairs using matching Edwardian reclaimed tile replacements primarily to the door thresholds and skirting board edges. Before grouting we applied a single coat of Tile Doctor Colour Grow sealer to the whole floor as this would make any excess grout easier to remove. Colour Grow is also a breathable sealer that impregnates into the pores of the tile protecting it from within and also enhancing the colours in the tile.

We had to leave the floor for another day primarily to allow the grout to dry before returning the next day to complete the sealing process this time using six coats of Tile Doctor Seal and Go which adds a lovely sheen and works really well on Edwardian floor tiles.

Edwardian Hallway Floor After Tile Cleaning Islington

As you can see from the picture, the floor has been restored to its original condition and with the correct maintenance; it should last for years to come.

Edwardian Hallway Floor After Tile Cleaning Islington

 
 
Source: Edwardian Tile Cleaning and Maintenance Service in North London

Large Victorian Hallway Restored in Gloucestershire

Victorian tiles are very hard-wearing and historically a popular choice for heavy traffic areas such as hallways. Still popular today they are nonetheless like most tiles and can become ingrained with dirt over time.
This particular floor, located in a property in the old market town of Tewkesbury is a good example of a floor that was in good physical condition, but heavily ingrained with dirt due to a lack of regular maintenance. At a loss for how to remedy the situation by themselves, the property owner asked me to pay a visit to restore the tiles back to their best possible condition.

Large Victorian Hallway Tewkesbury Before Cleaning

Cleaning a Dirty Victorian Tiled Hallway Floor

In this particular scenario, I opted to mix and apply a solution of different cleaning products from our professional range, each serving a different purpose. These products were Tile Doctor Pro Clean, Tile Doctor Remove and Go, and Tile Doctor NanoTech HBU. Remove and Go serves the purpose of stripping away any old sealer on the tiles, while Pro Clean is an alkaline cleaner that reliably removes dirt and staining. NanoTech HBU is a particularly powerful cleaner which utilises nano-sized particles to penetrate deep into the pores of the stone, get underneath difficult stains and lift them out.

I spread this potent solution across the length and width of the tiled hallway and left it to soak for approximately 10 minutes, before using a black scrubbing pad fitted to my buffing machine to give the tiles a deep scrub. Next, I rinsed the soiled solution away and neutralised the chemicals with plain water, before extracting any residue using a wet vacuum. I repeated the cleaning process several times to achieve the best results possible, and I also employed the aid of a steam cleaner to spot clean any particularly stubborn marks.

Sealing a Dirty Victorian Tiled Hallway Floor

Cleaning the floor took two days in total. At the end of the second day, I gave the floor a thorough and final rinse before leaving it to dry completely overnight. The next day, I returned to the property to seal the floor after checking the floor was dry. Ensuring before sealing that the floor is completely dry is crucial – even the smallest quantity of moisture remaining can potentially cloud the sealer and damage its performance.

My choice of sealer was Tile Doctor Colour Grow, an impregnating sealer that penetrates and fills the pores of the tile to prevent trapped dirt and makes regular cleaning much easier. Colour Grow is a great choice of sealer for Victorian tiles because it really enhances the colourful patterns which are characteristic of this type of tile.
My customer was very impressed with the service and remarked on the huge improvement to the appearance of the floor. You can see this for yourself – just take a look at the before and after photos!

Large Victorian Hallway Tewkesbury After Clean and Seal

 
 
Source: Victorian Tile and Grout Cleaning Service in Gloucestershire

Restoring Victorian Hallway Tiles after Building Works

These photographs are of a Victorian tiled hallway at a house in Hampton, Middlesex which is South West suburb of London. The tiles had suffered during the completion of extensive building works and as you can see from the picture below, the tiles were looking dull and had lost their vibrancy.

Victorian Tiled Hallway Before Cleaning Hampton

On top of that the floor was heavily soiled with plaster dust as well as general soiling from wear and it had not been cleaned or sealed for nearly eight years. Victorian tiles are very hard wearing however and I knew I could put new life into the floor by giving them a good deep clean and re-seal.

Cleaning Victorian Hallway Tiles

To get the tiles clean and remove unwanted coatings we applied a 50/50 combination of Tile Doctor Pro-Clean and Tile Doctor Remove and Go.
This combination of products is effective at breaking down old sealers and coatings as well as cleaning the soil away from the tile.
The products were left to soak in for ten minutes before using a heavy-duty machine fitted with a scrubbing pad to work the solution into the pores of the tile. This did the trick and the soil and products were then flushed away using our special flushing tool which fires a jet of water onto the tile whilst extracting it at the same time with a vacuum (so no mess!)

Sealing Victorian Tiles

After allowing the tiles to dry overnight with some heating on, the floor was ready the next morning to accept a fresh sealer. Our customer wanted to have a sheen finish so we opted for Tile Doctor Seal and Go which works really well on Victorian tiles. Seven coats were applied to the floor before it was completely sealed and protected.

Victorian Tiled Hallway After Cleaning Hampton

As well as improving the appearance of the tiles new sealer will also make cleaning much easier for the customer.
 
 
Source: Victorian Tile and Grout Cleaning Service in Middlesex

Cleaning a Victorian Tiled Cafe floor

At Tile Doctor, we don’t just offer our tile cleaning and sealing services to residential properties, such as flats and houses we also cover tile installations in commercial properties, such as hotels and restaurants as well as

In fact, commercial properties tend to experience much higher daily foot traffic than residential floors resulting in much more strain on the sealer. This of course wears down the sealer more quickly and once the sealer had worn away the tiles are vulnerable to dirt becoming ingrained which makes the floor difficult to clean.

This Cafe in Chertsey is very popular with staff from the nearby hospital, as well as residents in the local area. Naturally, the cafe gets very busy and the Victorian tiled floor had experienced heavy traffic and was marked by footprints from hundreds of hungry customers.

Cafe Floor Chertsey Before Cleaning

I was called in to help the cafe owner restore this original feature back to its best possible condition and then seal again to protect it.

Cleaning a Heavily Soiled Victorian Tiled Floor

Once the cafe staff had left for the evening, I moved the tables aside to avoid damaging them and laid down a strong dilution of Tile Doctor Pro Clean across the floor. This is our reliable alkaline cleaner which is designed to loosen the dirt on tiles and grout.

As the dirt was deeply ingrained in the stone, I scrubbed the floor using an abrasive 200 grit pad fitted to on rotary buffer. Within seconds the pad had worked its magic and I had a trail of filthy water to suck up using a wet vacuum machine.

Once the majority of the floor had been cleaned, I took to my knees to closely inspect the stone for dirt. Any particularly stubborn areas were tackled using a wire brush in combination with Tile Doctor Remove and Go, which is a heavy-duty cleaner/coatings remover which works well on removing any old sealers, paints and adhesives.

Sealing a Victorian Tiled Floor

Once the floor was clean, I washed and neutralised the surface with plain water. While I was packing up for the day I also installed my air-blower to aid the drying process overnight.

Two nights later I returned to the cafe to seal the tiles with Tile Doctor Colour Grow. Colour Grow is a colour enhancing sealer that impregnates into the pores of the tile to bring out the natural colours whilst adding a durable matte finish that acts as a barrier to dirt.

Cafe Floor Chertsey After Cleaning

As you can see from the photo above, the result was fantastic. In fact, the customer loved her newly restored floor so much that she even told me to help myself to any cake of choice, I do like a bonus!
 
 
Source: Victorian Tile and Grout Cleaning Service in Surrey

Bomb Damaged Victorian Floor Rebuilt in Coventry

The Warwickshire team recently visited a customer in Earlsdon, a village near Coventry, who wanted a Victorian tiled floor rebuilt before being cleaned and sealed. Sometimes our work goes well beyond simple cleaning and sealing services, especially when tiles are damaged, broken or completely missing however we have done several rebuilds before and always welcome a new challenge.

Victorian Tiled Floor Before Rebuild Earlsdon

Upon closer inspection, I could see that up to 70% of the tiles were damaged in some way, and the screed was cracked from movement which given how old the house was may have been caused by the Blitz of Coventry during World War II, more than 70 years prior.

Repairing and Rebuilding a Damaged Victorian Tiled Floor

To begin the restoration, we had to remove all the tiles, determining in the process what could be salvaged and discarding any that were beyond repair. I happened to have a set of replacement Victorian tiles reclaimed from the floor of a local house and thankfully they matched perfectly.

After stripping the floor of tiles the holes and cracks had to be filled and a new screed was laid to ensure the base would be level and stable.

Victorian Tiled Floor Before Rebuild Earlsdon Victorian Tiled Floor Before Rebuild Earlsdon

Once the screed had set we started fixing the tiles to the floor using a mixture of the original and reclaimed tiles.

Victorian Tiled Floor Before Rebuild Earlsdon Victorian Tiled Floor During Rebuild Earlsdon

Once laid the tiles were grouted and by the end of the fifth day the floor was rebuilt.

Victorian Tiled Floor During Rebuild Earlsdon Victorian Tiled Floor During Rebuild Earlsdon

Cleaning and Sealing a Victorian Tiled Floor

The next task was to give the new floor a deep clean which we did using Tile Doctor Remove and Go. This product is a heavy-duty stripper and coatings remover designed to tackle heavy soil build-up and remove old sealers in the process. The product was left to soak into the tiles and then scrubbed in using a black buffing pad fitted to a rotary machine. The soiled cleaning solution was rinsed off with water and extracted using a wet vacuum.

The floor was then given a thorough acid wash using Tile Doctor Acid Gel, which is a blend of phosphoric and hydrochloric acids in an easy-to-use gel form. This helped to remove grout smears, efflorescence and mineral salts.

Once clean, the floor was rinsed thoroughly with water to neutralise the chemicals, before being speed dried. Finally, we sealed the tiles using four coats of Tile Doctor Seal and Go Extra. This sealer is a special acrylic based formula which allows moisture vapour transmission and is ideal for old floors which do not have a damp proof membrane installed.

Victorian Tiled Floor After Rebuild Earlsdon

We were really pleased with the outcome and it felt rewarding to salvage this fantastic Victorian floor and give it a new lease on life after suffering significant damage. The customer was overjoyed with the fully restored original feature.

Victorian Tiled Floor After Rebuild Earlsdon

 
 
Source: Victorian Tile and Cleaning and Sealing Service in Warwickshire

Victorian Hallway Tiles Repaired and Restored in Northampton

The photographs below are from a Victorian tiled hallway floor at a house in Northampton where I was called in by the owner to inspect the floor for restoration, deep cleaning and re-setting of all loose tiles covering around 3sq metres.

Victorian Tiled Hallway Floor Northampton Before Repair and Cleaning Victorian Tiled Hallway Floor Northampton Before Showing Loose Tiles

Cleaning Victorian Tiles

The initial process was to vacuum and remove any loose debris before applying Tile Doctor Oxy-Gel to the entire area. Oxy-Gel is a strong alkaline based gel cleaner/stripper which is safe to use on tile and grout and being gel based it’s very easy to control. The gel was left to get to work on the dirt for ten minutes before being scrubbed into the tile with a black stripping pad fixed to a rotary floor machine. The resultant slurry and dirt was then rinsed with water and removed using a wet vacuum. The floor now free of dirt and old sealers was now prepared ready for repairs and re-grouting.

Grouting Victorian Tiles

The next step was to remove small sections of loose tiles and then re-fixing and re-grouting as required. We took care to replace tiles into their original position to ensure they sat together correctly. Once the section was replaced I removed the tiles in the next section and repeated this process until the 3sq metres of loose tiles were all reinstalled.

Victorian Tiled Hallway Floor Northampton During Repair Victorian Tiled Hallway Floor Northampton During Repair

I allowed the grout to dry for a few hours before polishing off excess grout with a cloth and removing difficult grout smears with a weak solution of Tile Doctor Grout Clean-Up. The floor was then rinsed again using water to remove any trace of products and then dried using the wet vacuum.

