Cleaning and Sealing a Victorian Tiled Hallway in Girton, Cambridge

Posted on April 12, 2019 by AbzDominise

The owner of this Victorian tiled hallway floor at a house in the village of Girton was unhappy with its condition and asked if we could call round and quote for having it deep cleaned and resealed. Girton is just north of Cambridge and only about six miles from our base so it wasn’t long before I was able to call in and survey the floor.

Victorian Tiled Hallway Before Cleaning Girton

The floor was comprised of a combination of Red, Black and Cream tiles laid in a diamond pattern. The tiles were in good physical condition and I understand from the owner that it had been last cleaned and sealed about two years prior. Unfortunately, the sealer had now faded and had allowed dirt to become trapped in the pores of the tile giving it a grubby appearance that was difficult to clean effectively. The owner had two large dogs which I suspect contributed to the premature degradation of the sealer.

I surveyed the floor, created a quote which was accepted and then agreed a date to return and renovate the floor.

Repairing a Victorian Tiled Hallway Floor

On my return I started by taping up the skirting boards and other woodwork with protective tape. Once that was done, I gave the tiles a soak in a medium dilution of Tile Doctor Remove and Go which was allowed to dwell for ten minutes before being scrubbed in using a black scrubbing pad fitted to a rotary floor buffer. Remove and Go is a coatings remover which cleans the tiles and removes any remaining sealer.

The soil generated was extracted off the floor using a wet vacuum and the tiles inspected. The tiles had responded well to the cleaning process and after spot treating a few areas with a repeat of the previous process it was ready for the next stage which was to give the floor an acid wash.

I had noticed there was a slight build-up of efflorescence along one of the walls which isn’t unusual on these old floors where no damp proof membrane has been installed under the floor. It’s caused by moisture rising through the tile and depositing white salt staining on the surface as it evaporates. To resolve this, we neutralise the salts by giving the floor a quick rinse in a dilution of Grout Clean-up.

The Grout Clean-Up rinsed off the floor with water and extracted with the wet vacuum which was employed to get the floor as dry as possible before leaving for the evening.

Sealing Victorian Hallway Tiles

The floor was left to dry off fully overnight and I returned the next day, unfortunately after checking the moisture levels I found it needed more drying time, so I agreed to come back the next day.

The moisture levels were fine on day three, so I applied multiple coats of Tile Doctor Seal and Go. Seal and Go is a water-based product so you don’t get left with a smell as it dries. As well as protecting the tiles the sealer also adds a nice subtle sheen that works well on Victorian Tiles and has put new life into the tiled hallway.

Victorian Tiled Hallway After Cleaning Girton

Seal and Go is a breathable sealer so it will allow moisture to rise up through the tiles however had the efflorescence problem had been worse I would have used a different sealer. On this occasion however the problem appeared to be historical rather than recent.

My client was very happy with the transformation and left the following feedback.

“We are delighted with our Victorian tiled hall floor after treatment by Tom from Tile Doctor. A very professional service. Good communication throughout, and dedication to ensuring our full satisfaction; not a ways obvious when dealing with old tiles with different levels of porosity! Thank You!”

Source: Victorian Tile Cleaning and Sealing Service in Girton, Cambridge

Full Restoration of a Victorian Manor House Floor in Lancashire

Posted on March 11, 2019 by AbzDominise

Earlier this year we had the privilege to be involved in the restoration of a large Victorian tiled hall at Stone Cross Manor in Ulverston which is being sympathetically redeveloped into nineteen apartments by Persimmon Homes at a reported cost of £4 million. The magnificent Grade II-listed stately home was built in 1874 for Myles Kennedy who was a Limestone Quarry owner and chairman of an Ironworks.

The property continued to be occupied by the Kennedy family until 1943 when it was requisitioned by the military who then sold it to Lancashire County Council in 1946. The council used it as a boarding school for some decades and allegedly had the central oak staircase removed so the hall could be used to play indoor football. Since that time, it has had different owners and states of disrepair until finally being acquired by Persimmon who contacted us to quote for restoring the floor to its former glory. This would be no easy task and would require plenty of help. However, we are a resourceful bunch and being part of a large network of Tile Doctors means we were able to draft in other Tile Doctors to assist.

Before we took the job on, I went over to survey the floor and was immediately taken aback by the sheer size and scale of the project. The impressive Victorian hall has now had its large wooden staircase rebuilt and this sits in the centre of a series of architectural stone columns.

The floor was in a sorry state though and it certainly had a story to tell. At some point in its long history sections of the beautiful Victorian tiles had been cut out for the installation of central heating and then back filled with cement. There were also other areas that had been given the same treatment for some inexplicable reason. I suspect that the floor must have been covered in carpet during its later life to hide the mess.

Victorian Tiled Stone Cross Manor Hall Before Restoration

The biggest problem was the realisation that with so many tiles missing the only way we could get exact duplicates would be to have them made by a company such as Craven and Dunhill. They are specialist tile manufacturer who date back to 1872 and can reproduce old tiles using the same tones and colours to match the originals. This was a high spec job, so this was the right approach however the price for the moulds and the time needed to manufacture threatened to push the cost of renovating the floor off the scale.

We discussed this with the developer and manged to come to a compromise by reusing tiles from another room in the property. Many of the tiles in that room had been damaged and were beyond restoration however there were enough tiles in good condition to fulfil our requirements in the main hall. They would have to be carefully lifted and cleaned but the tiles matched the colour and tone, size and texture to the main hallway perfectly. When you look at the before and after pictures on this page you will really struggle to see any difference and this is rare on old floor like this, the only exception being the black tiles underneath the radiators where a matching tone wasn’t available.

Rebuilding a Large Victorian Tiled Floor

The first week was spent lifting and replacing broken tiles, it was a large floor area of about 120m2 which was set to be the main showpiece of the building, so it had to be right. As part of the floor prep it was also necessary to level parts of the floor with the application of a a self-levelling compound. We brought in Cardiff Tile Doctor Julian Iaconno to run this part of the job, he is an absolute master tiler and one of the best Victorian Tile installers in the country. At one point there was three of us working on the floor in order to keep to schedule.

Victorian Tiled Stone Cross Manor Hall During Restoration

Deep Cleaning a Large Victorian Tiled Floor

The second week was spent cleaning the floor various Diamond burnishing pads, moving though increasingly finer girts until we achieved the desired finish. We also used a lot of Tile Doctor Grout Clean-up and Pro-clean to remove the old grout and dirt from the recycled tiles. As is always the case on a building site you get a lot of tradesmen who like to have a look at what we have done and walk all over our nice clean tiles, thus leaving dusty footprints everywhere. I must give credit to the Site Foreman for keeping these guys out although best intentioned they weren’t helping with the cleaning process, so all doors were locked off and access was limited to the site foreman and Tile Doctor only.

Sealing a Large Victorian Tiled Floor

Victorian Tiled Floor Stone Cross Manor Hall After Restoration

We applied a Matt finish sealer called Colour Grow, which copes very well with potential damp issues that can cause problems with old floors with no damp proof course, it’s also excellent at bringing out the colour of Tiles whether Clay or Stone. Four coats of Colour Grow were applied to the Victorian tiles and being such a large floor area, it took a few days to fully seal the floor.

Victorian Tiled Stone Cross Manor Hall After Restoration

We cannot praise Persimmon enough for the dedication they have shown in the restoration of this historic property which has had a chequered past and will now have a long future.

Source: Victorian Listed Building Floor Restoration Service in Lancashire

Old Tiled Hallway Restored at Victorian House in Erdington, Birmingham

Posted on December 10, 2018 by AbzDominise

This customer from the Birmingham suburb of Erdington contacted me about an old tiled floor they had discovered in the hallway of their Victorian house whilst doing some renovation work. The tiles were in quite a state with ingrained dirt, adhesive, paint and some tiles were loose and cracked. The floor was so bad they were considering scrapping it and contacted Tile Doctor as a last resort just in case we could do something with it.

