Restoring a Carpet Covered Tiled Hallway at a Victorian Property in Glasgow’s West End

I thought you might be interested in these pictures of a tile restoration that we carried out in the hallway of a victorian property in the West End of Glasgow. Glasgow is actually the most populated city in Scotland and the third biggest by population in the whole of the UK so naturally a busy location for us.

The floor had been previously covered in carpet and as a result was stained with adhesive and paint splashes. We popped in to do a site visit, so we could survey the floor and see for ourselves the condition of the floor. Although not in great shape, I was happy that the overall floor was in good physical condition and could be restored with the help the products and methods.

Victorian Hallway Floor Before Cleaning Glasgow West End

I discussed with the client the process involved and the costs to put it right. They were happy to accept my quote and we booked the job in for later in the month. The job would take two days to complete, one day to clean and a further day to seal the floor.

Victorian Hallway Floor Before Cleaning Glasgow West End

Cleaning a Victorian Tiled Hallway Floor

The first job was to clear the floor of the wooden carpet gripper by carefully chipping it off the floor. This took a bit of time and we had to be careful not to damage the floor further.

Next, we started on deep cleaning the floor by applying Tile Doctor Oxy-Gel. This is a strong alkaline based cleaner and degreaser in gel form, its great for when a long dwell time is required to break down dirt, grime, acrylic sealers, stains and oil-based products and waxes.

We left the Oxy-Gel to dwell for twenty to thirty minutes to ensure it got to work on breaking down the layers. It was then worked into the tile using a black scrubbing pad fitted to a rotary machine with the slurry rinsed off the floor and extracted with a wet vacuum. This process was carried out a few times to get the floor as clean as possible could before we gave a final scrub and rinse with Tile Doctor Acid Gel to combat any efflorescence issues that can occur on these old floors that do not have a damp proof membrane.

Sealing a Victorian Tiled Hallway Floor

I returned the following day to seal the floor checking first that it had dried using a damp meter. Once I was satisfied, four coats of Tile Doctor Seal and Go Extra were applied to the tiles to give the sheen finish asked for by the client. This process takes longer that you might think as you have to wait for the first coat to dry before applying the next and naturally this can vary depending on the conditions.

I chose Seal and Go Extra as these Victorian properties were built before the invention of damp-proof membranes so you need to use a fully breathable sealer that will allow dampness to rise through the tile and evaporate. Use of a non-breathable sealer can lead to damp becoming trapped under the floor which can spread into the walls leading to rising damp. The sealer will protect the tiles and make it much easier to clean going forward, additionally it enhances the appearance of the tile leaving a sheen finish which allows the vivid colours to shine through.

Victorian Hallway Floor After Sealing Glasgow West End

The client was very happy with the floor and quite amazed with the before and after shots, they had not expected the results to be as good. They would now be able to easily keep the floor clean and looking good for any visitors.

Victorian Hallway Floor After Cleaning Glasgow West End

 

Source: Victorian Tile Cleaning and Sealing Service in Glasgow

Deep Cleaning Old Victorian Tiles

The owner of this pre 1900s period house in the town of Melksham contacted us to clean & seal their Victorian tiled hallway which had been laid in a geometric pattern and was the original floor from when the house was built. Given its age it was in excellent conditions and a real testament to Victorian engineering.

Original Victorian Tiles Melksham Before Cleaning

Cleaning Victorian Tiles

Firstly we mixed a strong solution of Tile Doctor Pro-Clean and Nano-Tech HBU remover; HBU stands for Heavy Build-Up and is a great product for getting deep stains out of tiled floors. The tiles were covered with the solution and left for twenty minutes so it could soak into the pores. We then attached a black pad to a rotary machine and scrubbed the area thoroughly. Any paint or adhesives was then removed using a scraper and once we were satisfied we then removed the slurry using a wet vacuum and rinsed several times with cold clean water and a deck brush to ensure we had removed all traces of cleaning product before sealing. Stubborn areas were re-treated and the process took most of the day so we then left the floor to dry overnight.