Victorian Tiled Hallway Floor Northampton After Repair Closeup Victorian Tiled Hallway Floor Northampton After Repair Closeup

Sealing Victorian Tiles

I returned a few days later to ensure the floor was completely dry as dampness can be issue with this type of tile, I then vacuumed the floor and gave it a light clean with Tile Doctor Neutral Cleaner to make sure it was spotless before sealing.

Once the floor had dried I took damp readings and when satisfied the floor was dry again I applied three coats of Tile Doctor Colour Grow Sealant for a light sheen finish and to enhance the natural colour of the floor. Colour grow is a penetrating sealer that protects from within by soaking into the pores of the tile stopping dirt from becoming ingrained there, it also enhances colour.

Victorian Tiled Hallway Floor Northampton After Repair and Cleaning Victorian Tiled Hallway Floor Northampton After Repair and Cleaning

 
 
Source: Victorian Tile Repair and Restoration Service in Northamptonshire

Victorian Tile Repair in South Cumbria

Ulverston is one of several historic market towns in Cumbria which has some excellent views of Morecambe Bay and the Southern Lake District. It is also home to some lovely old properties, including one that I visited recently to provide some repairs, cleaning and sealing for a Victorian tiled floor.

Although the floor was in good condition overall, the tiles were starting to loosen in some areas because the grout had come adrift and needed to be replaced.In fact, several tiles had broken as a result of this and so they would need to replaced too.

Victorian Hallway Before Cleaning in Ulverston Victorian Hallway Before Cleaning in Ulverston

Cleaning a Victorian Tiled Floor

As I’ve mentioned, the floor had been well maintained, but I opted in any case to give the tiles a routine clean with our reliable high alkaline product, Tile Doctor Pro Clean, scrubbed in using a pad fitted to a rotary machine. This helped to remove any debris and dirt left over on the tiles.

After the initial clean I proceeded to replace the broken tiles with matching reproduction Victorian tiles, as well as the grout in the areas where the tiles had loosened.

Sealing a Victorian Tiled Floor

After finishing the cleaning and repair processes, it was time to seal the floor with a combination of sealers.

To do this I firstly applied one coat of Tile Doctor Colour Grow, which is an impregnating, colour intensifying sealer. We find that by applying a base coat of Colour Grow we can lock out the damp that can come through from underneath as many old floors don’t have damp proof membranes fitted, unlike many modern floors. What’s more, acrylic polymer sealers such as Tile Doctor Seal and Go do not respond well to a damp environment.

Once the Colour Grow had been applied and had dried completely, I applied five thin coats of Seal and Go to add further protection and a quality sheen finish. This sealer is also fully breathable and allows Vapour Moisture Transmission (VMT).

Victorian Hallway After Cleaning and Sealing in Ulverston Victorian Hallway After Cleaning and Sealing in Ulverston

The finish was exactly what the customer was looking for and they were very happy with the overall restoration of the floor. Another satisfied customer!
 
 
Source: Victorian Cleaning & Repair Service in South Cumbria

Restoring Old Victorian Hallway Tiles

Finedon is a small civil parish in Northamptonshire with a big history. At the time the Domesday Book was complete in the late 11th century, the town was, in fact, a large royal manor held by the wife of Edward the Confessor.

In subsequent centuries the town has experienced a rich history and many of the current houses were built during the Victorian period (1837-1901). It came as little surprise to me, then, to get a call from a customer in the town who had recently found an original Victorian tiled floor underneath the carpet in her house.

Victorian Tiled Floor Before Cleaning in Finedon

The tiles were well over a century old. They had been covered by carpet for several years at least, and once unearthed they are clearly covered in paint and other debris from renovation work that had been carried out. Naturally, the customer was keen to restore the appearance of the tiles and so she called me, the local Tile Doctor, to get the job done.

Cleaning an Original Victorian Tiled Floor

You can see from the photos above that the floor was in quite a state – it took a whole day to clean. The floor area was only around eight metres squared, but it took two litres of Tile Doctor Remove and Go and three litres of Tile Doctor Pro-Clean to get it clean. Remove and Go is a very strong stripper that will just about shift any type of dirt or stain, while Tile Doctor Pro-Clean is a reliable high alkaline cleaner both products are designed for use on natural stone.

Once all the dirt, stains and paint splashes were removed, I washed down the floor with fresh water to neutralise the chemicals. I then installed some equipment to assist the drying process overnight, allowing the tiles to be sealed the next day.

There were also some cracks and missing grout that I replaced, along with some several loose tiles that I refitted.

Victorian Tiled Floor During Cleaning in Finedon

Sealing an Original Victorian Tiled Floor

I returned to the property the next day to seal the floor. To do this I used two coats of Tile Doctor Colour Grow, which provides robust protection and the quality matte finish the customer had requested.

As the name suggests, it also enhances the natural colours in the tiles, restoring character to this original feature. For a more traditional look, one litre of sealer was sufficient.

Victorian Tiled Floor After Cleaning in Finedon

Looking at the photos, you can see the huge improvement made over two days of work. One hundred years of wear and tear alleviated in 48 hours! The customer was thrilled.
 
 
Source: Victorian Tile Cleaning and Restoration Service in Northamptonshire

Deep Cleaning a Victorian Tiled Garage Floor

We don’t get many requests to clean garage floors but this particular floor was quite old and tiled in black and red Victorian tiles. Many would have just washed it down with a hose pipe however this garage in the city of Lancaster housed a classic British built AC sports car which doesn’t like getting dust in its Carburettor’s and as a result the owner was keen to have the floor restored.

Lancaster Garage AC Sports Car

You can see from the photograph below the floor was in quite a state and as such the whole floor needed a thorough deep clean to remove the ingrained dirt and grease and then sealing to protect it.

Lancaster Garage Victorian Tiled Floor Before Cleaning

Cleaning a Victorian Tiled Garage Floor

With the exception of moving the vehicle little preparation was required and we soon got on with the job starting with the application of a strong dilution of Tile Doctor Pro-clean which is a great product for deep cleaning tile and grout. The solution was left to soak into the tile for ten or so minutes before being worked in with a buffing machine fitted with a black buffing pad. This soon lifted the dirt from the tile turning the cleaning solution into a dark fluid that was rinsed from the floor with water and extracted using a wet vacuum.

With old floors like these where no damp proof course has been installed it’s not unusual to get white salt marks appearing which leave a white bloom on the surface of the tile. This problem is known as efflorescence however it can be treated early on by giving the floor a wash with a strong acid which removes the salts. So the next step was to apply a Tile Doctor Acid Gel which being in gel form makes it easy to control once it’s on the floor, naturally acids are not good in general for any floor so it was not left on the tiles for too long before being extracted.

Last step was to give the floor a good rinse with water to remove any remaining trace of cleaning products before sealing, once this was done we used the wet vacuum to suck up as much moisture from the floor as possible.

Because of the water that was used, we had to let the floor dry out for several days before the sealer could be applied, this is especially relevant in the winter months when the water tables are high and thus a longer time is required for drying. Modern floors have a damp proof membrane so drying out can take twelve hours or less.

Sealing a Victorian Tiled Garage Floor

When we returned to seal the floor we first checked the floor was suitably dry by checking for dampness using a damp meter. The readings were good so several coats of a breathable sealer called Tile Doctor Colour Grow which has a matt finish was applied. I should mention that Colour Grow has good VMT (Vapour Moisture Transmission) properties that will ensure any trapped moisture can rise up through the tile and sealer, it also lifts the colours of the clay and gives its a deeper hue, in fact its one of our most popular sealers for these tiles. Having good VMT properties also means that is , Also if efflorescence do come back, the sealer allows the substance to breathe through and you can just wash off the crystals with a wetted mop.

Lancaster Garage Victorian Tiled Floor After Cleaning

Last photo is of the car being parked in the garage by the owner, happy in the knowledge his prized possession is now living in a clean environment.

Lancaster Garage Victorian Tiled Floor After Cleaning

 
 
Source: Victorian Tile Cleaning and Restoration Service in Lancashire

Removing Carpet Glue From An Old Victorian Tiled Hallway

This customer from Bedford, the county town of one of England’s smallest counties Bedfordshire, called me out because they have bought a house and, upon lifting the glued down carpet, had discovered a beautiful Victorian tiled floor. They decided to call me in to see if this original feature could be restored to its former glory having already tried household products to remove the glue and clean the tiles with limited success.

We often find customers who discover old tiles under carpet or linoleum struggle with the standard cleaning products available in supermarket which are only designed for everyday cleaning. The products Tile Doctor sells are far stronger; naturally however to achieve the best results it also helps if you have the right equipment, knowledge and experience and that where we come in.

Victorian Tiled Floor Before Cleaning Bedford

I popped round to take a look at the floor and having tackled quite a few of these restorations before was confident we could restore the floor so a quote was given and the work was booked in for the next week.

Cleaning an Original Victorian Tiled Floor

My first course of action was to vacuum the floor to remove any loose debris. This gave me a better picture of the condition of the floor overall, and so I could assess how best to proceed. I opted for our tried and trusted method of applying a diluted solution of Tile Doctor Pro-Clean, which is a very reliable high alkaline cleaner suitable for all types of natural stone and tile. The solution was applied with a pump-up sprayer and left to dwell for 20 minutes to seep into the pores of the tile.

Victorian Tiled Floor During Cleaning Bedford

Next, I worked the solution into the tiles using a black scrubbing pad fitted to a rotary machine and hand brushes. The resulting cleaning slurry was then rinsed off – and I found that this had removed most of the glue and surface dirt. There were a few stubborn deposits of glue remaining, but I was able to remove them by using hand brushes and scrapers in combination with Tile Doctor Remove and Go, which is as its name suggest can remove most things including old sealers, epoxy grout haze, urethane coatings, synthetic finishes, adhesives and event paint.

Even after this there were still some patches of glue, so I decided to spray the whole floor with Remove and Go and worked it into the stubborn areas with brushes. I left it to dwell for 15 minutes and then rinsed the floor with a wet pick-up extraction machine. This did the job and the floor was left fresh and clean, ready to be sealed once it had dried.

Sealing an Original Victorian Tiled Floor

The floor was left to dry for several days, which is typically necessary for old tiled floors that don’t have a damp proof membrane installed. The customer wanted the floor to look traditional and therefore requested a matt finish. This was achieved by applying two coats of Tile Doctor Colour Grow, which is also breathable thereby allowing any damp to evaporate as gases through the sealer, without affecting the finish.

Victorian Tiled Floor After Cleaning Bedford

As I previously mentioned, floors of this age can sometimes have damp issues, so this sealer is ideal for these older floors. Colour Grow is an impregnating sealer, meaning it penetrates the pores of the stone to fill them and prevent trapped dirt. It also intensifies the colours in the tiles to really bring them to life.

Victorian Tiled Floor After Cleaning Bedford

The customer was shocked and amazed by the great results as she thought nothing could be done to restore such an old floor. Before leaving the property, I gave her some maintenance instructions to help her keep the floor looking its best in the future. Another satisfied customer!

Source: Victorian Tile Renovation and Restoration Service in Bedfordshire

Neglected Victorian Hallway Tiles Restored in Gloucester

If you’ve even undertaken a property renovation, you’ll know that building works can take a very heavy toll on your floors if not properly protected. Not too long ago I was called to a house in Gloucester to see what could be done to restore the appearance of the tiles after the Victorian tiled hallway had been left in a sorry state following renovation work.

Victorian Tiled Hallway Before Cleaning and Repair in Gloucester

Upon arriving at the property, I also discovered that there was a row of tiles missing under one doorway. These would need to be replaced before any cleaning could take place. The renovation work had left very dirty and riddled with minerals salts and old grout smears.