Victorian Tiled Hallway Before Restoration Erdington

I went over to take a look and could see that as well as the problems reported to me over the phone that the tiles were also imprinted with what appeared to be the pattern of the underlay that must have covered the floor previously. Curiously there were some tiles by the front door which had what appeared to be holes drilled into them. There was also a porch area in front of the main entrance that needed renovating.

Victorian Tiled Porch Before Restoration Erdington

However, I have in fact seen floors in worse state that this one and was confident I could restore it. I worked out a quote for doing the work which was accepted, and the job was booked in for a future date.

Cleaning Original Victorian Tiles

My first task was to carefully scrape off as much of the paint and adhesive as possible using a sharp knife. Then it was cleaned with a 200-grit diamond pad fitted to a weighted rotary machine, this gets into the pores of the tiles which hang on to the dirt and loosens the grime and dirt, it also helps to grind off the pattern left by the rubber underlay. The pads struggle to get into the edges of the floor so that was cleaned by hand with diamond blocks. Once I was happy the floor the soil was rinsed off with water and then extracted with a wet vacuum.

Victorian Tiled Hallway During Restoration Erdington

Next, I gave the floor an acid rinse with Tile Doctor Grout Clean-up scrubbed in with a 200-grit diamond pad again. This helped remove more dirt as well as helping to neutralize salt and mineral issues that may be present in the floor. This can be a big problem with old floors due to the lack of a damp proof membrane.

After rinsing and extracting again, I dried the floor off and went about resetting loose tiles and replacing some with replica tiles. These were grouted in along with other areas where the grout was loose and need of re-grouting.

Sealing Original Victorian Tiles

I left the floor to dry out thorough for a couple of day and then returned to seal the tiles first checking with a moisture meter that the floor was dry. We always ensure that floors are completely dry before sealing them as excess moisture can damage the performance of the sealer.

I found no evidence of dampness in the floor, so it was sealed with multiple coats of Tile Doctor Seal and Go which will add protection and works really well on old Victorian tiles where it adds a nice subtle sheen appearance. Also, being water based it doesn’t leave a smell as it dries. For the porch area which was partly open to the elements I used Tile Doctor Seal and Go Extra which is a fully breathable sealer that will cope well with the damp conditions.

Victorian Tiled Hallway After Restoration Erdington

The floor was unrecognisable from before and the customer was very happy with the transformation. Before leaving I left the customer with a bottle of Neutral pH tile cleaner that they can use going forward to help maintain the tiles appearance.

Victorian Tiled Porch After Restoration Erdington

Source: Victorian Tile Cleaning and Restoration Service in Erdington, Surrey

Repair and Restoration of a Victorian Tiled Hallway in Great Paxton, Cambridgeshire

Posted on October 29, 2018 by AbzDominise

I was called out to a house in the Village of Great Paxton to quote for deep cleaning a sealing a Victorian tiled hallway floor, there was also a triangular cemented section at the bottom of the stairs that the owner wanted retiling to match.

Victorian Tiled Hallway Before Restoration Great Paxton

Victorian Tiled Hallway Before Cleaning and Repair Great Paxton

Fortunately, the owner had discovered some spare tiles in the under-stair cupboard that would do the job; were not sure why this triangular section had been cemented in at some point in the past, but I was happy that the spare tiles would be enough to cover. My quote was accepted, and it wasn’t long before I was able to return to carry out the renovation.

Repairing a Victorian Tiled Hallway Floor

I started by taping up the skirting boars and other woodwork with protective tape. Once that was done I removed the triangular section of cement at the foot of the stairs. I noticed that the sub floor consisted of rubble and sand so once removed I was able to lay a section of a damp prof membrane and then back filled with self-levelling compound.

Victorian Tiled Hallway During Cleaning and Repair Great Paxton

Once the levelling compound had dried I laid the tiles that the owner had found under the stairs continuing the black and red diamond pattern. I used a quick setting adhesive which enabled me to grout the tiles in before leaving for the day and leave it to set overnight.

Deep Cleaning a Victorian Tiled Hallway Floor

Day two was begun by inspecting the previous day’s work to make sure all was well with the tiling and then continuing the restoration of the floor. In general, the tiles were dirty and had white paint splashed from decorating and so were now looking dull and faded. To remove the ingrained dirt, I gave the tiles a soak in a medium dilution of Tile Doctor Remove and Go which was scrubbed in using a black scrubbing pad fitted to a rotary floor buffer. This process did a good job of removing the dirt and softened the paint splashes which I was then able to carefully scrape off.

After rinsing the floor with water and extracting the soil with a wet vacuum I could see the tiles were much cleaner but needed more work to get the replacement section to blend better with the existing. To resolve this, I honed the surface of the tiles with a 100-grit and then 200-grit pad rinsing with water and extracting after each pad.

Sealing Victorian Hallway Tiles

The floor was left to dry off fully overnight and I returned the next day to apply a sealer that would add colour and protect the tiles going forward. Multiple coats of Tile Doctor Seal and Go were applied which a water-based product that adds a nice subtle sheen to the floor which works well on Victorian Tiles and put new life into the tiles.

Victorian Tiled Hallway After Restoration Great Paxton

Victorian Tiled Hallway After Cleaning and Repair Great Paxton

My customer was very happy with the transformation and left the following feedback.

“We are very pleased with the restoration of our Victorian tiles in the hallway. We are also very pleased with the service and quality of the works carried out.”

Source: Victorian Tile Repair and Restoration Service in Great Paxton, Cambridgeshire

Classic but Neglected Victorian Tiled Hallway Restored in Norwich Norfolk

Posted on January 26, 2018 by AbzDominise

There are thousands of Victorian tiled hallways in and around Norwich and I often get called to work on them, however this was a particularly abused and neglected example I thought you might find interesting. The surface had clearly been both painted red at some point (possibly with an old lead-based paint) and then completely covered with rubber-backed underlay and carpeted, a thick layer of double-sided carpet tape remaining firmly stuck in patches around all the edges of the floor area.

Victorian Hallway Floor Tiles Before Cleaning Norwich

Cleaning a Victorian tiled floor

Firstly, we cleaned the whole area using a strong solution (1:3) of Tile Doctor Pro-Clean, which is a high alkaline stripper and cleaner, agitated with a black scrubbing pad fitted to a rotary machine. All products and slurry were then power rinsed and vacuumed away to reveal the improved floor.

There were still a significant number of glue patches and paint spots around the edges of the floor, so these were tackled using Tile Doctor Remove & Go, which softened them enough to enable us to remove them with a sharp-bladed scraper.

Unfortunately, the decaying rubber underlay had left a pattern on the tile surface which was most obvious at the doorway into the terracotta tiled kitchen. We almost completely removed this using Tile Doctor Oxy-Gel which being in gel form allows it work on the problem area longer. It was painted on a brush and kept moist for two hours under a layer of cling film which drew out virtually all the contaminant from the tile.

The next concern was that an original Victorian floor of this age would almost certainly have no damp proof membrane and an area near the front door which showed evidence of efflorescence salts was treated with Tile Doctor Acid Gel in order to remove the white deposits and further inhibit the production of more in the future.

The whole area was then lightly buffed using the rotary machine and a 1500 grit diamond pad with water in order to remove any remaining fine paint spots and restore a silky feel to the surface of the tiles before leaving the floor to dry overnight with assistance from our dehumidifier.

Sealing a Victorian tiled floor

When we returned the following morning, our damp meter showed us that the moisture content in the substrate was probably going to be too high to allow us to use an acrylic sealer to provide the sheen which the client had requested; so we decided to spray-buff the floor using a 3000 grit diamond pad on the rotary machine followed by the application of Tile Doctor Colour Grow, a colour enhancing penetrating sealer which sits just below the surface of the tile and leaves no visible finish. Finally, the whole floor was spray buffed to a low sheen with a white maintenance pad on the rotary machine and any resulting dust vacuumed away.