Sealing Victorian Tiles

Upon our return we tested the floor was dry with a damp meter, testing in a number of locations. The readings were fine so we proceeded to seal the floor using six coats of Tile Doctor Seal and Go which will protect the floor from further dirt build-up and staining, it also adds a nice subtle sheen to the tiles.

Original Victorian Tiles Melksham After Cleaning and Sealing

All went well with no major problems and as you can see the tiles now look fantastic.
 
 
Source: Tile, Stone and Grout Problems Resolved in Wiltshire

Renovating a Victorian Tiled Hallway

Details below of a customer in Telford who bought a house with a Victorian Tiled Hallway a couple of years prior and has been refurbishing it in sections. When I went there to do the quotation the floor I could see it was in a desperate state and in need of a deep clean and replacement of several broken and cracked tiles, there were several loose ones too.

Victorian tiled Hallway before restoration in Telford Victorian tiled Hallway before restoration in Telford

Cleaning and Repairing a Victorian Tiled Floor

The floor was cleaned using a medium dilution of Tile Doctor Pro-Clean which was left to soak into the tiles for around 15 minutes before being worked into the tile and grout using a rotary machine fitted with a black scrubbing pad and a stiff grout brush. Pro-Clean is a strong alkaline cleaning product that is safe to use on Stone, Tile and Grout. The floor was given a thorough rinse with clean water and a wet vacuum was used to remove the water from the floor, stubborn areas were then spot cleaned using the same process and the floor was then left to dry off overnight.

Victorian tiled Hallway after repair and cleaning in Telford Victorian tiled Hallway after repair and cleaning in Telford

The next day I returned to do the repair work, originally there were seven tiles to replace, but I ended up replacing sixteen tiles and fixing twenty five, fortunately Victorian tiles are still popular and you can still source replacements.

Victorian tiled Hallway after repair and cleaning in Telford Victorian tiled Hallway after repair and cleaning in Telford

Sealing a Quarry Floor Sealing

To ensure the repaired areas had sufficient tile for the adhesive and grout to set I left the floor for four days before returning to apply a sealer checking the moisture level first to ensure it was dry enough to take the sealer. To seal the tiles which will help protect them from staining I applied five coats of Tile Doctor Seal and Go which works really well on Victorian tiles and adds a nice subtle shine to the floor also being water based you don’t get that smell that a solvent based sealer has.

Victorian tiled Hallway after restoration in Telford Victorian tiled Hallway after restoration in Telford

 
 
Source: Restoring Victorian tiles in Shropshire

Restoring an Original Geometric Tiled Floor

This original Victorian Geometric tiled floor was recently uncovered in the hallway of a house in Mapperley near Nottingham. These beautiful old floors built by Victorian Craftsmen are often neglected and sometimes hidden by other floor coverings. In this case we had to remove carpet, carpet grippers and underlay which had been stuck down and often we find vinyl tiles glued to the tile surface etc. This takes its toll on the floor causing it to lose its vitality however help is at and in the form of the specialist Tile Doctor Restorative Cleaning and Sealing Treatment.

Victorian Geometric Tiled Hallway Floor Mapperley Before Cleaning

Cleaning the Victorian Tiled Floor

The first job was to protect the adjacent carpets and wood flooring, before starting the cleaning process. Then I applied a strong solution of Tile Doctor Pro-Clean which is a heavy duty cleaning solution mixed with Remove and Go which is a coating remover. This helps to remove old and worn coatings along, with the many years of soiling which was hiding the vibrant colours of the Victorian tiles beneath.

This unique cleaning solution along with a combination of dwell time and mechanical agitation breaks down the many years of contamination on the tiles. During this stage of the cleaning process, we also sometimes have to remove paint and adhesive residues. The cleaning process is intensive to ensure maximum soil removal and is achieved as above by using a weighted rotary floor cleaning machine, along with Tile Doctors restoration floor pads.

The resulting slurry created by the cleaning process above is vacuumed away with a wet vacuum and the floor was then rinsed with a dilution of Tile Doctors Grout Clean-Up product which removes any inherent efflorescence contamination that is common on old floors without damp proof membranes.

The floor is then given a thorough rinse with clean water to neutralise the floor and removing any trace of cleaning solution from the previous treatments which could affect the sealer, again a wet vacuum was used to get the floor as dry as possible.