Victorian Tiled Hallway Before Cleaning in Gloucester

If you have never been Gloucester it’s well worth a visit, dating back to the roman times it is in fact the country’s most inland port boasting some fantastic architecture include the historic docks and many period buildings.

Cleaning a Dirty Victorian Tiled Floor

Fortunately, I was quickly able to source matching replacements for the missing tiles to not disturb the original character of the floor. I took it upon myself to install these, fixing them in place and then grouting them.

While the grout on the new tiles was drying, I began the cleaning process using a strong solution of Tile Doctor Pro-Clean. This is a high alkaline cleaner which we use reliably on most types of natural stone, including Victorian, Quarry, Slate, and Sandstone. The product was mixed with a small amount of water, and the solution was worked into the tiles using a black scrubbing pad fitted to a heavy weight rotary machine. This dealt with most of the thick dirt and staining that had been left over by the builders.

The soiled cleaning solution was then rinsed away with water and extracted using a wet vacuum. After the first stage of cleaning, I washed the floor down with Tile Doctor Acid Gel, which is a blend of phosphoric and hydrochloric acid in gel form designed to remove any mineral salts and old grout smears.

Sealing a Victorian Tiled Floor

Once the cleaning process had been completed, I left the floor to dry overnight. Typically, it’s good to give a tiled floor at least 24 hours to dry in order to ensure no moisture was left over, because even the slightest quantity of moisture can cloud the sealer and damage its performance.

Victorian Tiled Hallway After Cleaning and Repair in Gloucester

Once satisfied that the floor was completely dry I applied one coat of Tile Doctor Colour Grow, which is an impregnating sealer designed to enhance the natural colours in the stone. I then waited an hour this sealer to cure before applying four coats of Tile Doctor Seal and Go which added the satin finish the customer had asked for.

Victorian Tiled Hallway After Cleaning and Repair in Gloucester

The combination of sealers will provide the protection the floor needs and the customer will find it much easier to keep it clean in the future. The result was great and the customer was very happy indeed.
 
 
Source: Victorian Tile Renovation and Restoration Service in Gloucestershire

Victorian Tiles Found Under Hallway Carpet Refurbished in Bedford

When you discover an old Victorian tiled floor underneath carpet, the first question that will probably pop into your mind is: can it be restored?

The answer, in the majority of cases, is yes. In fact, Tile Doctor has completed hundreds of Victorian tiled floor restorations. Victorian tiles have a timeless quality about them and are still popular for residential use even in the twenty first century.

What you can usually expect upon lifting your carpet is for the tiles to be covered in carpet adhesives and grippers, as was the case with this particular example of a Victorian Tiles hallway floor at a property in Bedford. Sometimes you might also find paint splashes or other staining left over from decoration work. And, of course, the tiles will be dirty and in much need of a deep clean. These issues spoil the original appearance of the tiles, but with the right methods and products, a complete restoration can be achieved quickly and cost-effectively.

Victorian tiled floor Before Cleaning Bedford

My first task upon arriving at the proper was to carry out a site survey to address the condition of the tiles, before running a quick test clean on a small area of the floor. The result was good and so I was confident that I could achieve a high-quality restoration for the client.

Victorian tiled floor Before Cleaning Bedford

Cleaning Original Victorian Tiles

A quote was issued and accepted, and the work was booked in at a date that was convenient for the customer.

Returning to the property, my first course of action was to mix a strong dilution of Tile Doctor Pro Clean, which is a powerful alkaline cleaner safe to use on natural stone, with hot water. This cleaning solution was sprayed along all edges of the floor loosen the glue securing the carpet grippers. I then successfully removed the adhesive carefully using handheld tools to avoid damaging any tiles.

Victorian tiled floor Before Cleaning Bedford

Once this was done, I applied Tile Doctor Remove and Go, scrubbing it into the tiles with a rotary machine. This product is designed to remove heavy soiling, paint splashes and old waxes and sealers. The soiled solution was then extracted using a wet vacuum and stubborn areas re-treated until I was satisfied the floor was clean.

The entire floor was then given a thorough rinse with water to remove any trace of cleaning products and extracted using a wet vax machine.

Sealing Original Victorian Tiles

The floor was allowed to dry for several days before I was able to return to seal the tiles. It’s always important to leave significant time for the floor to dry because any moisture left over can impact the performance of the sealer.

The choice of sealer was Tile Doctor Seal and Go Extra, which provides robust protection against dirt and stains, with a light sheen finish. I chose this sealer not only because the customer wanted a light sheen finish, but also because this particular sealer is fully breathable. Dampness can sometimes be an issue with old Victorian and Quarry tiles which were installed before damp proof membranes became standard.

Victorian tiled floor After Cleaning Bedford Victorian tiled floor After Cleaning Bedford

The transformation achieved within the space of a week was quite incredible and the colours in the tile have really come through.
Another satisfied customer!

Victorian tiled floor After Cleaning Bedford

 
 
Source: Victorian Tile Renovation and Restoration Service in Bedfordshire

Old Victorian Hallway Tiles Refurbished in Cheshire

Victorian tiles are a product of the gothic revival that occurred during the reign of Queen Victoria, these tiles are typically colourful and patterned, taking influence from medieval designs. Many property owners in the 21st century understand the value original features such as these floors can have and have chosen to maintain these original tiles.

Restoring them however isn’t always an easy process and we often get asked to deep clean and seal these floors including the example below of a Victorian tiled hallway in the hallway of a grand house in Warrington where the old sealer had gradually worn off allowing the tiles beneath to become dirty and discoloured.

Warrington is an area in Cheshire that expanded and urbanised during the Industrial Revolution period of the 18th and 19th centuries, with its major industries including steel and textiles. This coincided with the growing prosperity of the town, and as people grew wealthier they were able to build fantastic houses with equally fantastic Victorian tiled floors.

Cleaning a Dirty Victorian Tiled Hallway

To begin the restoration, I applied a strong dilution of Tile Doctor Pro-Clean, which is a high alkaline product, to both remove ingrained dirt and strip away any remaining old sealer that was still present on the tiles. It’s important to strip the floor of all old coatings and sealers to ensure optimum performance by the new sealer and also to avoid patchy results. The product was left to dwell on the floor for twenty minutes to break down the sealer and seep into the pores of the stone. I then scrubbed the tiles with a black pad and rotary machine to work the Pro-Clean deep into the tile.

Victorian Tiled Floor Before Cleaning Warrington

The resulting soiled cleaning solution was then removed using a wet vacuum machine and the floor was rinsed with water. There were a few stubborn areas that needed further work so these were spot treated using the same process and then followed this by neutralising anytrace of cleaning product on the tiles with a thorough rinse of water. I dried the tiles with the wet-vacuum once more before leaving them to dry out over the course of two days.

Victorian Tiled Floor Before Cleaning Warrington

Sealing a Victorian Tiled Hallway

Upon my return to the property I sealed the Victorian tiles using a combination of sealers which we have found is the most effective method of sealing Victorian tiles. Firstly, I applied a single coat of Tile Doctor Colour Grow, which is a colour intensifying impregnating sealer that soaks into the tile and really lifts the colourful the Victorian designs. Secondly, I applied four coats of Tile Doctor Seal and Go, which provides a durable low-sheen finish (as requested by the customer) and will protect against dirt and stains.

Victorian Tiled Floor After Cleaning Warrington

The customer was over the moon with the finished result. We love restoring these
original Victorian tiles because the transformations are truly in incredible. It’s easy to see why so many people want to have them maintained because they really add character to any property.

Victorian Tiled Floor After Cleaning Warrington

 
 
Source: Victorian Tile and Grout Cleaning and Restoration Service in Cheshire

Removing Paint from a Victorian Hallway Tiles in Oxfordshire

When you decide to undertake a complete renovation of a property, it’s inevitable that floors will be in some way affected by the decorating. At this property in Oxford a renovation had just recently taken place, leaving the black and white patterned Victorian tiled floor covered in concrete residue, plaster and paint.

Victorian Tiled Floor Before Cleaning Oxford

Naturally, the property owner was keen to have the appearance of the tiled restored, to match in with the completely rejuvenated house. I was called in to see what could be done to resolve the problems.

Cleaning a Dirty and Stained Victorian Tiled Floor

I started the restoration by rinsing the floor thoroughly using Tile Doctor Grout Clean-Up which is a concentrated phosphoric acid cleaner used to remove the plaster, concrete, paint and adhesive residue. I then rinsed the floor with fresh water to neutralise the chemicals and extracted all the fluids using a wet vacuum.

Following this, I opted to apply a series of diamond burnishing pads to grind off any particularly stubborn instances of residue, rinsing the tiles with water after each.
Unlike the pads, we use to burnish the shine back onto high end polished stone such as Limestone, Marble, and Travertine these pads were very coarse 100 and 200 grit milling pads rinsing with water after each pad and finishing with a 400 grit burnishing pad. This process thoroughly cleaned the floor and removed all the paint.

Sealing a Victorian Tiled Floor

After leaving the floor to dry completely for a couple of days, I returned to the property to seal the tiles. Once satisfied that the floor was damp-free and ready to be sealed, I chose to apply a combination of two products.

Firstly, I applied a coat of Tile Doctor Colour Grow, which is an impregnating sealer designed to enhance the natural colours and shades in the stone, but with a matte finish. Secondly, I applied a few coats of Tile Doctor Seal & Go, which provides the high quality, durable sheen finish that the customer had requested.

Victorian Tiled Floor After Cleaning Oxford

Having the best of both worlds with these sealers really worked wonders for the appearance of the tiles and would highly recommend this combination of sealers for Victorian tiles. The customer was very pleased with the result of the restoration and can now enjoy her fully renovated house – complete with a fantastic looking Victorian tiled floor.
 
 
Source: Victorian Tile and Grout Cleaning and Restoration Service in Oxfordshire

Restoring a Victorian Tiled Hallway in South Wales

This Victorian tiled hallway floor at a house in Penarth needed a deep clean and seal but also there was the added complication of what to do with the under stairs area as you will see in the photographs below. There were many options to consider and after many visits to the property to discuss various options we finally decided on adding new replacement tiles that complimented the main colour in the floor.

Victorian Hallway Penarth Before Restoration

This floor was in quite a bad state covered in paint splashes and cement after new damp proofing also under the staircase there were no tiles just cement which the customer hoped could be tiled. I assured the customer that they made the right choice by contacting Tile Doctor that they would be very happy with the outcome of their project.

Repairing a Victorian Tiled Hallway Floor

Using a Kango hammer I first removed all the cement from area under the stairs that was to be retiled to get the main mess out of way then scraped off as much cement and paint off the tiled surface as possible. Once this was done and the area clear I was able to re-cement the area to be tilled to the right level and once dry tile the area with tiles in the chosen colour from a company known as Original Style which produce good tile replicas.

Victorian Hallway Penarth During Restoration Victorian Hallway Penarth During Restoration

Deep Cleaning Victorian Hallway Floor Tiles

The floor was checked for moisture which proved dry and then cleaned with a mixture of Tile Doctor products including NanoTech HBU Remover (HBU stands for Heavy Build-up), Remove and Go to tackle the paint splashes and to ensure any sealers were removed and Pro-Clean which is another powerful cleaning product. All these products are safe to use on tiles floors and were worked into the tile and grout using a scrubbing pad fitted to a rotary machine.

Once the floor was clean the soiled cleaning solution was extracted from the floor using a wet vacuum and the floor then thoroughly rinsed down with water, again extracted using a wet vacuum. Problem areas were re-treated by hand and scraped using wire wool and Tile Doctor Grout Clean-up which is an acid product designed to remove cement stains and grout smears. The floor was then rinsed again to remove any product traces, dried as much as possible with the wet vacuum and left to dry off overnight.

Sealing a Victorian Floor Sealing

I came back the next day to seal the floor, checking the tiles for moisture first using a damp meter. To seal the tiles, I used Tile Doctor Seal and Go which adds that protective layer and a nice sheen to the floor.