Victorian Hallway Floor Tiles After Cleaning Norwich

The Victorian tiles now look fantastic and have become a great asset to the property as original features like these are very sought after.

Source: Victorian Tile Cleaning and Restoration Service in Norwich, Norfolk

Challenging Bitumen Stained Victorian Floor Restored in Lancashire

Posted on September 14, 2017 by AbzDominise

This old Victorian tiled Hallway floor, laid in a geometric pattern, at a house in Barrow in Furness was a challenging project. The tiles were extremely dirty and also stained with Black Bitumen which has been used as an adhesive, however we have come across these sorts of problems before and so I was confident it could be resolved.

Geometric floor before Restoration Barrow in Furness

Deep Cleaning an Old Victorian Tiled Floor

I roped in Heidi and my son Lewis who spent a whole day cleaning with chemicals, steam, buffing pads and unfortunately the results were far from satisfactory; the customer wasn’t happy and Heidi wasn’t happy with it either. It was clear that the black bitumen had penetrated deep into the pores of the clay and becoming so embedded that no chemical or technique we were using would shift it fully.

To top it off I had gone out earlier to tile the old mat well with matching tiles before we started the cleaning but due to the depth of the floor matt. The matt well was at least 35mm so it was clear I couldn’t use standard floor adhesive. I opted instead for a sand cement mix, similar to what the Victorians would have used originally. This filled up the depth and allowed me to tile and grout the same day, however overnight there was a bit of shrinkage and some of the new tiles settled unevenly.

Geometric floor before Milling Barrow in Furness

I racked my head for a solution to both issues and decided the best course of action would be to Mill the clay tiles to remove the Bitumen and smooth down the uneven effect of my tiling. This is not something we would normally do on a clay tile as this system can leave scratches which potentially would look worse that the dirt. After I had milled the Tiles down with a course pad fitted to a heavy buffing machine and removed all the issues I then counteracted any scratches left over using a higher grit milling pad. This solution fully resolved both issues leaving it ready for the final step of sealing.

Geometric floor After Milling Barrow in Furness

Sealing an Original Victorian Tiled Floor

The floor was left to dry off overnight and we returned the next day to seal the tiles using Tile Doctor Colour Grow, which is a matt finish, fully breathable and colour enhancing sealer which really lifts the colour of the stone or in this case clay tile. Colour Grow is impregnating – meaning that it penetrates the pores of the stone to fill them and prevent trapped dirt and stains. We recommend Colour Grow for both internal and external applications and especially for areas where no damp proof membrane is evident, since the sealer allows for the floor to breathe moisture.

Geometric floor After Restoration Barrow in Furness

There were plenty of problems to overcome and It took a lot of work but I’m pleased to say the floor was transformed by our efforts and now looks fantastic and I’m sure has added a lot of value to this period property.

Source: Victorian Cleaning and Renovation Service in Lancashire

Deep Cleaning a Victorian Tiled Floor in Lancashire

Posted on September 7, 2017 by AbzDominise

We often get asked to do a combination of jobs at Tile Doctor so we have to be prepared for the unexpected, like getting asked to clean an old Sandstone fireplace whilst your cleaning a Victorian tiled floor at a house in Preston. We normally charge extra for these types of jobs but it depends how much cleaning is required.

Red and Black Victorian Tiles Preston Before Cleaning

This Fireplace had been in use for a number of years and due to its grainy texture was hard to keep clean, dirt and soot had built up on its surface and there was no sealer visible, either that or it had worn off with the heat.

Sandstone Fireplace Preston Before Cleaning

Cleaning and Sealing a Sandstone Fireplace

To clean the uprights and Hearth I applied Tile Doctor Oxy-Gel which being in Gel form and not a liquid, stays in place increasing dwell times and doesn’t drip where it shouldn’t. In this case I let it soak into the stone for about forty minutes before scrubbing it in with a stiff hand brush and steam. Some marks were still visible after this process so we opted for using handheld Diamond blocks in 50.100.200 and then 400 grit to grind off the staining and restore the surface finish. Using these small handheld blocks takes off some of the heavier texture as well as cleaning the stone at the same time, but is really useful to use where chemicals alone struggle to get the results required. Once fully clean the fireplace was rinsed with water a couple of times and the slurry removed using a wet vacuum. After speed drying the stone with a heat gun it was ready for a couple of coats of Tile Doctor Colour Grow, even we were impressed with the results.

Sandstone Fireplace Preston After Cleaning

Cleaning and Sealing a Victorian Tiled Floor

The Red and Black Victorian Tiles were cleaned with a strong dilution of Tile Doctor Pro-Clean which is very similar to Oxy-Gel only in a liquid form. The product was left to soak into the tiles for about ten minutes before being scrubbed in with a black buffing pad attached to a slow speed buffing machine. I used the wet vacuum again to soak up the residue and stubborn stains were retreated until I was satisfied.

Old Victorian floors rarely have a damp proof membrane installed and so it’s not uncommon for damp to rise-up through the ground and tile resulting in white salt deposits being left on the surface. To prevent this process, which is commonly referred to as Efflorescence, Tile Doctor Acid Gel was applied. The solution is scrubbed into the tiles and then rinsed off with clean water and removed with a wet vacuum ready for sealing.

Victorian Tiles can take a while to dry and in this case I left it two days before returning to apply a breathable sealer to protect the tiles from ingrained dirt and staining. In this case a couple of coats of Tile Doctor Colour Grow were applied. If you recall this was the same sealer we used on the fireplace as the customer wished to bring out the colour and have a Matt finish.

Red and Black Victorian Tiles Preston After Cleaning

Source: Victorian Floor Tile Cleaning and Renovation Service in Lancashire

Large Victorian Hallway Deep Cleaned and Sealed near Daventy

Posted on March 30, 2017 by AbzDominise

The pictures below were taken of a Victorian tiled hallway floor in a large property in the old village of West Haddon. The tiles were in good physical condition for its age but required attention as it was looking very dull and dirty due to not being sealed for many years allowing a build-up of soil to embed in the surface of the tiles making cleaning very difficult.

Victorian Tiled Floor Before Cleaning West Haddon

Deep Cleaning a Victorian tiled hallway floor

My first course of action was to vacuum the floor to remove light dust and debris, this was followed by applying Tile Doctor Pro-Clean diluted with warm water spraying several metres at a time. The solution was allowed to soak in for a short while before being agitated with a rotary machine fitted to a rotary machine and a stiff grout brush which was run along the grout lines. The section of floor was then rinsed with water and then this was extracted with a wet pick up machine. This process was then repeated through the entire area.

I then switched to a new cleaning process for Victorian tiles that was taught on a recent Tile Doctor training course. Basically it involves using a special diamond impregnated burnishing pad fitted to a rotary machine to resurface the tiles using just water. Again I worked in small sections until I had covered the entire area.

A common issue with these old Victorian floors is they were usually laid without a damp proof course; as a result it’s not uncommon for white salt deposits (efflorescence) to appear a few days after cleaning. To counteract this I gave the floor an acid wash using Tile Doctor Acid Gel, leaving it to dwell before rinsing. This helps neutralise the tile and will combat any salts rising up through the floor later.

Sealing a Victorian tiled hallway floor

I returned the following day to carry out repairs and to re set a couple of loose tiles which is not unusual for a floor of this age. The floor was then left to dry for a further day with a dehumidifier on site before returning to seal the floor with a breathable sealer for which we used two coats of Tile Doctor Colour Grow.

Colour Grow does a really good job protecting tiles as it soaks into the pores of the tile enhancing its colours whilst protecting from within however it leaves a matt finish and the customer wanted a sheen finish. This would not be a problem to achieve however it would require the application of another product and I was still concerned about potential efflorescence issues which would be more difficult to resolve with the application of a further sealer so I agreed to return several weeks later to finish the job.