The cleaning was completed in a day and to ensure the floor would be dry for sealing the next day I installed a couple of air movers and left it to dry out overnight.

Sealing the Victorian Tiled Floor

The following day I sealed the tiles to saturation point with Tile Doctor Colour Grow which is a ‘Colour Enhancing’ Impregnating Sealer. It’s an advanced sealer that allows the floor to breath, and also protects from both water and oil based spills and if maintained correctly will act as a long lasting treatment that will last many years!

With regards to maintenance I recommend that customers use a damp mop with a neutral PH cleaning product such as Tile Doctor Neutral Cleaner. This is highly effective on soiling but most importantly it’s not acidic and so will not damage the integrity of the sealer. Many household cleaning products, and also high-street branded cleaning products, can quickly damage floor coatings; they can also leave residues on floors that contribute to rapid re-soiling.

Victorian Geometric Tiled Hallway Floor Mapperley After Cleaning

 
 
Source: Tile, Stone and Grout Problems resolved in Nottinghamshire

Deep Cleaning Moroccan Encaustic Cement Tiled toilet Floor

Similar in many ways to Victorian tiles, these are Moroccan Encaustic Cement tiles which come in a huge range of patterns and are ideal for indoor and external use although they should be sealed to protect against water penetration and dirt as well as making cleaning easier. Very popular in hot countries, they certainly add a nice flair which they have done to this ground floor WC at residence in Barrhead which is a town south west of Glasgow in East Renfrewshire.

Moroccan Encaustic Cement Tiles Barrhead Before Cleaning

Cleaning a Victorian Floor

The tiles were looking rather dull and in need of a deep clean and re-seal so the first job was to clean the floor and remove and remaining sealer by applying a strong solution of Tile Doctor Pro-Clean worked in using a black scrubbing pad fitted to a rotary bonnet machine, with all the excess extracted using a wet vacuum. This process was repeated three times until I was satisfied any remaining sealer had been removed and the tile and grout was now as clean as it could be. The floor was then given a rinse with water and cleaned again with Tile Doctor Neutral Tile Cleaner to remove any trace of Pro-Clean; again the fluids were extracted using a wet vacuum.

Sealing a Victorian Floor Sealing

The floor was left to dry overnight and we came back the next day to seal it using six coats of Tile Doctor Seal and Go which works well on these types of tiles as it adds a nice subtle sheen as well as adding the necessary stain protection.

Moroccan Encaustic Cement Tiles Barrhead After Cleaning

 
 
Source: Tile, Stone and Grout Cleaning in Glasgow

Removing Bitumen Adhesive from Victorian Tiles

We were contacted by a letting agent who managed a large town house in Goring by Sea that had been turned into flats. The area they wanted dealing with was the entrance hall where the original Victorian tiled floor had been covered over with linoleum tiles backed with a bitumen based adhesive and after removing the tiles the floor was now in a terrible state. I was confident that they could be restored however in extreme cases like this there can be no guarantee of the end result so I set their expectations accordingly.

Victorian Tiles Goring by Sea Before Renovation Victorian Tiles Goring by Sea Before Renovation

Restoring Victorian Floor Tiles

I started the job by softening the old adhesive with an application of Tile Doctor Remove and Go which was left to soak into the tile before using a paint stripping blade to carefully lift it off. This process had to be done over the entire area before I could start on the cleaning and once finished the floor was given a good rinse.

The tiles were now mostly free of the adhesive but were very grubby so I started over but this by time by applying a strong dilution of Tile Doctor Pro-Clean which is a powerful tile cleaning product designed for use on stone, tile and grout. The solution was left to soak into the tile before being worked into the remaining dirt and grime using a buffing machine fitted with a scrubbing pad. One done the floor was thoroughly rinsed and any areas that needed it were spot treated.

Sealing a Victorian Floor Tiles

The floor was left to dry out for a few days after which we came back to seal it with four coats of Tile Doctor Pro-Seal which is a penetrating sealer which gave the desired natural look finish and will provide long lasting stain protection by soaking into the pores of the tile and preventing dirt from becoming ingrained there. You have to wait for each coat to dry before moving on to the next so it did take a while.