Victorian Hallway Penarth After Restoration Victorian Hallway Penarth After Restoration

The replacement tiles blended in well with the original Victorian floor tiles which now following the deep clean and re-seal looks like a new installation.

Victorian Hallway Penarth Before Restoration

 
 
Source: Victorian Tile and Grout Cleaning and Restoration Service in South Wales

Deep Cleaning Victorian Tiles in Cornwall

This Victorian tiled hallway at a house in the coastal town of Newquay actually dates back to the 1920 as opposed to the Victorian era, however the method of making them didn’t really change until after the 2nd World War, as such Victorian and Edwardian tiles can all be cleaned using the same methods. The tiles had actually been hidden under carpet and you can still see the carpet gripper and adhesive along the perimeter of the floor in the photographs below:

Old victorian tiled floor before cleaning in Newquay Old victorian tiled floor before cleaning in Newquay

Cleaning Victorian Floor Tiles

Before starting the clean I took several readings with a damp meter to understand if there were any underlying damp issues that may have been exacerbated, most of these old floors have no damp proof course so it’s always good to understand the inherent level of dampness in the floor before starting.

Fortunately there was no evidence of major dampness so I proceeded with the cleaning by applying a dilution of Tile Doctor Pro-Clean which is an effective alkaline cleaner that is safe to use on these tiles and left it to dwell on the floor for ten minutes before working it in with a Rotary Machine fitted with a scrubbing pad. It was then time to break out a stiff brush to get into the grout lines where the pads can struggle to reach. The last step was to remove the soiled cleaning solution with a wet vacuum and give the floor a rinse with Acid Gel which keeps the Alkaline salts in the floor at bay and avoids any efflorescence issues that are quite common with these old floors.

Sealing the Victorian Tiled Floor

I came back the following day and damp tested several areas again to make sure the floor was dry; the results confirmed the floor had dried and ready for sealing. I sealed the floor using five coats of Tile Doctor Seal and Go which provides the satin finish the customer wanted whilst offering excellent stain protection. You have to leave each coat to dry before applying the next so this process can take some time.

Old victorian tiled floor after cleaning in Newquay Old victorian tiled floor after cleaning in Newquay

 
 
Source: Victorian Tile Cleaning and Restoration Service in Cornwall

Renovating A Dirty Victorian Tiled Hallway

This extremely dirty and dull Victorian tiled hallway floor was at a house in Westcliffe on Sea near Southend. The tiles were well overdue for a deep clean and having worked on many of these types of floors before I was confident we could do the job.

Victorian floor before cleaning Westcliffe on Sea

Deep Cleaning Victorian Floor Tiles

Any sealer that was originally present had worn off years earlier so I went straight in with a strong solution of Tile Doctor Pro-Clean diluted 1:1 with water. This was applied to the floor and left to soak in for ten minutes before being worked into the tiles with a black scrubbing pad fitted to a rotary buffing machine.

The soiled cleaning solution was then removed using a wet vacuum and the floor was rinsed. The process was then repeated a few times to ensure all the ingrained dirt had been removed and we also tackled a few paint splashes that became evident. The floor was given a final and thorough rinse with water to ensure all trace of cleaning products had been removed and dried as much as possible using a wet vacuum.

Sealing Victorian Floor Tiles

The Victorian tiles were left to dry out for two days before we returned and the floor checked for dampness using a damp meter. Everything checked out OK so we proceeded to seal the tiles using numerous coats of Tile Doctor Seal and Go which is our recommended sealer for Victorian tiles as it gives a nice low sheen effect that enhances their appearance as well as protecting them from future staining.

Victorian floor after cleaning Westcliffe on Sea

 
 
Source: Victorian Tile Cleaning and Sealing Service in Essex

Repairing a Victorian Tiled Hallway in North London

A customer in Islington had part of their Victorian tiled floor damaged due to building work and contacted us to ask if it was possible to restore it back to life as they didn’t want to lose such an original feature from their house. Victorian tiled floors are quite popular in the UK and we regularly complete restoration projects of this type so we were confident it could be restored.

Victorian tiled floor before repair Islington Victorian tiled floor before repair Islington

Laying Victorian Floor Tiles

Finding replacement tiles was the key to restoring this floor however over the years we have built-up a list of UK suppliers who specialise in Victorian tiles so fortunately we were able to source a matching set and completely rebuild the area at the bottom of the stairs with replacement tiles.

Cleaning Victorian Tiles

The next task was to set about cleaning the tiles using Tile Doctor Pro-Clean worked in with black scrubbing pads fitted to a rotary buffer machine. The soiled solution was then extracted using a wet vacuum and the floor rinsed with water. Final step of the cleaning process was to give the tiles an acid wash using Tile Doctor Acid Gel which removed old traces of grout and other mineral deposits such as efflorescence from the floor. Once happy that is had done its job is was extracted from the floor and then the tiles were given a thorough rinse and left to dry off overnight.

Sealing Victorian Tiles

Next day we sealed the floor using Tile Doctor Colour Grow which is a breathable solvent based sealer, and is also very good at lifting the colours out of the clay tiles as providing a seal that will help protect the tiles from stains going forward.

Victorian tiled floor before repair Islington Victorian tiled floor before repair Islington

Another fantastic restoration completed and well worth the time that went into it, it’s great to see such a lovely feature in a house of this age which I’m sure adds value to the property.
 
 
Source: Victorian Tile Cleaning and Restoration Service in North London

Extending a Victorian Tiled Hallway in Kent

This customer has recently purchased a house in Sevenoaks and was looking to extend and reconfigure the interior layout. As part of this, they had removed a wall, effectively extending the hallway which had been tiled in fantastic original Victorian tiles. Naturally, they felt the extended hallway should look the same and wanted the Victorian tiles extending into this new area with matching tiles.

Victorian floor before cleaning Sevenoaks

Also, the existing tiles had not been cleaned and sealed for some time and were now overdue a deep clean and fresh seal, this however would to work to our advantage as cleaning the existing floor and then sealing the whole floor in one go would help the new tiles blend in with the original.

Victorian floor before cleaning Sevenoaks

Cleaning a Dirty Victorian Tiled Hallway

To clean the floor, I applied several different products. When cleaning Victorian tiles, I usually start by applying our heavy duty cleaner known as Tile Doctor Remove and Go because it is particularly effective at breaking down grime that has been built up on these tiles over many years, and as its name suggests strips away any old sealer. This is left to dwell on the tile for ten to fifteen minutes before being scrubbed in with a black scrubbing pad fitted to a rotary floor buffer.

Once the cleaning slurry from the Remove and Go had been vacuumed up and cleared completely from the area, I then applied a strong solution of Tile Doctor Pro Clean, a high alkaline cleaner which helps to get deep into the stone to eliminate ingrained dir and staining.

I finished the deep cleaning process by applying a solution of Tile Doctor Grout Clean Up, which is an acid-based cleaner that is good for removing grout haze and other mineral deposits such as effloresce. After diluting it with water, I used it to rinse the floor, neutralising any efflorescence and limescale. It also assisted in opening the pores in the clay based tiles to get them ready for an impregnating sealer.

Laying a Victorian Tiled Hallway

The next step was to extended the hallway using reproduction tiles which I had sourced to match the existing Victorian pattern. There were also a couple of areas where the existing tiles need replacing. Rebuilding Victorian tiled floors is quite a common request for Tile Doctor so over the years we have built up a good list of suppliers and often source tiles from ebay that we keep in stock in case someone needs them.

Sealing a Victorian Tiled Hallway

One the new tiles were laid and the grout had gone off I returned to complete the project by sealing the whole floor with a couple of coats of Tile Doctor Colour Grow, a colour-enhancing impregnating sealer that leaves the floor richer in colour while retaining the natural looking matte finish requested by the customer.

Victorian floor after cleaning and rebuilding Sevenoaks

The photos show just how great the results were – the customer was very pleased with their newly extended and refreshed Victorian tiled hallway.

Victorian floor after cleaning and rebuilding Sevenoaks

 
 
Source: Victorian Tiling and Renovation Service in Kent

Deep Cleaning Victorian Floor Tiles in South Essex

These photographs are from a dirty Victorian tiled hallway floor at a house on Mersea Island which is south of Colchester in the Colne Estuary. The tiles were in good physical condition but the sealer had worn down and dirt had become lodged in the pores of the tile causing them to look dull and faded.

Dirty victorian floor before cleaning Mersea Island

Deep Cleaning Victorian Floor Tiles

To strip off any remaining old sealer and to give the tiles a good deep clean I applied a strong 1:3 dilution of Tile Doctor Pro-Clean with water and worked it into the floor using a rotary buffing machine fitted with a black scrubbing pad.

The now soiled cleaning solution was rinsed off and extracted using a wet vacuum and I could see there were some stubborn stains that would need extra work. To tackle these I used a solution of Nanotech HBU cleaner which was applied and left to dwell for fifteen minutes before being scrubbed in using the black scrubbing pad as before.

The dirty solution was then removed using a wet vacuum and the floor was rinsed thoroughly with water to ensure all trace of cleaning products was removed.

Sealing Victorian Floor Tiles

The Victorian tiles were left to dry out for a few days before we returned to seal the floor using numerous coats of Tile Doctor Seal and Go which is our recommended sealer for Victorian tiles as it gives a nice low sheen effect that enhances their appearance as well as protecting them from future staining.

Dirty victorian floor after cleaning Mersea Island

 
 
Source: Victorian Tile Cleaning and Renovation Service in Essex

Full Victorian Tiled Hallway Restoration in Warrington

Victorian tiles have a classic aura about them. They have been in use for over 150 years but have never really gone out of style due to their unique style and variety of patterns. As such, we often encounter both Victorian tiles that are very old, and Victorian tiles are quite new. Time, however, can certainly expose the tiles to all manner of wear and tear, and regular professional maintenance will always be necessary to keep them looking good.

As you can see from the photographs below, this particularly old Victorian tiled hallway at a house in Warrington was in pretty bad shape, with missing and cracked tiles. Not to mention that it clearly hadn’t been treated to a deep clean and fresh seal in a very long time. The property owner contacted me to set the situation right.

Victorian tiled hallway before restoration Warrington

Repairing and Cleaning Dirty and Damaged Victorian Tiles

Before I could begin with the restoration, it was necessary to order and reinstall replacements for the missing tiles. Fortunately, Tile Doctor maintains a list of suppliers that we can go to for these. Loose tiles were also refixed and grouted, before being left to dry over night. The result was an almost entirely rebuilt floor of original and replacement Victorian tiles.

Victorian tiled hallway during restoration Warrington

The next day I started the restoration by using a hand help flex machine fitted with three-inch diamond encrusted discs to lightly grind out the scratches in some of the original tiles. This was followed by a deep cleaning of the floor with Tile Doctor Pro Clean in combination with a black buffing pad. I repeated the process multiple times with this reliable alkaline cleaner to ensure all tiles were thoroughly and consistently clean.

The last step in the cleaning process was to rinse the floor thoroughly to remove any trace of chemicals, before soaking up any excess moisture using a wet vacuum. I gave the floor another night to dry fully, as it could only be sealed when I was sure all moisture had disappeared.

Sealing Victorian Tiles

On the third and final day of work, I started by checking the tiles were completely dry. This is essential because even a small amount of moisture can cloud the sealer and prevent it from performing correctly.

When satisfied with the state of the floor, I proceeded to seal it with a combination of six coats Tile Doctor Seal and Go and one coat of Tile Doctor Colour Grow. Seal and Go is a topical sealer that provides a durable layer of protection on the surface of tiles, plus a high-quality sheen finish. Colour Grow, by comparison, is an impregnating sealer, meaning it penetrates into the pores of the stone to act as a barrier against ingrained dirt and stains. It also enhances the range of different colours in the tiles.