As agreed I returned a few weeks later which allowed the floor to dry and guard against any damp issues and on my return I was happy to confirm the floor had fully dried using my damp meter and further there were no signs of efflorescence. I then applied 5 coats of Tile Doctor Seal & Go to give the customer the required finish she was after.

Victorian Tiled Floor After Cleaning West Haddon

I also left the client a free sample of our cleaning solution Tile Doctor Neutral Clean together with written maintenance instructions to help keep the floor looking its best for years to come.

Source: Tile Cleaning and Restoration in Northamptonshire

Deep Cleaning Victorian Hallway Tiles in Middlesex

Posted on March 24, 2017 by AbzDominise

Apologies in advance but I forgot to take the usual before photograph of this Victorian tiled hallway in Twickenham that I worked on recently. It’s a shame really as it was certainly in need of a good clean and re-seal after years of inadequate maintenance and I’m sure a photo would have helped.

Victorian tiles are porous and do need a sealer to stop dirt becoming ingrained, as once that happens they can be difficult to clean and a Hallway is an especially high traffic area that will see a lot of dirt being tramped in. That activity also wears down the sealer over time so it’s important to keep it topped up.

Cleaning Victorian Tiles

On these tiles, we used a 50:50 combination of Tile Doctor Pro-Clean mixed with Tile Doctor Remove and Go. This combination of products works very well to break down old sealers and also to clean the general soil away from the tile. As usual it was left to soak into the tiles for ten minutes before using a heavy duty scrubbing machine to scrub the floor clean. This achieved a good result and the soil and products were then flushed away using our special flushing tool which fires a jet of water onto the tile whilst vacuuming at the same time (no mess!) to an external tank.

Sealing Victorian Tiles

After allowing the tiles to dry off overnight with some heating on, the floor was ready to accept a new seal the next day. Our customer decided to have a sheen finish so we opted to apply Tile Doctor Seal and Go. These tiles are very porous and so need seven coats to be applied to the floor before it was completely sealed.

Victorian Tiled Hallway After Cleaning in Twickenham

Apologies again for not taking a before photo so you can compare the difference however hopefully you can see how health the floor looks following the deep cleaning and application of a fresh sealer which will ensure future maintenance is a lot easier for the customer.

Source: Victorian Tile Cleaning and Sealing in Middlesex

Beautiful Victorian Floor Discovered Under Hallway Carpet

Posted on July 21, 2015 by AbzDominise

These photographs were taken at a large shared block of flats in the seaside town of Eastbourne. Recently a decision was made to replace the carpet in the entrance hallway and they discovered a lovely but damaged Victorian tiled floor underneath. A decision was made to restore the floor back to its former glory and we were asked to do the work.

Victorian Tiles Before Cleaning Eastbourne Flats Entrance Hall

Cleaning Victorian Tiles

The carpet had been stuck down with gaffer tape which is fortunate as sometimes a gripper rod is used with nails piercing the grout. To deep clean the heavy build-up of dirt from the tiles and remove the tape adhesive I applied a dilution of Tile Doctor Remove and Go combined 50/50 with Pro-Clean and left it to soak into the floor allowing it time to break down the glue. Over the course of the next two days the solution was scrubbed into the tiles, rinsed and then the soiled solution extracted and then re-applying until I was satisfied the floor was clean. It was a residential property and I couldn’t have anyone walking through the floor as I worked so I directed them up the fire exit. The kids really enjoyed the detour.

Sealing Victorian Tiles

Following 48hrs drying time I returned on what must have been the warmest day of the year to seal the floor with a shiny and hard wearing Tile Doctor sealer called Pro-Seal. Victorian tiles are quite porous so eight coats were required in the end.

Victorian Tiles After Cleaning Eastbourne Flats Entrance Hall

The final result was a huge improvement and the residents continually commented on the change of colours. The whites really shone and who knew there were blue tiles there?

Source: Professional Tile, Stone and Grout maintenance service in East-Sussex

Maintaining Victorian Tiled Hallways

Posted on June 29, 2015 by AbzDominise

These Victorian hallway tiles were cleaned at a residence in the historic town of Bideford. As you can see from the photograph below the tiles were dull and had lost their vitality due to ingrained dirt, clearly it had been some time since they were given a good deep clean.

Victorian Tiled Hallway floor in Bideford Before cleaning

Cleaning a Victorian Floor

The first job was to protect the skirting with tape and then vacuum to remove any loose debris and grit. The next step was to cover the entire floor with a strong dilution of Tile Doctor Remove and Go which is a powerful cleaning and coating remover that is safe to use on tile and stone. It was left to dwell on the floor for twenty minutes so it could soak into the tile and make the job of removing any remaining sealer and ingrained dirt easier.

The solution was scrubbed into the tile using a black scrubbing pad fitted to a rotary machine and then the soiled cleaning solution rinsed off using a wet vacuum. This process was repeated a number of times until I was satisfied with the condition of the floor and followed with a final rinse with clean water to remove any trace of cleaning product. The water was extracted with the wet vacuum to get the floor as dry as possible before leaving for the day.

Sealing a Victorian Floor Sealing

The tiles were left to dry for 24 hours and I came back to seal the tiles using eight to nine coats of Tile Doctor Seal and Go which is an ideal sealer for Victorian Tiles as it leaves a nice sheen and provides excellent stain protection.

Victorian Tiled Hallway floor in Bideford after cleaning and sealing

I think you will agree the hallway floor came up really well and now been given a new lease of life.

Source: Professional Tile, Stone and Grout maintenance service in Devon

Deep Cleaning, Sealing a Victorian floor

Posted on May 19, 2015 by AbzDominise

This Edwardian style floor had been installed in a house in Twickenham around five years prior. The floor had a number of damaged tiles which needed replacing and that it had not been professionally cleaned since being installed and the original sealer had either worn off or turned yellow.

Edwardian style tiled floor twickenham before cleaning

Cleaning Edwardian Style Tiles

Before cleaning the broken tiles, adjacent grout and tile adhesive was carefully chipped out of the floor using a hammer and chisel. Once this was done the floor was soaked with a dilution of Tile Doctor Pro-Clean which was applied with a mop and left it to dwell before being scrubbed into the tile using a rotary machine fitted with a scrubbing pad. The machine saves a lot of time however it struggles to get into the edges and corners and so it was necessary scrub those area by hand. The now soiled cleaning solution did a good job removing the dirt and old sealer and was washed away using fresh water and a wet vacuum. The tile and grout was inspected and the process repeated where required before giving the floor a final rinse to remove any trace of cleaning product. At this point the broken tiles were replaced with spares and grouted into place; the floor was then left for 48 hours so it could dry out thoroughly before sealing.

Edwardian style tiled floor twickenham after cleaning

Sealing Edwardian Style Tiles

On our return the floor was checked and then sealed with five coats of Tile Doctor Seal and Go which is a topical high sheen sealer highly recommended for these types of tiles that will enhances the look of the tile and creates a barrier against dirt and spillages.

Edwardian style tiled floor twickenham after sealing

As you can see from the picture, the floor has been restored to its original condition and with the correct maintenance; it should last for years to come.

Source: Professional Tile, Stone and Grout Cleaning service in South Middlesex

Refreshing a Victorian Tiled Hallway

Posted on April 17, 2015 by AbzDominise

Coalvile in the heart of the Midlands was a coal mining town and with that history has many period properties with traditional floors including the one in this post which has a Victorian tiled hallway. The tiles were in good physical condition for their age but were now looking faded and lifeless due to a build-up of ingrained dirt in the tile and were now overdue for a deep clean and re-seal.

Victorian Tiled Hallway Before Cleaning in Coalvile

Cleaning Victorian Hallway Tiles

Before I could seal the floor it would need to be stripped of any old coatings and in the process given a really good clean. To do this I applied a dilution of Tile Doctor Remove and Go and left it for to soak in to the tiles for about 15-20 minutes before scrubbing it in with a rotary buffing machine fitted with a black scrubbing pad.