Victorian-Tiles-Goring-by-Sea-After-Renovation-3 Victorian Tiles Goring by Sea After Renovation

This was a tough job but certainly well worth the effort both the letting agents and residents all said how great the floor now looked.
 
 
Source: Tile, Stone and Grout Cleaning Service in West-Sussex

Restoring 200 year old Victorian tiles

Details below of a Victorian Tiled floor I renovated in Penrith earlier this year. The floor had previously been hidden under laminate flooring and the mat well had been concreted over and other tiles were missing and replaced with concrete infill.

Victorian Tile Renovation Penrith Before

Restoring Victorian Floor Tiles

I carried out a damp test and started by removing the concrete infill and levelling the mat well with a self-levelling compound. Fortunately I had been able to source reproduction tiles that were a pretty good match to the originals which is amazing bearing in mind that the floor was originally laid in 1831 (pre Victorian in fact).

Before replacing the missing tiles I cleaned the existing floor with a diluted mixture of Tile Doctor Remove and Go and NanoTech UltraClean; Remove and Go is a coatings remover so as well as cleaning the floor it also removed the traces of adhesive that was used to stick down the line. I washed down the floor and found there were still some stubborn marks which I tackled with neat Remove and Go and a steam cleaner. Once I was happy with the floor I gave it another rinse and then set about fixing the replacement tiles.

Victorian Tile Renovation Penrith After

Sealing Victorian Floor Tiles

I needed the floor bone dry before sealing so I allowed it to dry out for a couple of days before returning. I sealed the tiles with Tile Doctor Seal and Go which adds a nice subtle shine however I did find the Victorian tiles to be extremely absorbent and so needed seven coats of sealant in total which took much of the day. The sealer did well to bring out the deep colours in the tile as well as brought out the colour in the tiles as well as providing the lovely satin finish. The customers were extremely satisfied with the final result

Victorian Tile Renovation Penrith After

 
 
Source: Tile, Stone and Grout Restoration Service in North-Cumbria

Putting the Shine Back On Old Victorian Tiles

I’m beginning to wonder if Tile Doctor has started a trend that has got people looking under their hallway carpets looking for period floors. Indeed this customer in Whitchurch has done exactly that and discovered a beautiful Victorian tiled floor which was with the exception of adhesive residue and dirt was in reasonable condition. They had tried to restore it themselves but could not achieve the desired results so being their local Tile Doctor we got the call.

Victorian tiled hallway Whitchurch before cleaning Victorian tiled hallway Whitchurch before cleaning

Removing Glue and Dirt from a Victorian Tiled Floor

The floor was dirty which I would normally take care of with Tile Doctor Pro-Clean however glue requires something stronger so a strong dilution of Tile Doctor Remove and Go was applied, left to soak in and then scrubbed into the tiles using a rotary machine fitted with a black scrubbing pad. Remove and Go does pretty much what its name suggests and is a great product for safely removing coatings from tile. The floor was given a thorough rinse with clean water and a wet vacuum was used to remove the water from the floor and get it dry so it could be sealed. Some stubborn areas were still evident so they were spot treated using more Remove and Go.

Victorian tiled hallway Whitchurch after

Sealing a Quarry Floor Sealing

The floor needs to be thoroughly dry before it can be sealed and this can be a problem with old houses which may have damp issues. I therefore left the floor to dry for 5 days before coming back to seal it and when I returned checked the floor using a damp meter first. The readings were fine however there were a couple of areas that needed further treatment so those were spot treated and then dried until I was satisfied the floor was as good as it could be. I then processed to seal the floor using five coats of Tile Doctor Seal and Go which adds a nice subtle sheen to the tiles as well as providing stain protection going forward.

I think you will agree from the photographs the floor looks great, certainly the customer was really pleased with the result.

Victorian tiled hallway Whitchurch after sealing

 
 
Source: Tile, Stone and Grout Restoration Service in Shropshire

Removing Adhesive and Paint from Vistorian Hallway Tiles

The owner of this house located in the village of Holt had discovered a beautiful Victorian Tiled floor hidden underneath their hallway carpet and made contact with us to get it restored and brought back to life.