Victorian tiled hallway after restoration Warrington

As you can see from the last photographs, this combination of cleaning and two sets of sealer worked wonders to restore the character to the old tiles. My customer was over the moon.

Victorian tiled hallway after restoration Warrington

 
 
Source: Victorian Tiled Hallway Cleaning and Restoration Service in Cheshire

Restoring Victorian Floor Tiles Hidden under Carpet

The owners of this property in Maesteg, a town in the Llynfi Valley not too far from Port Talbot, had decided after many years to remove the carpet covering the downstairs hallway. Upon doing so they revealed some truly fantastic patterned Victorian tiles, and decided that instead of replacing the old carpet with new carpet, they would restore the condition of the original flooring.

Victorian tiled hallway before cleaning Maesteg Victorian tiled hallway before cleaning Maesteg

Whenever you remove carpet that has been hiding tiled flooring, it’s almost inevitable that you will find traces of rubber underlay, glue and cement deposits, and paint stains – or, in this particular case – a combination of all the above. The best course of action to bring original tiles back to their peak condition is to seek professional restoration. Everyday cleaning products and DIY methods rarely achieve the desired result. As the local Tile Doctor, these property owners contacted me to get the job done efficiently and effectively. Here’s how I did it.

Cleaning an Old Victorian Tiled Hallway Floor

Upon arriving at the property, I started by checking the floor for any inherent moisture problems. This was important to do considering that the tiles appeared quite old; thankfully there were no major issues that would have affected the restoration.

After checking for moisture, I began the cleaning process by manually scrapping off as much of the heavy glue and cement deposits as possible to clear the area and give the cleaning products an easier time of penetrating deep into the tiles.

I then mixed a strong cleaning solution consisting of three of our products: Tile Doctor Pro Clean, Remove and Go and NanoTech HBU. Pro Clean is a reliable cleaner that cans be used on most natural stone floors, Remove & Go helps with the removal of glues, adhesives, and old sealers, and NanoTech HBU uses nano-sized cleaning particles to penetrate beneath tough stains, dissolve them, and lift them out.

This solution was worked into the tiles using a rotary machine fitted with a coarse black pad, before I rinsed the floor thoroughly. Then, on my hand and knees, I carefully checked every tile for any additional paint splashes or other deposits, using a handheld scraper and wire wool in combination with Tile Doctor Grout Clean Up to remove any I came across. This cleaning method for this type of floor is generally always successful.

Sealing a Victorian Tiled Hallway Floor

After leaving the floor to dry overnight I returned to the property, once again checking for moisture. Happy that the floor was ready to be sealed, I applied six coats of Tile Doctor Seal and Go, which not only provides a protective layer but also gives the tiles to a beautiful low sheen finish. Seal and Go is best suited for use on internal, porous surfaces such as Victorian, Quarry, Sandstone and Slate.

The two photos below show the outcome of the restoration. The transformation achieved in the space of one day was exceptional and needless to say the customer was over the moon with their new Victorian tiles.

Victorian tiled hallway after cleaning Maesteg Victorian tiled hallway after cleaning Maesteg

 
 
Source: Victorian Tiled Floor Cleaning and Restoration Service in South Wales

Repairing Victorian Hallway Tiles in North Yorkshire

The colourful and diverse geometric patterns of a Victorian tiled floor can give a property a regal, elegant and timeless feel, making it a popular choice even in the 21st century. However, as time passes without regular care and maintenance, Victorian tiles can quickly lose their colour and appear deadened by the buildup of dirt and dust over several months (and sometimes years).

This property owner in Hebden a very small village in North Yorkshire of less than 300 people, had this common problem. Her Victorian tiled hallway had not been adequately maintained and was now more difficult to keep clean than ever. To add to the problem, most of the tiles along the edges were either broken, cracked, or filled with holes, probably I suspect from the installation of carpet grippers at some point in the past.

Victorian tiled hallway before cleaning Hebden

At this point, the property owner turned to Tile Doctor to see what could be done.

Victorian tiled hallway before cleaning Hebden

Repairing and Cleaning a Victorian Tiled Hallway

Before beginning a deep clean of the entire length of the hallway, it was first necessary to source and install replacement tiles for those that had been broken and damaged. I also relaid any that were loose.

When finished, I left the tiles to set and returned the next day to start the clean. My choice of cleaner in this situation was Tile Doctor Pro Clean, which was scrubbed into the floor with a special pad fitted to a rotary machine to break down ingrained dirt and stains. Pro Clean does this very effectively on all types of tile, including natural stone and of course Victorian tiles.

The floor was then rinsed with water and the soiled cleaning solution extracted from the floor using a vet vacuum. Stubborn areas were re-treated with more Pro Clean, and when I was satisfied with the condition of the tiles the floor was given a final but thorough rinse to remove any trace of cleaning product.

Sealing a Victorian Tiled Hallway

The floor was then left to dry completely overnight to ensure all excess moisture had disappeared, leaving it fresh to be sealed. I returned in the morning for a third day of work to seal the Victorian tiles with four coats of Tile Doctor Seal and Go, a topical sealer which provides a rich satin finish to really add depth to the colours in the tile while protecting it against dirt and stains.

Victorian tiled hallway after cleaning Hebden

The customer was delighted with the restoration and couldn’t quite believe the huge improvement in the appearance of the tiles, especially in regards to the enhancement in the different colours. Another satisfied customer!

Victorian tiled hallway after cleaning Hebden

 
 
Source: Victorian Tile Cleaning and Restoration Service in North Yorkshire

Restoring Dull Victorian Hallway Tiles in the Derbyshire

From The 1860s Victorian tiled floors started to appear in public buildings and by the 1890s they had become an essential feature in the most ordinary Victorian terraced houses. Although these floors fell out of fashion during the 1960s and ’70s, when many of them were covered over, they are now being rediscovered by their present owners and this is exactly what happened to my customer in the village of Littleover.

Victorian floor before renovation in Littleover

The customer had attempted to clean the floor by themselves but they couldn’t archive the result wanted, fortunately they discovered the Derbyshire Tile Doctor and after their call I went over and did a test for cleaning to make sure I can archive the needed results. They were happy with what they saw, so they booked me in to complete the work.

Victorian floor before renovation in Littleover

Cleaning a Victorian Floor Tiles

For cleaning the hallway I used a strong dilution of Tile Doctors Pro Clean which is strong multi-purpose high-alkaline cleaner. I left the Pro Clean to dwell for 10 minutes and then worked it in the tiles by using a strong black scrubbing pad fitted to my rotary machine. After scrubbing I rinsed the floor several times with clean water to remove any trace of cleaning product from the floor.

After successfully cleaning the hall I moved on to the porch which still had some old topical sealer on less walked areas. On these areas I had to use Tile Doctors own very effective stripper Remove and Go. Remove and Go has a long dwell time to remove any given sealer or wax so I left it to soak in for fifteen minutes followed by scrubbing it in with black pad fitted to rotary machine. The next step was to wash off the residue with water which was then removed using a wet vacuum.

Victorian floor before renovation in Littleover Victorian porch floor before renovation in Littleover

Following this the tiles were given a rinse with Tile Doctor Grout Clean-up which is an acid based product that can remove grout smears and mineral deposits. Last step before sealing was to give the floor a thorough wash down with clean water to remove any cleaning product left on the tiles and then I left the floor to dry overnight.

Sealing a Victorian Tiled Floor

Next day when I returned I used my damp tester to make sure that the floor is completely dry. Luckily for me floor was all dry and I started sealing. For sealing I used Tile Doctors Colour Grow Sealer which is colour enhancing breathable sealer. I applied 2 coats of the sealer and after every coat I polished off the excess with clean cotton cloths.

Victorian floor during sealing in Littleover

The result was really good and my customer was very happy with the work and said that now the floor looks transformed.

Victorian floor after renovation in Littleover

 
 
Source: Victorian Tile Cleaning and Maintenance Service in Derbyshire

Deep Cleaning Victorian Floor Tiles in Newport

At Tile Doctor, we often come across Victorian tiled hallways in need of restoration. They’re very popular due to their timeless and unique patterns – and as a result are still in production, having first being produced in the 19th century. While many have been maintained in their original state since first being laid (which is sometimes over a century ago), others have been hidden by carpet or linoleum for many years, only to be uncovered by new property owners.

In this case, at a property in Newport – the port city of South East Wales – the Victorian tiled hallway had not been subject to an effective cleaning plan leaving the fantastic white and black checkered pattern grubby and unsightly. I was asked if I could help bring it back to life – and I was happy to oblige!

Victorian floor before cleaning Newport

Cleaning a Dirty Victorian Tiled Hallway

I started the restoration by applying a strong cleaning solution combined from mixing two Tile Doctor products in equal parts namely Remove and Go and Pro Clean. Together they create a powerful sealer remover and cleaner to break down any remaining old sealers, paint whilst lifting ingrained dirt and muck from the pores of the tile.

The two products were worked into the tiles using firstly a 17 inch black buffing pad to remove the initial layer of dirt, followed by a 6 inch buffing pad, wire brush, and hand-held scrapper to remove the more stubborn specks of paint and dirt. The resultant slurry was then rinsed away with water and a wet vacuum and stubborn areas retreated until I was satisfied. The results were great so after a final rinse I left tiles to dry off.

Sealing a Victorian Tiled Hallway

A couple of days later, after leaving the tiles to dry completely, I went back to the property to seal the floor. I checked first for any excess moisture as this can cloud the sealer and prevent it from acting an effective barrier against dirt and stains.

My choice of sealer included one coat of Tile Doctor Colour Grow to restore the rich colour to the black and white tiles, followed by seven coats of Tile Doctor Seal and Go to provide an aesthetically pleasing sheen finish. Colour Grow is an impregnating sealer that penetrates the pores of the tile to fill them and prevent dirt becoming trapped, while Seal and Go is a topical sealer that builds up an additional layer of protection on the surface of the tiles.

Victorian floor after cleaning Newport

The combination of fresh sealers, preceded by a deep and thorough clean, really helped to restore these Victorian tiles to a condition in which they could be easily mistaken for newly laid! The customer was very pleased and undoubtedly will be looking forward to showing off the tiles to friends and family.
 
 
Source: Victorian Tile Cleaning and Maintenance Service in Monmouthshire

Restoring a Victorian Hallway Floor in Bridlington

It’s fairly common for owners of older properties – especially houses those that are over 100 years old or more – to find original Victorian tiled flooring hidden underneath carpet. It can wait years for the tiles to be discovered, by which time they have amassed huge amounts of dirt and dust.

Such was the case at this property in Bridlington, a Yorkshire town through which a stream known as the ‘Gypsey Race’ runs, before emptying in the North Sea at the Bridlington Harbour. Interestingly enough, folklore says that when the stream is flowing, bad fortune is at hand. The stream must not have been running on the day that we restored this Victorian hallway, as we managed to achieve some truly fantastic results!!

Victorian hallway floor tiles before restoration in Bridlington

The hallway had been severely dulled after going years without professional care. We set about giving it the thorough clean and fresh seal that I’d des partly needed. Here’s how we did it.

Victorian hallway floor tiles before restoration in Bridlington

Cleaning a Dirty Victorian Tiled Hallway

Our first task was to remove any old, no longer effectual sealer. We did this by liberally applying a strong dilution of our alkaline-based Tile a Doctor Pro Clean, which doubles as a reliable cleaner and a stripper capable of stripping away old sealer. The product was worked into the tiles using a black stripping pad fitted to a 17″ rotary machine, and the process was repeated three times.

Victorian hallway floor tiles during restoration in Bridlington

I noticed that there was still some stubborn dirt and old sealer around the edges of the hallway, so I used some of our handheld diamond encrusted burnishing blocks to grind it away. To finish the cleaning process, we washed the floor with Tile Doctor pH Neutral Tile Cleaner, leaving it fresh and ready to be sealed once left to dry overnight.