Once the whole floor had been scrubbed it was washed down with water which was then removed using a wet vacuum. Stubborn areas were then re-treated and grout lines also scrubbed using more Remove and Go and a stiff brush. Last step of the cleaning process was to give the floor a thorough rinse with more water to remove any trace of cleaning product and then as much was as possible was extracted using the wet vacuum. I wanted to seal the floor the next day so it was important to get the floor as dry as possible.

Sealing Victorian Hallway Tiles

I returned the next day to seal the floor and the work I spent into getting it dry was well spent as the floor had dried fully overnight and I was able to seal the Victorian tiles with two coats of Colour Grow which is an impregnating sealer that enhances colour and occupies the pores in the tile so contaminates can’t become ingrained in there. Colour Grow also provided the matt finish the customer wanted.

Victorian Tiled Hallway After Cleaning in Coalvile

Source: Tile, Stone and Grout Cleaning in Leicestershire

Refreshing and Original Victorial Tiled Floor

Posted on April 6, 2014 by AbzDominise

I recently paid a visit to Windermere in the Lake District to clean and re-seal a Victorian Tiled hallway floor. The customer wanted the shine putting back on the Victorian tile and some tile grout had become loose and needed replacing.

Victorian Tiled Floor Windermere Before Cleaning

Cleaning Victorian Floor Tiles

On arrival I set up my tools and covered any areas that needed protecting against water. Once that was done I started to strip the floor of any remaining sealer using Tile Doctor Remove and Go which is a coatings and sealer remover product that is safe to use on tile, stone and grout. Working in small areas the product was scrubbed into the tile and then washed it off with water using a wet vacuum to remove the soiled solution. This process was repeated until the whole floor was clean, there were a few stubborn areas and for these I mixed the Remove and Go 50/50 with Nano Tech Ultra Clean which adds tiny abrasive particles into the solution to make a more effective product. The process of scrubbing the floor made me realise that the loose grout problem was greater than first thought and some tiles need re-laying so I decided to come back and do this the next day, before leaving however I gave the floor a thorough rinse to ensure any trace of cleaning product was removed.

Grouting Victorian Tile

The next day I arrived and fixed all the loose tiles, my preference is to use the Mapei range of tile adhesives and grout, in fact the grout comes in a range of colours which is very useful if your filling in holes in travertine etc. One the adhesive had gone off I began to grout them in including those areas where the grout was missing or become loose. The last step was to wash off the grout from the tile surface and making sure it was all tidy for the next day.

Victorian Tiled Floor Windermere During Cleaning

Sealing Quarry Floor Tiles

On the third day I returned to the house and after verifying the floor was dry with a damp tester and the grout had hardened I started sealing the floor with Tile Doctor Seal and Go putting on thin coats which took about twenty minutes to dry, in total seven coats were applied which gave the floor the nice shine the customer was after.

Victorian Tiled Floor Windermere After Cleaning

This job took me three days in total and after I had finished we discussed how to maintain the appearance and increase the longevity of the sealer by using a Neutral Cleaning product which unlike many acidic cleaners does not eat away at the sealer.

Source: Victorian Tile Restoration Services in Cumbria

Removing Carpet Glue from Victorian Floor Tiles

Posted on March 5, 2014 by AbzDominise

The following photos are from a Victorian tiled hallway floor at a residence in Kettering Northants which had been covered with carpet for the last thirty odd years; to make matters worse the carpet had been stuck down with adhesive which was proving very difficult to remove.

The customer phoned to see if it would be possible to restore the floor back to its former glory as it was very dirty and the colours were dull not to mention the glue. After a home visit and testing a small area to prove we could do the work, the customer booked us in to carry out the service before completing the decorating of the hallway. It’s always a good idea to have any heavy restoration work done before you decorate as heavy machinery is used and it can be a messy job.

Victorian floor in Kettering before cleaning 1

Victorian floor in Kettering before cleaning 2

Cleaning Victorian Tiles

To remove the glue and restore the tiles Tile Doctor Remove and Go was left to soak into the tile before being brushed in with a rotary machine fitted with a black scrubbing pad. This process also works to lift out the embedded dirt from the floor tile; once done the soiled solution was removed using a wet vacuum and the floor rinsed with clean water to remove the product from the tile.

To get the grout clean Tile Doctor Grout Clean-up was sprayed onto all the grout lines and then hand scrubbed in with stiff brushes; this was then followed by a second wash and rinse.

The hallway was still in general use so the floors were then sheeted up for three days to protect them whilst the floor tiles and grout were allowed to dry out assisted by a dehumidifier which we left on site.

Sealing Victorian Tiles

On our return we remove the sheeting and damp tested the tiles to make sure they had dried sufficiently; all was well so we sealed the floor by applying five coats of Tile Doctor High Shine as the customer had requested a high gloss finish in order to fully bring out the colours of the tiles.

Victorian floor in Kettering after cleaning 1

Victorian floor in Kettering after cleaning 2

I think you will agree from the photographs we have managed to achieve this, certainly the customer was very happy with the results.

Source: Stone and Tile Restoration in Northamptonshire

Cleaning Victorian Tiles at Grand Residence in Cambridge

Posted on February 21, 2014 by AbzDominise

These photographs are from a lovely old period property in the village of Harston near Cambridge which had an original Victorian Tiled floor installed throughout the hallway and stairwell. Considering its age the tiles were in a very good condition but they were looking dull and overdue for a deep clean and re-seal.

Victorian Tiled Floor Harston Hallway View Before Cleaning 1

Victorian Tiled Floor Harston Before Cleaning 2

Cleaning the Victorian Tiled Floor

Working in sections the first step was to protect the beautiful skirting boards with clear plastic fixed with decorator’s masking tape. This was followed by applying a dilution of Tile Doctor Pro-Clean and letting it soak into the tile for about 20 minutes before being agitated using a rotary machine fitted with a black scrubbing pad.

Victorian Tiled Floor Harston Skirting Protection 3

Victorian Tiled Floor Scrubbing Harston 4

This did a good job of cleaning the floor however there were some stubborn stains that needed further attention so more Pro-Clean was applied and worked in with a stiff hand brush as a steamer was used to help lift the dirt out of the pores in the tile. Once we were happy with the floor the soiled cleaning fluid was removed from the floor using a spinner tool which applies hot water under pressure effectively rinsing the floor whilst removing the water at the same time with suction.

Victorian Tiled Floor Harston Steam Cleaning 5

Victorian Tiled Floor Spinning and Steaming Harston 6

Sealing the Victorian Tiled Floor

The floor was left to dry assisted with air blowers before moving on to sealing with Tile Doctor Seal and Go which is a recommended sealer for Victorian floor tiles that provides on-going stain protection as well as adding a nice subtle shine to the floor.

Victorian Tiled Floor Harston After Cleaning and Sealing 7

Victorian Tiled Floor Harston Completed 8

The customer was really pleased with the results and even asked us back to do the slate tiles in the kitchen something I will no doubt write about in a later post.

Source: Victorian Tile Cleaning Services in Cambridge

Original Victorian Encaustic Tiled Floor Restored

Posted on February 9, 2014 by AbzDominise

I had an inquiry from a client in Fulham, who was representing the residents of an old building. The building had recently undergone redecoration and in the hallway, they had removed a thirty year old carpet to discover an original encaustic tiled floor underneath which turned out to be 102 years old.

Old Encaustic Floor Fulham Before Cleaning 1

Old Encaustic Floor Fulham Before Cleaning 2

As you can see from the photographs the floor was extremely dirty and covered in lots of glue and paint from the carpet and decorations. Naturally they were keen to have it restored and brought back to life. Given the condition of the tile and the age I to set their expectations and told them that although I was confident of making a big difference to the floor I couldn’t give any guarantees. I gave them my quotation and although it was slighter higher than what they had I mind, it was still less than other quotations that they had received and were also considering the option of replacing the carpet.