Victorian Tiled Floor Restoration in Holt Before

Cleaning a Victorian Tiled Floor

We started by making a strong dilution of Tile Doctor Pro-Clean mixed 50/50 with Nanotech Ultraclean which was applied to the floor and left to soak in to eat through the dirt, dust and marks left behind from the carpet and underlay. Once we let the solution dwell for twenty minutes we attached a black scrubbing pad to a rotary machine and worked the cleaning solution into the tile to remove the dirt and any old sealer that may have been present, then once the cleaning solution became was very dirty it was removed using a wet vacuum.

The cleaning process revealed that there were paint splatters all around the wall edges where decorating had previous taken place and there was also evidence of carpet adhesive remaining on the tile. To remove this a solution of Tile Doctor Remove & Go was applied to the stubborn areas and left to dwell for ten minutes before being agitated with a stiff deck brush and a floor scraper. Once the edges were to a satisfactory level we then rinsed the area several times with fresh water to ensure any trace of cleaning product had been removed before sealing again using a wet vacuum to remove the water and also to dry the floor as much as possible before leaving for the evening.

Sealing a Victorian Floor Sealing

Upon our return the next day we did a damp test to make sure the floor was ready to be sealed. The test was positive so we then sealed the Victorian tiles with five coats of Seal & Go which both protects the floor against spills and traffic but also enhances the colours of each tile.

Victorian Tiled Floor Restoration in Holt After

 
 
Source: Residential and Commercial Victorian Tile Restoration in Wiltshire

Refreshing and Original Victorial Tiled Floor

I recently paid a visit to Windermere in the Lake District to clean and re-seal a Victorian Tiled hallway floor. The customer wanted the shine putting back on the Victorian tile and some tile grout had become loose and needed replacing.

Victorian Tiled Floor Windermere Before Cleaning Victorian Tiled Floor Windermere Before Cleaning

Cleaning Victorian Floor Tiles

On arrival I set up my tools and covered any areas that needed protecting against water. Once that was done I started to strip the floor of any remaining sealer using Tile Doctor Remove and Go which is a coatings and sealer remover product that is safe to use on tile, stone and grout. Working in small areas the product was scrubbed into the tile and then washed it off with water using a wet vacuum to remove the soiled solution. This process was repeated until the whole floor was clean, there were a few stubborn areas and for these I mixed the Remove and Go 50/50 with Nano Tech Ultra Clean which adds tiny abrasive particles into the solution to make a more effective product. The process of scrubbing the floor made me realise that the loose grout problem was greater than first thought and some tiles need re-laying so I decided to come back and do this the next day, before leaving however I gave the floor a thorough rinse to ensure any trace of cleaning product was removed.

Grouting Victorian Tile

The next day I arrived and fixed all the loose tiles, my preference is to use the Mapei range of tile adhesives and grout, in fact the grout comes in a range of colours which is very useful if your filling in holes in travertine etc. One the adhesive had gone off I began to grout them in including those areas where the grout was missing or become loose. The last step was to wash off the grout from the tile surface and making sure it was all tidy for the next day.

Victorian Tiled Floor Windermere During Cleaning

Sealing Quarry Floor Tiles

On the third day I returned to the house and after verifying the floor was dry with a damp tester and the grout had hardened I started sealing the floor with Tile Doctor Seal and Go putting on thin coats which took about twenty minutes to dry, in total seven coats were applied which gave the floor the nice shine the customer was after.

Victorian Tiled Floor Windermere After Cleaning Victorian Tiled Floor Windermere After Cleaning

This job took me three days in total and after I had finished we discussed how to maintain the appearance and increase the longevity of the sealer by using a Neutral Cleaning product which unlike many acidic cleaners does not eat away at the sealer.
 
 
Source: Victorian Tile Restoration Services in Cumbria

Removing Bitumen from Victorian Tiles

Let me start this story by telling you this was the most challenging floor that I have come across so far. It all started with a request to visit a property in Oxford where they had discovered an original Victorian tiled floor under a parquet floor in the hall.