Sealing a Dirty Victorian Tiled Hallway

Upon our return to the property the next day, we ran some quick tests to check for any excess moisture (even a small amount could have damaged the performance of the new sealer). Once satisfied with the the condition of the floor, we proceeded to see it with an impregnating sealer, meaning a sealer that penetrates into the pores of the tile to fill them and therefore prevent trapped dirt and ingrained stains.

Victorian hallway floor tiles after restoration in Bridlington

Our impregnating sealer, Tile Doctor Colour Grow, has the added benefit of being colour intensifying, which really highlights the unique colourful patterns of the tiles. To give the floor a durable sheen finish, as requested by the customer, we also added a coat of Tile Doctor Seal and Go sealer.

Victorian hallway floor tiles after restoration in Bridlington

The result was a complete transformation of the condition and appearance of this great Victorian tiled hallway. Our customer is very pleased – the floor is now a complete asset to any property, and will now be easier to keep looking great in future.
 
 
Source: Victorian Flooring Cleaning and Maintenance Service in East Yorkshire

Victorian Vicarage Floor refreshed in Caldicot

I was asked to take a look at this fantastic classic Victorian tiled floor at an old vicarage in Caldicot which was built in the early 1800s, the floor was structurally sound but was now looking washed out and overdue some TLC.

Victorian floor tile before deep cleaning Caldicot

Repairing and Cleaning Dirty Victorian Tiles

I started by using a 50/50 mixture of Tile Doctor Pro-Clean and Remove and Go diluted with water to create a powerful stripper/cleaner that would take off any remaining old sealer and many years’ worth of dirt. I followed the usual process of applying the solution, allowing it to dwell for then minutes and then scrubbing it in with a scrbubbing pad fitted to a rotary floor machine.

The thin grout lines were also treated with the same solution but scrubbed with a stiff brush by hand. This process released the dirt from the tile which was then rinsed away using more water and a wet vacuum to extract the solution from the floor. I then repeated the process until satisfied the floor was clean.

A couple of days later I went back to seal the floor but on removing the dust sheets I could see much of the floor was covered in effervescence from the salts that had risen up through the tile as it dried. I could not seal the floor like that so I applied tile doctor’s new Acid Gel product to get rid the problem.

Sealing Victorian Tiles

A couple of days later I returned again and this time I was able to proceed and sealed the Victorian tiles using eight coats of Seal and Go which adds a nice subtle sheen to the tiles and will protect the floor going forward.

Victorian floor tile after cleaning and sealing Caldicot

The floor now looks much fresher and the sealer should keep it looking that way for some time to come.
 
 
Source: Victorian Tile Cleaning and Maintenance Service in Monmouthshire

Restoring and Repairing a Victorian Hallway Hidden Under Carpet for 15 years

It’s a wonder why any property owner would want to cover an original Victorian tiled floor but I guess it was the fashion at the time. Fortunately, times have changed and home owners are now looking to restore original features back to their property as they bring a real sense of character and personality, especially if the tiles laid are colourful and have interesting design patterns.

In this case the former owner of this house in Coundon near Coventry had opted to hide the fantastic hallway and doorway Victorian tiles with carpet some 15 years earlier. Now, the new owner was keen to restore the floor as an original feature.

victorian tiled floor before refurbishment in coundon

The tiles weren’t in great shape to begin with. In several areas there was a need to reaffix or entirely replace some loose and damaged tiles. Needless to say, the tiles which has been hidden by carpet for many years were in dire need of a thorough clean and fresh seal, and there were areas where mineral salt deposits had emerged over time. A full restoration would require me to address all of these issues – here’s how I did it.

Cleaning and Repairing a Dirty and Damaged Victorian Tiled Floor

Prior to starting a deep cleaning process, I ensured the damaged and loose tiles were carefully replaced and re-grouted. Fortunately, over the years I have built up a nice collection of spare Victorian tiles so sourcing replacements for the broken ones was not a big problem.

victorian tiled floor refurbishment tiles in coundon victorian tiled floor before refurbishment in coundon

Then, to clean the tiles, I applied a strong cleaning solution consisting of Tile Doctor Remove and Go, which helps to remove any old sealers, and Tile Doctor Pro Clean, which deals with any ingrained dirt and general muck afflicting the tiles.

To help with the cleaning – especially in regards to the aforementioned minerals salts issue – I applied Tile Doctor Acid Gel, which is a blend of phosphoric and hydrochloric acids in a handy and easy-to-apply gel form. When worked into the tile using a black scrubbing pad, the Acid Gel successfully neutralised the alkaline-based salts. To finish off the cleaning process, I steam cleaned the floor, soaked up any excess moisture with a wet vacuum, and installed fans to speed up the drying process.

Sealing a Victorian Tiled Floor

The next day the tiles were dry and ready to be sealed so I wasted no time and started the application of several coats of our impregnating sealer Tile Doctor Colour Grow. As an impregnating sealer, Colour Grow penetrates and fills the pores of the stone to prevent dirt from becoming trapped. This makes it easier for the property owner to keep the tiles clean in future.

victorian tiled floor after refurbishment in coundon

Colour Grow also provides the added benefit of enhancing the colours in the tile, making them more vibrant and characterful. The natural matte finish left by Colour Grow was exactly as the customer requested. At the end of two days work I left the house with some revitalised Victorian tiles and a very happy customer.

victorian tiled floor after refurbishment in coundon

 
 
Source: Victorian Tile Restoration Service in Warwickshire

Removing Cement Screed From a Victorian Tiled Floor

When you uncover a tiled floor after it has been covered by carpet for many years, it’s almost a given that it will be in a bad state. However, my customer, who lives in the town of Lymm, wasn’t expecting the Victorian tiled hallway they had recently uncovered to be in quite so terrible a state. As you can see from the photograph, it has been completely devastated by paint plaster and a big pool of cement floor leveller. Understandably, the formerly colourful appearance of the tiles had completely drained and it would require a through restoration to get them back into a usable condition.

Victorian Floor Uncovered Before in Lymm

Cleaning a Victorian Tiled Floor

To begin the restoration, I mixed a strong cleaning solution which consisted of Tile Doctor Remove & Go combined 50/50 with Tile Doctor Pro Clean. Remove & Go is a heavy duty remover that breaks down old sealers, along with adhesives, paint stains and other tough soil build up where as Pro-Clean is a versatile alkaline-based cleaner that reliably eradicates dirt on a wide variety of natural stone floors.

The solution was applied liberally across the floor, and left to dwell for a short period, allowing time for it to soften up the paint plaster. Next, I fitted a coarse scrubbing pad to my rotary cleaning machine and began to scrub the solution into the tiles, with a big difference to the appearance of the tiles being made quite quickly. The resulting cleaning slurry was promptly removed using a wet-vac machine.

I repeated the process two times to provide an extra thorough clean and then give the floor a thorough rinse. Some particularly stubborn marks remained on the floor which I was able to remove using Tile a Doctor Acid Gel, a blend of phosphoric and hydrochloric acids in gel form that’s easy to control. The floor was then left to dry fully overnight.

Sealing a Victorian Tiled Floor

The next morning, I returned to the property and ran some damp tests. This is incredibly important to do before sealing any tiled floor because any excess moisture can cloud the sealer and prevent it from doing its job properly.

Once satisfied that the floor could be sealed, I applied several coats of Tile Doctor Seal and Go, our topical sealer which provides both a robust surface seal and a long-lasting low sheen finish in one and ideal for Victorian tiles.

Victorian Floor Uncovered After in Lymm

It would be an understatement to say that this Victorian tiled floor was transformed. The customer was amazed at the results considering how bad a state the tiles had been in just a day earlier. When you have a situation like this, it’s hard to believe the tiles could ever be fully restored. Nonetheless, we could now see them in their full and original glory, and needless to say, the customer was very, very pleased with the result.
 
 
Source: Victorian Tile Restoration Service in West Cheshire

Restoring Old Victorian Lobby Tiles and Hallway

The owner of this property in Swansea contacted me recently about a two-part job that would involve the restoration of both a Quarry tiled hallway and a Victorian tiled lobby. The property itself dates back to 1918 – making it nearly a century old – and its safe to assume that both sets of tiles are of a similar age. As you can see from the photographs, they had certainly had absorbed a lot of wear and tear over the years, and as these tiles get older it becomes in increasingly difficult to maintain their appearance.

Cleaning a Quarry Tiled Hallway

A number of the Quarry tiles had at some point in the past been removed to allow the installation of electrical cables below ground, with an unsightly layer of cement left in their place. At a later point I would need to replace these tiles, but initially I needed to remove the old cement, along with any old sealer remaining on the floor by applying and scrubbing in Tile Doctor Remove & Go.

Quarry Tiled Floor Before Restoration Swansea

Next, I applied an undiluted solution of Tile Doctor Pro Clean, our effective alkaline tile cleaner, to break down and remove the ingrained dirt. I then rinsed with clean water, and removed the resulting slurry with a wet vacuum. With the floor freshly cleaned, I proceeded to retile the area where tiles were missing.

Cleaning a Victorian Tiled Lobby

The Victorian tiles in the porch/lobby room area were adjoined to the Quarry tiles. In this area there were several loose tiles, and I opted to recement and regrout them before beginning a clean.

Following this the tiles were treated to a thorough clean in a similar fashion to that provided to the Quarry tiles, however, in this case I mixed Remove and Go and Pro Clean to form a powerful cleaning solution. This was applied to the floor, left to dwell for a short period, and then scrubbed into the tiles, quickly bringing them back to life. I then lightly steamed cleaned the floor with a Karcher tool to eliminate or neutralise any chemicals that remained.

Victorian-Tiled-Lobby-Floor-During-Restoration-Swansea-114646

Sealing Quarry and Victorian Tiles

I left the two sets of tiles to dry out fully overnight. Upon my return to the property, I ran damp tests to confirm that the floors were ready to be sealed. The customer had asked for a satin finish on both floors, so I decided to use Tile Doctor Seal and Go. This topical sealer provides a durable sheen seal, and is a cost-effective option for Quarry and Victorian tiles. I applied seven coats of Seal and Go in total across both sets of tiles.

Quarry-Tiled-Floor-After-Restoration-Swansea-112352 Victorian-Tiled-Lobby-Floor-After-Restoration-Swansea-112433

The customer and myself were delighted with the results. In the space of just a couple of days these classic tiles have been brought been completely revitalised, and thanks to the application of a fresh sealer will be easier for the customer to keep clean going forward.
 
 
Source: Victorian Lobby Tile Cleaning and Maintenance Service in South Wales

Victorian Hallway Tiles Restored in Cheshire

This set of photographs are from a house in the Warrington suburb of Stockton Heath where my client had discovered a Victorian Tiled floor under carpet in the hallway and was keen to have it restored back to its original condition. You can see from the photograph below that it was in quite a state with dirt and paint splashes however I was confident we could manage it.

Victorian Tiles Before Restorative Cleaning Stockton Heath

Deep Cleaning the Victorian Tiled Floor

On arrival I started to protect the skirting boards and entrance carpet to another room. Once that was done i started to strip the paint splashed and any remaining sealer from the floor using Tile Doctor Remove and Go which is an effective coatings and sealer remover that unlike some products is perfect safe to use on Victorian tiles

Working on the floor the product was diluted, scrubbed into the tile and then left to dwell for twenty minutes before being rinsed off with water which was then removed using a wet vacuum. The floor was now looking a lot cleaner, however I could see a number of stubborn areas that were going to need further treatment so I mixed the Remove and Go 50/50 with another Tile Doctor product called NanoTech HBU (Heavy Build-up Remover), which adds abrasive particles to the solution. This solution was scrubbed in and then rinsed off when i was happy with the condition of the floor. This process took much of the day and once done it was left to dry overnight ready for sealing the next day.