After a couple of days I received a call asking me to go ahead with the work and I booked it in.

Encaustic Tiled Floor Cleaning

My approach to the job was to initially spray a mixture of Tile Doctor Remove and Go combined with Tile Doctor NanoTech UltraClean which creates a powerful tile safe coatings remover with tiny abrasive particles that aid the cleaning process.

I left this to dwell on the tile for about fifteen minutes before scrubbing it in using a black scrubbing pad on my rotary machine. This approach removed some glue and a lot of old grime so I then sprayed down more Remove and Go and also used a steamer to loosen the remaining glue and paint. This process was repeated a section at a time until at the end of the day I gave the whole are a thorough rinse before packing away my equipment and leaving it to dry.

Encaustic Tiled Floor Sealing

I returned three days later and carried out a test with my moisture meter to make sure that the floor was dry enough to seal. The meter confirmed it was dry so I then sealed the floor using two coats of Tile Doctor Colour Grow which is an impregnating sealer that really brings out the colour in the tiles.

Old Encaustic Floor Fulham After Cleaning 3

Old Encaustic Floor Fulham After Cleaning 4

And as you can see the floor is transformed and now I have some happy residents who are really pleased that they opted to have the old floor cleaned instead of replacing the carpet. Not to mention that restoring such an original feature has probably added value to their investment as well.

Old Encaustic Floor Fulham Before and after Restoration 5

Source: Encaustic Tile Restoration Service in Surrey

Restoring Badly Stained Victorian Tile

Posted on December 23, 2013 by AbzDominise

This classic Victorian tiled floor in Kingswood Kitchen; Cheshire was quite dirty and in need of a deep clean. Cleaning this type of floor is bread and butter for a Tile Doctor and so I had every confidence we could clean in and then re-seal it without any complications.

Victorian Floor Kingswood Before Cleaning 006

Victorian Floor Kingswood Before Cleaning 005

Cleaning a Stained Victorian Floor

In order to tack the ingrained dirt and I decided the best course of action would be to cover the Victorian Floor tiles with a 50/50 mix of Tile Doctor Pro-Clean and Nano-Tech UltraClean and leave it to work on the tile allowing the cleaner to break down any remaining previous sealer and in-grained dirt.

Victorian Floor Kingswood During Cleaning 007

Victorian Floor Kingswood During Cleaning 008

After about 30 minutes I steam cleaned the whole area multiple times to lift the ingrained dirt and grime out of the floor and then give the floor a thorough rinse removing the soiled solution using a wet vacuum. The floor was quite damp at this stage and needs to be dry to seal so we left it to dry overnight, we also left behind a dehumidifier to assist with the drying process.

Sealing a Victorian Floor

The next day we came back and tested the floor using a damp meter to make sure it was dry. Once we were satisfied we sealed the tiles using five coats of Tile Doctor Seal and Go which is ideal for Victorian tiles as it leaves an attractive low sheen finish, it’s also a water based sealer so there is no smell.

Victorian Floor Kingswood After Cleaning 012

Victorian Floor Kingswood After Cleaning 013

Source: Victorian Tile Restoration in North Cheshire

Honest Muscle Required to Clean Victorian Tiles

Posted on December 11, 2013 by AbzDominise

Set of photographs here from a Victorian Tiled floor for a customer in Balham, South London. They had found the floor under an old carpet, and wanted to restore it. Unfortunately their builders did not listen and didn’t bother to put down any protection when they painted, as a result there was paint everywhere, I’ve include a detailed photograph below so you can see for yourself what a state the floor was in.

Victorian Tiled Floor Balham Before Cleaning

Cleaning the Victorian Floor Tiles

Initially the floor was cleaned using a dilution of Tile Doctor Pro-Clean mixed 50:50 with NanoTech UltraClean which had been left to dwell for 20 minutes before being agitated using a rotary machine fitted with a buffing pad. I used a wet vacuum to remove the dirty cleaning solution and then realising something more powerful would be required to shift the stubborn stains and paint marks. To rectify this I applied a Tile Doctor Remove and Go which is a coatings remover and left it to dwell on the Victorian tile for forty minutes before applying plenty of elbow grease. This did the trick to remove the paint and glue etc. so I worked across the floor in sections applying the same treatment until the floor was completely clean.

Once it had all been removed I gave the whole floor a scrub with Tile Doctor Grout Clean-Up and this brightened up the colours and finally I gave the floor a very thorough rinse with clean water to remove any remaining cleaning product that might have an adverse effect on the sealer. I left the floor to dry over the weekend and returned on the following Monday to seal it, but first I carried out a couple of repairs because some of the tiles were loose so I reset them in cement.

Sealing Victorian Tiled Floor tiles

On my return I sealed the floor using two coats of Tile Doctor Colour Grow which is a penetrating sealer that provides maximum stain protection whilst bringing out the colour in the stone.

Victorian Tiled Floor Balham After Cleaning

All the customer could say was AMAZING I didn’t think it was possible to get like this.

Source: Cleaning Victorian Floor Tiles in Surrey

Replacing Missing Victorian Tiles

Posted on December 8, 2013 by AbzDominise

This large entrance hall tiled in Victorian black and white floor tiles in London W2 had been quite badly damaged in the past by having a carpet glued and nailed on to it. Many tiles were broken or missing and those missing had been replaced by cement.

Cleaning a Victorian Floor

On the first day of this three day job I removed the cement filling and extracted the nails that remained in the floor. I then stabilised the exposed area with a PVA solution before replacing the missing tiles with replica or salvaged ones to match the floor was swept out and vacuumed to remove all loose debris.

On the second day I cleaned the floor, removing the old carpet glue with Tile Doctor “Remove and Go” which was left to dwell onto the tile for a while to allow it to soak into the tile and break down the adhesive; this was then removed with a wet vacuum. The next step was to clean the tiles using Tile Doctor Pro-Clean which was worked in with a black srubbing pad to scrub the cleaning solution into the tile and finish off the cleaning process, again the soiled solution was removed with a wet vacuum. Normally by now the floor would of have been clean however In this case the levels of soaked-in old glue and ground-in dirt from decades of use were such that the floor also required steaming, scraping and wire brushing with a Spid brass wire brush before a final clean with another round of Pro-Clean and a black buffing pad fitted to a Numatic buffing machine. This had the desired affect and the last step was to wash the floor down with clean water to remove any remaining chemicals etc.

Sealing a Victorian Floor Sealing

After leaving the floor to dry overnight I came back the third day to seal the floor using four coats of Tile Doctor Seal and Go which is ideal for Victorian tiled floors as it leaves a low sheen finish whilst providing excellent stain protection.

As you can see from the ‘before’ and ‘after’ photos the results were impressive and the customer described it as, “looking great”.

Source: Victorian tile restoration in Central London

Removing paint from Victorian Tiles

Posted on December 8, 2013 by AbzDominise

These Victorian tiles at a residence in Glasgow went through a dramatic change after we restored the colours and appearance. You can see from the photograph below the tiles were dull, stained and there was also paint splashes in various places.

Victorian-Tiled-floor-in-Glasgow-Before-cleaning

Cleaning a Victorian Floor

Firstly the floor was swept out and vacuumed to remove all loose debris; we then covered the entire floor with a strong solution of Tile Doctor Remove and Go combined 50/50 with NanoTech Ultra Clean which was left to dwell on the floor for an hour so it could soak into the tile. This floor did not have a previous sealer applied however the solution helped to break down the ground in dirt in the tiles and also remove the paint splashes.