When I arrived the customer had taken up a small area in the corner and had already tried to remove the black bitumen that the parquet floor was stuck down with, he had made some progress but realized it would be a massive project without the right tools. After I had showed him how much cleaner I could take his patch he booked me to restore the floor, the customer said he would remove the parquet floor himself.

Victorian Floor Oxford Before Cleaning

Removing Bitumen from Victorian Tiles

When I arrived the parquet had been taken up to reveal a completely bitumen covered tiled floor that was very sticky. My first task was to put protection around the doors and skirting before moving on to removing the bitumen which was done by covering the half the floor in a mixture of Tile Doctor Remove and Go combined with Nano Tech UltraClean which was left to soak in for about an hour.

Victorian Floor Oxford Before Cleaning Victorian Floor Oxford Before Cleaning

After this I scrubbed the solution into the floor using a black scrubbing pad on my Rocky floor scrubbing machine, this loosened the bitumen from the floor which was then washed off with water and removed using a numatic wet vacuum. The same process was repeated on the other half of the floor and then the whole process was repeated again on both parts of the floor until it was clear of bitumen. This was arduous work and took a whole day to complete.

Cleaning Victorian Tiles

When I returned the next day I gave the floor a deep clean using a medium dilution of Tile Doctor Pro Clean, like the Remove and Go this was spread over the floor leaving it to dwell for 10 minutes before being scrubbed in using the scrubbing machine fitted with a black pad; again the floor was rinsed clean with water which was removed using the wet vacuum.

After this I applied Tile Doctor Grout Clean Up which is an acidic product that is great at removing grout smears and mineral deposits from tiles, being an acid you can only leave it on the tile for a short while so I worked in 1m square sections at a time on my knees spraying and scrubbing with a deck brush and then rinsing.

When I had finished this process the whole floor was thoroughly rinsed with clean water to ensure there were no cleaning products left on the floor. I then left the floor to dry promising to return a few days later when it had dried.

Sealing Victorian Quarry Tiles

I returned as agreed a few days later to seal the floor with five coats of Tile Doctor Seal and Go which is a great for Victorian tiles as it leaves a nice shine to the floor which is exactly how the customer wanted it. This process does take time however as you have to let the first coat dry before moving onto the next.

Victorian Floor Oxford After Cleaning Victorian Floor Oxford After Cleaning

From start to finish the transformation of the floor was amazing and the customer was very impressed with the results. Although the area was not large this was a very testing floor as bitumen stays sticky and was very difficult to remove even with the correct machines and products.
 
 
Source: Victorian Tile Restoration Service in Oxford

Restoring Badly Stained Victorian Tile

This classic Victorian tiled floor in Kingswood Kitchen; Cheshire was quite dirty and in need of a deep clean. Cleaning this type of floor is bread and butter for a Tile Doctor and so I had every confidence we could clean in and then re-seal it without any complications.

Victorian Floor Kingswood Before Cleaning 006 Victorian Floor Kingswood Before Cleaning 005

Cleaning a Stained Victorian Floor

In order to tack the ingrained dirt and I decided the best course of action would be to cover the Victorian Floor tiles with a 50/50 mix of Tile Doctor Pro-Clean and Nano-Tech UltraClean and leave it to work on the tile allowing the cleaner to break down any remaining previous sealer and in-grained dirt.

Victorian Floor Kingswood During Cleaning 007 Victorian Floor Kingswood During Cleaning 008

After about 30 minutes I steam cleaned the whole area multiple times to lift the ingrained dirt and grime out of the floor and then give the floor a thorough rinse removing the soiled solution using a wet vacuum. The floor was quite damp at this stage and needs to be dry to seal so we left it to dry overnight, we also left behind a dehumidifier to assist with the drying process.

Sealing a Victorian Floor

The next day we came back and tested the floor using a damp meter to make sure it was dry. Once we were satisfied we sealed the tiles using five coats of Tile Doctor Seal and Go which is ideal for Victorian tiles as it leaves an attractive low sheen finish, it’s also a water based sealer so there is no smell.

Victorian Floor Kingswood After Cleaning 012 Victorian Floor Kingswood After Cleaning 013

 
 
Source: Victorian Tile Restoration in North Cheshire

Victorian Tile Restoration in Oxfordshire

This old Victorian Quarry Tiled Floor was discovered in the basement of a large house in Oxford where they had been covered up for years. There were a couple of dead tiles that have had the tops taken of for some reason but the rest were in a reasonable condition given their age.