Sealing the Victorian Tiled Floor

On my return the next morning i tested the floor in several places with a damp meter to ensure it was dry. When i was happy the floor was dry i started sealing with thin coats of Tile Doctor Seal and Go leaving thirty minutes between coats to allow it to dry; in total i gave the floor seven coats of sealer which gave the floor a nice shine which the customer was very happy with. As well as enhancing the look of the floor the sealer will provide stain protection going forward.

Victorian Tiles After Restorative Cleaning Stockton Heath

 
 
Source: Victorian Tile Cleaning and Maintenance Service in Cheshire

Restoring the Appearance of Classic Victorian Tiles in Monmouthshire

This black and red Victorian tiled hallway at a property in Newport, the third largest city in Wales, had a timeless charm about it, and a classic diamond pattern. Unfortunately, the tiles had lost their colour, leaving them looking dull and lifeless. It was clear to me, upon further inspection, that the existing sealer had failed, allowing dirt to become trapped in the pores of tile.

This can be a very difficult problem to rectify without the right professional assistance; everyday household cleaners are rarely suitable for sealed floors and acidic cleaners can actually male the problem worse. The tiles needed a deep clean with strong products, followed by a fresh, robust surface seal to prevent dirt from becoming trapped again in the future.

Victorian Hallway Floor Newport Before

Cleaning a Dirty Victorian Tiled Floor

I started cleaning the tiles with a strong dilution of Tile Doctor Pro Clean, worked in to the stone as per usual by using a rotary machine fitted with a black scrubbing pad. Pro Clean is a reliable alkaline cleaner that works well on most kinds of natural stone, and while I could see it made a difference here, it was clear something stronger was required to remove what was left of the old sealer.

To remove this, I applied a dilution of Tile Doctor Remove and Go, which is a dedicated stripper that is safe to use on tile and stone for the purposes of breaking down old sealers, waxes, paints, and adhesives, and this proved effective in getting rid of all the old sealer.

Once the cleaning was complete, I rinsed the floor thoroughly to remove any trace of chemicals left over from the cleaning products, before leaving it to dry overnight.

Sealing a Victorian Tiled Floor

I came back to the property the next day and, after checking the floor was completely dry, I proceeded to seal the floor using eight coats of Tile Doctor Seal and Go. This types of sealer is known as ‘topical’, which means that it builds up a solid layer of protection on the surface of the tile. Topical sealers tend to be more suitable to Victorian and Quarry tiles as they typically require a lot of sealer due to their porosity and these types of sealer are less costly. Seal and Go also adds a nice aesthetically pleasing low sheen finish.

Victorian Hallway Floor Newport After

As you can see from the second photo, this did wonders to the tiles and really brought this classic Victorian pattern back to life. Another satisfied client for the Monmouthshire Tile Doctor.
 
 
Source: Victorian Tile Cleaning and Maintenance Service in Monmouthshire

Beautiful Victorian Hallway Restored in Warwickshire

This Victorian tiled hallway was one of the most beautiful Victorian floors I have ever had the pleasure to work on. With the wide range of patterns and colours they are available in, it seems no two Victorian tiled floors are exactly the same, and this uniqueness is part of what makes them so appealing to property owners.

Unfortunately, this floor had been poorly maintained over the years, even suffering from a few loose and missing tiles. There was a thick coating of dust and dirt soiling its appearance, and the property owner was understandably keen to remedy the situation. Having realised that everyday household cleaners are not likely to achieve great results, she asked me to carry out a full professional restoration, including making some repairs where necessary. I was pleasantly surprised to find out that this property was situated in the town of Wyken, which is a few miles outside of Coventry city centre and in fact just down the road from where I live myself!

Beautiful Victorian Floor Before Cleaning in Wyken

Repairing and Cleaning a Dirty Victorian Tiled Floor

Before making a start on the cleaning process, it was first necessary to re-fix the small number of loose tiles and replace a single missing tile by the radiator. Fortunately, I’ve been working on these types of floors for some time and have built up a good collection of replacement Victorian tiles so I was able to find one that matched in nicely with the rest of the floor without too much problem.

Beautiful Victorian Floor During Cleaning in Wyken

To clean the tiles, I began by applying a layer of Tile Doctor Oxy-Gel directly into the floor with a small brush. This product is very similar to the popular Tile Doctor Pro Clean: both are strong alkaline cleaners, strippers and degreasers, with the main difference being that Oxy-Clean comes in a gel form, making it easier to control and therefore ideal for precise cleaning, or for application to vertical surfaces. Like Pro Clean and being an alkaline base it is suitable for use on all types of natural stone and tile. The Oxy-Gel was left to soak into the tiles for around ten minutes before being scrubbed in and then rinsed off carefully with water, I then used a wet vacuum to extract the now soiled cleaning solution off the floor.

Beautiful Victorian Floor During Cleaning with Oxy Gel in Wyken

The next step was to acid wash the floor using Tile Doctor Acid Gel; this served to break down alkaline mineral deposits inherent in the grout along with some excess grout that had been left on the untidily left on tile from installation. It is recommended not to use this product on acid-sensitive soon such as Marble and Limestone as it can cause irreparable etching but its fine on Victorian tiles as long as you don’t leave it on too long.

Finally, the floor was given a rinse with clean water to remove any trace of chemicals from the cleaning and to neutralise the area in preparation for sealing.

Beautiful Victorian Floor Cleaning Tools in Wyken

Sealing a Victorian Tiled Floor

I left the floor for 48 hours to dry before returning to the property to seal the tiles. This allowed plenty of time for the floor to dry completely, which is important as any excess moisture can damage the ability of the sealer to protect against dirt and stains.

Beautiful Victorian Floor After Cleaning in Wyken

My choice of sealer for this floor was Tile Doctor High Shine; three coats in total were applied, providing – as the product name suggests – the high shine finish that the customer had requested. The sealer will provide durable surface protection going forward preventing dirt from becoming ingrained into the pores of the tile and ensuring it remains easy to clean and keeping its appearance for some time to come.

Beautiful Victorian Floor After Cleaning in Wyken

As a big fan of Victorian tiles, it was a great pleasure to restore this floor, and my customer was certainly pleased too. It’s amazing how far a little professional maintenance can go to improving the appearance of these fantastic types of floor.
 
 
Source: Victorian Tile Cleaning and Restoration Service in Warwickshire

Putting the Life Back into Victorian Hallway Tiles in Monmouthshire

This Victorian tiled hallway at a house in the Forest of Dean had a very interesting pattern, consisting of an array of different colours, including shades of red, yellow and blue. Unfortunately, as you can see from the first photograph below, the tiles had lost all life, with the colours largely masked by months’ – or maybe even years’ – worth of ingrained dirt and muck. The floor as a whole was also suffering from a number of loose tiles that needed to be reset before it could be cleaned.

The property owner was keen to employ some professional assistance to restore the appearance of the floor and prevent it from getting in an even wrote state, and so contacted Tile Doctor who have a lot of experience working with Victorian tiled floors.

Victorian Floor Forest of Dean Before

Repairing and Cleaning Dirty Victorian Tiles

As mentioned, the loose tiles had to be repaired before the cleaning process could be started. I removed the tiles and extracted excess grout and old adhesive from the exposed concrete substrate using a vacuum, before putting the original tiles back into place and fixing them back into position carefully using fresh adhesive and matching grout.

Once happy the replaced tiles had set, I started the process of cleaning the entire area of hallway tiles using a combination of Tile Doctor Remove and Go to strip away the old sealer and Tile Doctor NanoTech HBU (formerly Ultra Clean) remover to get the tiles as clean as possible. The latter product contains nano-sized cleaning particles (hence the name) to reach difficult areas of trapped dirt, making it more effective than your run-of-the-mill tile cleaner. These two products were scrubbed into the tiles using a rotary machine fitted with a black scrubbing pad. The floor was then rinsed with water and the soiled residue was extracted with a wet vacuum.

I then paid particular attention to the grout, applying our alkaline-based multi-purpose cleaner Tile Doctor Pro-Clean to the grout lines, before scrubbing them with a narrow grout brush. This quickly had the grout looking clean again: I’d even go as far as to say that it matched it seamlessly with the fresh grout that had just been laid.

With the tile and grout as clean as it was possible to get it, I gave the whole floor a final rinse to neutralise the excess chemicals. I extracted as much water as possible with a wet vacuum and left the floor to dry overnight.

Sealing Victorian Tiles

My first task upon returning to the property the next day was to check for any dampness. If you neglect to remove all excess moisture from the surface of the tiles before sealing it is more than likely going to cloud the sealer, rendering it less effective I’m protecting the stone against ingrained dirt and stains.

Once satisfied that the floor was completely dry, I proceeded to seal the tiles using multiple costs of Tile Doctor Seal and Go. Seal and Go is what we would classify as a topical sealer, meaning it rests on the surface of the tiles to act as a durable layer of protection against all kinds of muck. While providing surface protection, Seal and Go also adds a nice subtle sheen to the tiles, as per the customer’s request.

Victorian Floor Forest of Dean After

The customer was quite amazed at how quickly the appearance of the tiles had been restored. It was fantastic to see the colours we both knew were hidden in the tiles come to life once again. Another satisfied customer for sure!
 
 
Source: Victorian Tile Cleaning and Sealing Service in Monmouthshire

Restoring Victorian Tiled Lobby in Derby

Victorian tiled floors are timeless – despite first coming into popular use in UK houses during the 19th century, they’ve remained stylish in the eyes of many homeowners and interior designers. This fantastic black and white patterned example at a property in Derby dates back to 1929. However, the owners only recently discovered the floor, it having being hidden under carpet for many years.

Discovering a tiled floor beneath carpet like this is, in my experience, a relatively common occurrence, yet it can be difficult to restore the tiles back to their original condition without professional assistance. In this instance – as is the case with most examples – the tiles were marked with numerous glue stains from where the carpet had been originally installed. Initially, the customer had tried to clean the tiles themselves but, despite successfully removing most of the glue stains, they couldn’t achieve the full restoration they were hoping for.

Victorian Floor Dated 1929 Before Cleaning and Sealing

This is where I stepped in – to provide the floor with the deep clean and fresh seal it desperately needed.

Victorian Floor Dated 1929 Before Cleaning and Sealing

Cleaning a Victorian Tiled Floor

While the customer had succeeded in providing the tiles with a basic clean, I needed to take it one step further. To do this, I firstly mixed a strongly diluted solution of Tile Doctor Pro-Clean and water, before applying this to floor and scrubbing it directly into the tiles using a black scrubbing pad fitted to my buffing machine.

Pro-Clean is multi-purpose high-alkaline cleaner, stripper and degreaser. This did the job to remove ingrained dirt in large areas of the floor, but in some places a stronger product was required. To tackle these stubborn areas, I used Tile Doctor NanoTech HBU, which was applied to the floor in combination with my steam cleaner. NanoTech HBU is a heavy soil build-up remover designed to reaches areas within the stone that other cleaners are unable to. It utilises nano-sized particles to penetrate below tough stains, dissolve them, and lift them out.

After a thorough clean with this product the floor looked ready to be sealed. Nonetheless, before moving on to the sealing process, I carefully rinsed the entire floor three times with fresh water to rid the floor of any excess chemicals left over from the cleaning. I then removed the water with my wet vax machine.

Sealing a Victorian Tiled Floor

I left the floor to dry for five days as there was a slight dampness issue in one corner. When I returned to the property, I made sure the floor was completely dry by conducting several damp tests. The corner with the damp issue was just a bit damp still, so I opted to use my heat gun to solve the problem, and not long after the floor was ready for sealing. Removing all excess moisture before sealing is essential as it can cloud the sealer and damage its ability to protect the tiles.