The dirty solution was then extracted off using a wet vacuum and the floor rinsed with clean water several times to remove any chemical residue. Next we mixed a 50/50 solution of Tile Doctor Pro Clean and NanoTech Ultra Clean which was then scrubbed into the tile using a black scrubbing pad on a rotary machine. This was then removed and floor rinsed again and the floor was cleaned a further three times using a strong solution of Tile Doctor Pro-Clean and extracted with a wet vacuum again followed by a mopping of Neutral Tile Cleaner.

Sealing a Victorian Floor Sealing

Once the floor was dry it was then sealed using four coats of Tile Doctor Seal and Go to achieve the finished result. I recommend Seal and Go for Victorian tiled floors as it leaves a low sheen finish whilst providing excellent stain protection.

Victorian-Tiled-floor-in-Glasgow-after-cleaning

Source: Victorian Tile Problems Resolved in Glasgow

Victorian Tile Restoration in Glasgow

Posted on November 20, 2013 by AbzDominise

This Victorian tiled floor was located in the west end of Glasgow, the owner had discovered the tiles under the carpet and wanted to have them restored as an original feature. When we arrived the floor was still covered in carpet glue, cement, and hessian backing from the carpet that had been stuck to the tiles.

victorian-tiled -floor-in-Glasgow-before

Cleaning a Victorian Floor

The first job was to scrape off as much hessian backing and glue as we could with large scrapers and brushed all loose debris away. We then covered the entire floor with a strong solution of Tile Doctor Remove and Go combined with NanoTech Ultra Clean to create an effective coatings remover; this was then left on the floor to dwell for an hour in order to break down and soften the adhesive etc. The floor was then wet extracted and rinsed with clean water several times to remove any excess residue. This allowed us to see what glue was left which was then removed using a steamer. After this we cleaned the floor three times using Pro-Clean and a black buffing pad on a rotary bonnet machine to clean the floor; again all the dirty water was wet extracted with a wet vacuum and the floor neutralised with more water to ensure no chemicals remained on the floor prior to sealing.

Sealing a Victorian Floor Sealing

The floor was left to dry overnight and we came back the next day to seal it with four coats of Tile Doctor Seal and Go which is an ideal sealer for Victorian tiled floors as it leaves a low sheen finish whilst providing excellent stain protection. You have to wait for each coat to dry before moving on to the next so it did take a while.

This was a tough job but certainly well worth the effort as the floor has been completely transformed and now looks fantastic.

Source: Restoring an original Victorian Tiled floor in Glasgow

Removing Glue from Victorian Tile

Posted on November 18, 2013 by AbzDominise

The owner of this Victorian tiled bathroom floor in Horncastle had tried scrubbing and scraping these tiles will little to show for it, in the end after spending hours on this cold floor and trying lots of different products he was fed up and it still looked less than satisfactory. The tiles were very old and dirty and had remnants of glue stuck around the edges indicating they had previously been covered by something else such as lino, fortunately Victorian tiles are our bread and butter and we have managed to restore tiles in a much worse state than this.

Victorian tiled floor near Horncastle before Cleaning3

Victorian tiled floor near Horncastle before Cleaning2

Cleaning Victorian Tiles

We set about cleaning the tile using Tile Doctor Remove and Go which is a strong coatings remover which is ideal for removing old sealers and adhesive products. It was left it to dwell on the floor for a while in order to give it chance to soak into the tile and get to work on the glue before being agitated using a rotary machine fitted with a black scrubbing pad. The soiled solution was then removed using a wet vacuum and the floor given a good rinse with clean water again using the wet vacuum to get the floor dry. This process tackled the glue but the tiles were still in need of a good clean so Tile Doctor Pro-Clean which is a strong alkaline cleaning product safe to use on tile and stone was applied; this was left to dwell and then scrubbed into the tiles to get a really deep clean, stiff brushes were used along the grout lines to get them clean as well and then the floor was given a thorough rinse to neutralise the tile and remove any trace of cleaning products.

Sealing Victorian Tiles

The next step was to seal the floor, however the tiles need to be dry before you can do this so we got our Turbo drying system out of the van, switched it on and it soon had the floor dry. Four coats of Tile Doctor Seal and Go were applied to the floor allowing twenty minutes to dry between coats; this particular sealer is recommended for Victorian tiles and does a great job of adding a nice sheen to the floor as well as adding stain protection.

Victorian tiled floor near Horncastle after Cleaning2

Victorian tiled floor near Horncastle after Cleaning1

We managed to complete the work in a single day and the owner was absolutely delighted by the results.

Source: Victorian Tile Restoration in Lincolnshire

Removing Stubborn stains from neglected Victorian Tile

Posted on October 24, 2013 by AbzDominise

The photograph below is from a Victorian tiled hallway floor that we were asked to restore in the historic town of Towcester, Northamptonshire; the owner wanted the tiles restored as an original feature. You can see from the photograph below how dull and neglected the tiles were so we had our work cut out.

Victorian Tiles in Towcester Before Restoration

Cleaning Victorian Tiles

We set about cleaning the tile using Tile Doctor Pro-Clean which is a powerful alkaline cleaning product that is safe to use on tile and stone. It was applied with a mop and left it to dwell on the floor for ten minutes first in order to give it chance to soak into the tile and get to work on the dirt. It was then worked into the floor using a rotary machine fitted with a black scrubbing pad, stiff hand brushes were used in difficult to get to places and along the grout lines requiring a substantial amount of elbow grease. The soiled water was picked up with a wet and dry vacuum and the floor was rinsed with clean water so we could see the result.

Unfortunately there were a number of stubborn areas and a stronger product was needed to shift them so we applied a dilution of Tile Doctor Remove and Go which is a coating remover that can shift most issues, again this was applied and left to dwell for a while before working it into the stubborn stains using hand brushes. The dirty solution was removed again using the wet and dry vacuum and we could see the tiles were now clean so the floor was given a thorough rinse several times with fresh water to remove any leftover chemical and then left to dry overnight.

Sealing Victorian Tiles

The next day the floor had dried so we were able to seal it using four coats of Tile Doctor Seal and Go which adds a nice shine to the floor as well as providing a surface seal that will help protect the tile from stains going forward.

Victorian Tiles in Towcester After Restoration

A lot of effort but what a transformation and well worth the work that went into it as you can see from the photograph above.

Source: Victorian Tile Restoration in Brighton

Victorian Tile Cleaning in Middlesex

Posted on September 18, 2013 by AbzDominise

Details below of a Victorian tiled porch in Twickenham which was ingrained with dirt and in need of a deep clean, there was also evidence of paint splashes from decorating work which would also need to be removed.

Victorian Tiled Porch in Twickenham Before Cleaning

Cleaning Victorian Tiles

We set about cleaning the Victorian tile using a steamer in conjunction with Tile Doctor Pro-Clean which is a very effective Tile Cleaning product worked. It was a small space so the tile and grout were scrubbed by hand wand using a stiff brush, it wasn’t long before we could see the dirt coming out of the floor. The soiled cleaning solution was picked up with a wet and dry vacuum and then Tile Doctor Remove and Go was applied to the paint spots leaving it to dwell for a while before further scrubbing. Once I was happy the tiles were now clean the floor was given a thorough rinse with fresh water to remove any leftover chemical and then left to dry.

Sealing Victorian Tiles

Once the floor had dried four coats of Tile Doctor Seal and Go was applied to the tile and this gave it a high sheen and durable finish. Seal and Go will provides good stain protection and really enhances the appearance and colour of Victorian tile.

Victorian Tiled Porch in Twickenham After Cleaning

I think you will agree from the photographs that the appearance of this beautiful tiled floor had been much improved. If you have a similar issue with your floor do get in touch for a free quotation, Tile Doctor can service all types of natural and man-made stone flooring covering most of the UK.

Source: Maintaining Victorian Tiles in Twickenham

Full Victorian Floor Restoration

Posted on September 16, 2013 by AbzDominise

This job was a full restoration of a Victorian tiled floor that had been hidden under those thin adhesive backed lino tiles (see photo below) in the hallway of a house in Sutton Coldfield.