For sealing, I used four coats of Tile Doctor Seal & Go Extra sealer. This is a special acrylic-based formula which allows moisture vapour transmission making it fully breathable and ideal for situations where no damp proof membrane has been installed and where mineral salt deposits (efflorescence) are more likely to occur which is not uncommon with these old floors. As well as enhancing the appearance of the floor the sealer will provide a layer of protection to the surface of the tiles and prevent dirt and stains from becoming ingrained in the pores.

Victorian Floor Dated 1929 After Cleaning and Sealing

The results of the restoration were fantastic – in fact, if you had seen the restored the floor for the first time, you might have thought it was only recently installed! As you can see from the Before and After photos, the floor was completely transformed, from a dull, dirty and worn condition to looking almost brand new.

The customer was very happy with the work and no doubt will be much looking forward to showing off her new floor!
 
 
Source: Victorian Tile Cleaning and Restoration Service in Derbyshire

Maintaining Victorian Floor Tiles

This Victorian tiled floor at a house in Fulham was in an absolutely horrendous state. As you can see from the first photograph, the tiles were caked in layer upon layer of muck, including paint and glue stains. This was due to the floor being unknowingly hidden for many, many years under carpet.

Victorian Tiled Hallway Before Restoration Fulham
Needless to say, the property owner was desperate to remedy get the fantastic pattern floor back into good nick, and so contacted me for assistance. I travelled up to the property in the town of Fulham in South West London, which is famous for its football club, to survey the situation and begin the work. It was immediately clear that the thick layers of dirt and staining would need to be removed, before being treated to a new seal to provide long-lasting protection.

Victorian Tiled Hallway Before Restoration Fulham

Cleaning a Heavily Soiled Victorian Tiled a Floor

My product of choice for removing the extremely heavy soil buildup on the tiles was Tile Doctor NanoTech HBU (formerly UltraClean), a powerful solvent-based cream cleaner. What makes this product different from standard cleaners is its use of nano-sized cleaning particles to penetrate below tough stains, dissolve them, and lift them to the surface. NanoTech HBU is a highly versatile product which can be used on most types of natural stone floor, both polished and unpolished.

I laid down the NanoTech HBU and left it to dwell for a short period on the tiles, allowing it to begin eating through the dirt, before using a scraper in combination with a steamer to manually lift the muck away from the tiles. Next, to tackle the glue and paint marks, I applied Tile Doctor Remove and Go, a stripper specifically designed to break down adhesive and solvent stains, and then used a scraper and a scouring pad to manually remove the glue and paint in the affected areas.

Once this was done, I scrubbed in some more NanoTech HBU to dissolve any remaining muck before rinsing the area thoroughly with clean water. To complete the cleaning process, I laid some down some Tile Doctor Acid Gel, which is a blend of Phosphoric and Hydrochloric acids in gel form, to eliminate inherent grout haze and alkaline mineral deposits in the affected areas. I then left this to dwell for ten minutes before giving the floor a final rinse to remove any chemicals and soiled residue. The floor was left for a week to dry out before I returned to seal it.

Sealing a Victorian Tiled Floor

With these fantastic Victorian tiles now muck-free, I proceeded to seal the floor. I initially applied a single coat of Tile Doctor Colour Grow, which is an impregnating, colour-enhancing sealer that really brings out the colourful features of patterned Victorian tiled floors like this one.

Victorian Tiled Hallway After Restoration Fulham
Once this initial coat of sealant had dried in, I asked the customer which kind of finish she preferred for the floor. She decided on a sheen finish, and so I laid down an extra five layers of Colour Grow to ensure the desired appearance, as well as to guarantee durable surface protection against dirt, stains and spillages.

Victorian Tiled Hallway After Restoration Fulham
The customer was really pleased with the results of the restoration, and left the following feedback:

“Bill worked extremely hard to clean and seal our hall tiles. Everyone is amazed at how good they look. We are extremely pleased with the results.”

Victorian Tiled Hallway Before and After Restoration Fulham
Another great Victorian tiled floor brought back to life, and and satisfied customer!

Source: Victorian Tile and Stone Cleaning and Sealing Service in South London

Restoring a Victorian Tiled Hallway Hidden under Carpet

It’s always a great surprise to find old tiled flooring hidden underneath carpet or linoleum which appears especially common with 19th century properties where it’s not unusual for the owners to uncover fantastically patterned, original Victorian tiled floors and, naturally, they want to restore them to their former glory. If you have a property of this type you might want to look under the carpets.

The majority of the time, however, these tiles have been covered up for decades, allowing for thick layers of muck to build-up and are invariably damaged carpet grippers, surface glue and adhesive tape.

This was pretty much the case with this customer who lives in the town of Warminster and was keen to have her own newly discovered Victorian hallway brought back to life, and called me down to see what could be done. Upon arrival at the property, I determined that the tiles would definitely require a very deep clean, including the remove of numerous glue stains, followed by the application of a new seal.

Victorian Floor Found Under Carpet Before Restoration in Warminster

Cleaning a Very Dirty Victorian Tiled Hallway

Before I could begin the deep cleaning process, I needed to remove the carpet grippers and surface glue, attempting to remove as much as possible by hand using a scraper.

For the particularly stubborn areas, I applied Tile Doctor Remove & Go, a powerful stripper specially designed to break down adhesives and solvents, and left it to dwell for 20 minutes to eat through the glue deposits. I then attached a black pad to a rotary machine and scrubbed the area thoroughly to clean the affected areas, before removing the resulting slurry using a wet vacuum and rinsed with clean water.

Once I was satisfied that all of the glue had been removed, I proceeded to soak the floor using a solution of the high alkaline cleaner known as Tile Doctor Pro Clean. This is a versatile product that can be used on a wide range of natural stone floors to deal with heavy soil build-up.

I left the Pro-Clean to dwell for ten minutes, and then scrubbed it into the tiles to remove the ingrained dirt and also to break down any old and ineffectual seals. The floor was then once again rinsed thoroughly with clean water which was then extracted using a wet vacuum before being left to dry for a couple of days.

Sealing a Victorian Tiled Hallway

Upon our return to the property I immediately tested the floor for damp using a damp meter. This is an extremely important test to carry out before sealing any kind of tiled flooring, due to the fact that excess moisture left over from cleaning can cloud the sealer and damage its ability to protect against dirt and stains.

Thankfully, the damp test revealed no excess moisture, and I was able to proceed with sealing the tiles. My choice of sealer was Tile Doctor Seal and Go, a water-based topical sealer that simultaneously provides both a stain resistant surface seal and a durable and aesthetically pleasing low sheen finish, also being water based it doesn’t give off a smell as it dries.

Victorian Floor Found Under Carpet After Restoration in Warminster

This is a very cost effective product that is highly suitable for use on Victorian and Quarry tiles, I applied five costs to achieve the desired finish.

The customer was very pleased with the final results. It’s always satisfying to restore original Victorian tiled floors to looking their best once again – and this one was no exception.
 
 
Source: Victorian Tile and Stone Restoration Service in Wiltshire

Rebuilding and Restoring a Victorian Tiled Hallway

As you can see from the photographs below this Victorian tiled hallway was in quite a state and not only needed a thorough clean and fresh seal but needed to be rebuilt in parts.

Victorian Tiled Floor During Rebuild Leamington Spa

Leamington Spa or Royal Leamington Spa to give its full name is one of the original UK Spa towns where people would visit to bathe the waters which are supposed to have medicinal properties, the town has many regency period properties and so Victorian floors

Rebuilding and Cleaning a Victorian Tiled Hallway

A good 30% of the floor tiles were lose and it took three days to rebuild the screed levelling compound before refitting loose tiles and new ones had to be cut to size, fixed in place and then re-grouted.

Victorian Tiled Floor During Rebuild Leamington Spa

On day 4 a 400 grit coarse burnishing pad was applied to clean up the whole floor.
This was followed by scrubbing the tile and grout with Tile Doctor Pro-clean mixed 50/50 with NanoTech HBU remover followed by Remove and Go and finally treated with Acid Gel to remove the grout haze. After that the White tiles were steam cleaned to get them as clean and white as possible.

Victorian Tiled Floor During Rebuild Leamington Spa

The floor was thoroughly rinsed after each treatment and the slurry extracted using a wet vacuum.

Victorian Tiled Floor During Rebuild Leamington Spa

Sealing Victorian floor tiles

I left the floor for 5 days so it could thoroughly dry out and settle following the numerous treatments and then came back to seal the tiles, I used a damp test meter first to verify the floor was dry and ready for sealing. Once happy I proceed to apply a couple of coats of Tile Doctor Colour Grow which is a colour enhancing sealer that soaks into the tile protecting it from within and leaves a matt finish.

Victorian Tiled Floor After Rebuild Leamington Spa

A lot of work went into restoring this floor but I’m really pleased with the way it came out and as you can imagine the owner was really happy with the transformation that had taken place in their house.

Victorian Tiled Floor After Rebuild Leamington Spa

 
 
Source: Victorian Tile and Stone Maintenance Service in Warwickshire

Damaged Victorian Hallway Restored in Cardiff

Pontcanna is a popular residential area in the western district of Cardiff, in South East Wales. Known for its rather large houses and spectacular foliage, interestingly enough roughly a quarter of the population are English folk.

I was called down to a property in the area to take a look at a Victorian tiled floor which was in quite poor condition. Along with the typical amount of dirt and muck seen on poorly maintained tiles, there were a number of missing tiles and a fair bit of cement caked on the surface of the floor.

Victorian Tiled Floor Restoration Pontcanna

It would require a robust clean, fresh seal, and several repairs to get this floor back into optimum condition.

Cleaning and Repairing a Dirty Victorian Tiled Floor

To begin, I checked for excess moisture problems using a damp meter in various places of the hallway floor and, thankfully, it was showing dry results. Any dampness could have potentially caused problems later on in the restoration process, so it was s good idea to run tests before starting.

Next, I manually scraped as much of the dry paint and cement off the tiles as possible, with no lubrication necessary. I then proceeded to clean the floor with a solution I mixed early, consisting of equal parts Tile Doctor NanoTech HBU and Tile Doctor Pro Clean, rinsing as I went. Both products are designed to tackle heavy soil build-up, with the former uniquely using nano-sized particles (as the product name suggests) to penetrate deep into difficult to reach areas in the tiles in order to lift out ingrained muck.

Following the initial clean, I removed all of the loose tiles and those heavily affected by cement, before retiling as necessary with fresh Victorian tiles, and grouting the whole floor. Of course, these replacement tiles were carefully sourced to ensure consistency, as far as possible, with the original pattern of the floor.

Victorian Tiled Floor Restoration Pontcanna

The next day, I went over the whole floor with an application of the acid-based Tile Doctor Grout Clean Up, diluted with a little alkaline Pro Clean to form a cleaning solution. I then used a black pad to scrub the cleaner into the tiles, similarly to the previous day’s cleaning. This was followed by a through rinse with water to neutralise the floor.

It was at this point that I noticed some stubborn cement stains remained so I set about breaking them down using a 60 grade hand held diamond polishing block, and this technique proved successful.

Sealing a Victorian Tiled Floor

After completing the clean, I left the floor to dry out for roughly 24 hours. Upon my return to the property to seal the tiles, I tested again for moisture. It is recommended to run damp tests before sealing, as excess moisture can cloud the sealer, affecting its performance in the long run.

Victorian Tiled Floor Restoration Pontcanna

Fortunately, no dampness was detected and I was proceeded to seal the floor with seven coats of Tile Doctor Seal & Go, which enhances the natural colours in the stone and provides a nice satin gloss appearance, as requested by the customer.

Victorian Tiled Floor Restoration Pontcanna

I was extremely pleased with the results of this restoration, as was the customer. The extent of the soil build up and damage was such before the restoration that, after completion, the floor looked like it had been newly laid!
 
 
Source: Victorian Tile and Stone Cleaning and Restoration Service in South Wales