Victorian Tiles Sutton Coldfield Before Restoration

Restoring Victorian Floor Tiles

The first job was to remove the vinyl tiles which being stuck onto the floor left a rather nasty looking floor. I knew from experience this would be tricky to remove and so soaked the floor in Tile Doctor Remove and Go (does what it says on the tin) and left it for a while to soften the glues. Then with a rotary machines fitted with a polyscrub brush attached running at slow speed set about scrubbing the floor to get as much glue of the Victorian floor tiles as possible. This process worked quite well however once I have removed the soiled solution using a wet vacuum I could see there were still quite a a few stubborn patches remaining. The solution was to get down on my hands & knees with a nylon brush, a scraper and more Remove and Go, as you can imagine it took a long time to get the floor really clean and when finished I gave the tile a thorough wash down with water to neutralise the floor and then left it overnight to dry.

Sealing Victorian floor Tiles

The next day I confirmed the floor had dried and then proceeded to apply four coats of Tile Doctor Seal & Go which is the recommended sealer for Victorian tiles, it not only protects the tile it also leaves a nice shine on the floor.

The photographs show a huge transformation and my customer was absolutely delighted with the results, and left the comment below on the Tile Doctor feedback system.

Trevor had a very tough job to do getting our Victorian tiles into shape after decades under a Marley tile floor. They were covered in layers of hard glue but Trevor worked exceptionally hard restoring them to like new. Trevor was very friendly and punctual. An excellent job done and we would definitely recommend him.
Giles Stendall, Sutton Coldfield, West Midlands

Victorian Tiles Sutton Coldfield After Restoration

Source: Victorian Tile Maintenance and Restoration in Staffordshire

Victorian Tile Refresh

Posted on September 10, 2013 by AbzDominise

This classic Victorian tiled floor was installed in the hallway of a house in the town of Weeping Cross, Staffordshire. The floor was in pretty good condition but had become dull and was in need of a deep clean to put some life back in the tiles, there was also evidence an old adhesive around the edges indicating it had been covered by carpet at some point.

Cleaning Victorian Floor Tiles

The first job was to remove the glue which I did with a small black scrubbing pad and a mixture of Tile Doctor Remove & Go combined with NanoTech UltraClean and a scraper.

The Remove and Go NanoTech worked well on the stubborn adhesive so I went onto clean the rest of the floor using the same product combination but this time worked in using a rotary machine fitted on slow speed with a black scrubbing pad pad. The resulting soiled solution was vacuumed up using a wet pick up machine and the floor left to dry overnight.

Sealing Victorian floor Tiles

The next morning I mopped the floor with a damp mop and then when it was dry applied four coats of Tile Doctor Seal & Go which is a recommended protective sealer for Victorian tiles and leaves a nice shine on the floor. As you can see it looks fantastic and when the owners came home they were thrilled with the results and left the comment below on the Tile Doctor feedback system.

“Trevor has done a great job with our tiled floor, we are so pleased with the results! We would definitely recommend him!
Mark Broomhall, Stafford”

Source: Victorian hallway floor tiles cleaned in Staffordshire

Restoring 1930 Victorian Tiles in Hinckley

Posted on September 3, 2013 by AbzDominise

This Victorian Tiled hallway floor was installed in a house in Hinckley near Coventry and dated back to the 1930s. The floor was covered in grout haze, plaster and other substances I couldn’t identify so although structurally intact not in good cosmetically.

Victorian Floor Hinckley Before Cleaning

Cleaning a Victorian Tiled Hallway Floor

I decided to tackle the Grout Haze first by applying Tile Doctor Grout Clean-Up which is an acid based product which does what it says on the bottle and allows any surface grout to be wiped off, it’s also effective on the removal of mineral deposits such as Limescale but being acidic you can’t leave it on the surface too long and needs to removed and tiles rinsed with clean water afterwards.

The next step was to give the floor a thorough clean so a solution of Tile Doctor Pro-Clean was applied to the floor and left to soak in for a short while before being worked into the tile with a rotary machine fitted with a black scrubbing pad. The grout also need attention, unfortunately we don’t have a machine that will get into the grout lines so this had to be manually scrubbed by hand using a grout brush, which as you can imagine took some time to do. The soiled cleaning solution was then removed using a wet vacuum and the floor thoroughly rinsed with water and then left it to dry.

Sealing Victorian Hallway Tiles

Once we were happy the floor was dry we started the sealing process with the application of Tile Doctor Colour Grow which is an excellent sealer which leaves a matt finish providing stain protection whilst also enhancing the natural colours in the tile. There are a numbers of different sealers you could choose to seal a Victorian floor and in this case Colour Grow best met the customers requirements.

Cleaning a Victorian Tiled Floor in Hinckley, Leicestershire

Victorian Tile Cleaning in Shepperton

Posted on July 25, 2013 by AbzDominise

Details below of a Victorian tiled floor we did recently in in St Margaret’s, Shepperton. The floor had not been maintained for a while and was in need of a mechanical scrub clean and a new seal, building and renovations have been on-going for some time and so in some areas there was a lot of ground in dust and soil.

Cleaning Victorian Tiles

We set about cleaning the floor using Tile Doctor Pro-Clean which was applied with a mop and left it to dwell on the floor for five minutes in order to give it chance to soak into the tile and get to work on the dirt. The solution was then worked into the floor with the use of a rotary scrubbing machine fitted with a scrubbing pad. The soiled residue was then vacuumed away and the floor was rinsed through, the process was then repeated until we were happy with the overall condition of the tiles.

Sealing Victorian Tiles

Due to moisture being held in the substrate we had to allow seven days for the floor to dry and tests were performed with a damp meter to ensure the floor was ready to accept a sealer. Four coats of Tile Doctor Seal and Go were then applied which is a recommended Sealer for Victorian Tile, offering good stain protection and adding a low sheen to the surface. Sealing the floor also makes cleaning it much easier going forward, it is however a slow process as you have to let each coat dry before applying the next.

We can maintain all types of tile, stone and grout servicing the Twickenham and the surrounding areas so please get in touch for a free evaluation of your floor.

Source: Maintaining Victorian Floor tiles in Middlesex

Restoring a Victorian Tiled Floor

Posted on June 30, 2013 by AbzDominise

Details below of a Victorian tiled floor that we cleaned and sealed at a house in Hale, Cheshire, you can see from the photographs below how poor a condition it was in however the tiles were structurally sound so we set about restoring it.

Victorian Floor Deep Cleaning

The tiles were covered with thick layer of old resin, glue, trapped dirt, possibly wax as well, so the best system for this on Victorian Floor Tiles is to cover the Tiles with a 50/50 mix of Tile Doctor Remove and Go and NanoTech Ultra-Clean; the Remove and Go breaks down the wax, glues etc. while the Nano-Clean works deeper in to the tiles and encapsulates the trapped dirt. It does take time for this process to work however so to help the process along we soak the area with these products, cover over with a plastic sheet and then leave it. The plastic sheet this stops the products from drying out and also makes the floor sweat which works like a sauna to open up the pores of the Tiles. We then cover the plastic with Cotton Dust sheets and leave it like that overnight, the customer can still walk on the Floor area while the Treatment is in place.

The next day we lifted the plastic and steamed the whole area to help release the old trapped dirt and grime etc., the floor is then given a good rinse with clean water and we use a wet vacuum to remove the resultant slurry. We couldn’t seal the floor that day as it was still wet so the cotton sheets were put back on and switched on a dehumidifier to help speed up the drying process.

Victorian Floor Sealing

We came back the nextday and after testing the floor with a damp meter to ensure it was dry we began to seal it using five coats of Tile Doctor Seal and Go. Seal and Go is a sealer for Victorian floor tiles as it provides stain resistance as well as a low sheen finish.

The customer was very happy with the results and as you can see from the photographs we have managed to completely transform the floor.

Source: Victorian Tiles Restored in Cheshire