Victorian Quarry Tiled Floor before Restoration in Oxford

Restoring Victorian Quarry Tiles

On the first day I used a mixture of Tile Doctor Remove and Go combined with Nanotech UltraClean which adds an abrasive element to a powerful coatings remover. I spread this on the Quarry tiled floor and left it for about an hour so it could soak into the tile and breakdown old sealers and soil etc.; I then used a commercial steamer on the floor to aid the cleaning process and bring the dirt and old sealant to the surface. When that was done I rinsed the floor with clean water which was then removed along with the soil using a wet vacuum. The next step was to give the floor a mild acid rinse using Tile Doctor Grout Clean Up to remove any mineral deposits from the surface of the tile and then rinse down again with clean water so all the chemicals were removed. The floor was quite damp at this stage and need to be dry so it could be sealed so I left a dehumidifier there and a damp meter so the customer could test the floor.

Sealing Victorian Quarry Tiles

After a couple of days I got the call from the customer that the floor was now dry so I went round to seal it with five coats of Tile Doctor Seal and Go which is a recommended sealer for Quarry tiles providing good stain protection whilst adding a nice sheen.

Victorian Quarry Tiled Floor after Restoration in Oxford

This floor was 120 years old and the customer had no expectation of any significant improvement and had even considered covering it with wood before giving us a call; I was pleased therefore that we managed to exceed their expectations and breathe new life into this old floor.
 
 
Source: Restoring a 120 year old Victorian Tiled floor in Oxfordshire

Victorian Tile Restoration in Glasgow

This Victorian tiled floor was located in the west end of Glasgow, the owner had discovered the tiles under the carpet and wanted to have them restored as an original feature. When we arrived the floor was still covered in carpet glue, cement, and hessian backing from the carpet that had been stuck to the tiles.

victorian-tiled -floor-in-Glasgow-before

Cleaning a Victorian Floor

The first job was to scrape off as much hessian backing and glue as we could with large scrapers and brushed all loose debris away. We then covered the entire floor with a strong solution of Tile Doctor Remove and Go combined with NanoTech Ultra Clean to create an effective coatings remover; this was then left on the floor to dwell for an hour in order to break down and soften the adhesive etc. The floor was then wet extracted and rinsed with clean water several times to remove any excess residue. This allowed us to see what glue was left which was then removed using a steamer. After this we cleaned the floor three times using Pro-Clean and a black buffing pad on a rotary bonnet machine to clean the floor; again all the dirty water was wet extracted with a wet vacuum and the floor neutralised with more water to ensure no chemicals remained on the floor prior to sealing.

Sealing a Victorian Floor Sealing

The floor was left to dry overnight and we came back the next day to seal it with four coats of Tile Doctor Seal and Go which is an ideal sealer for Victorian tiled floors as it leaves a low sheen finish whilst providing excellent stain protection. You have to wait for each coat to dry before moving on to the next so it did take a while.

victorian-tiled -floor-in-Glasgow-after

This was a tough job but certainly well worth the effort as the floor has been completely transformed and now looks fantastic.
 
 
Source: Restoring an original Victorian Tiled floor in Glasgow

Removing Glue from Victorian Tile

The owner of this Victorian tiled bathroom floor in Horncastle had tried scrubbing and scraping these tiles will little to show for it, in the end after spending hours on this cold floor and trying lots of different products he was fed up and it still looked less than satisfactory. The tiles were very old and dirty and had remnants of glue stuck around the edges indicating they had previously been covered by something else such as lino, fortunately Victorian tiles are our bread and butter and we have managed to restore tiles in a much worse state than this.

Victorian tiled floor near Horncastle before Cleaning3 Victorian tiled floor near Horncastle before Cleaning2

Cleaning Victorian Tiles

We set about cleaning the tile using Tile Doctor Remove and Go which is a strong coatings remover which is ideal for removing old sealers and adhesive products. It was left it to dwell on the floor for a while in order to give it chance to soak into the tile and get to work on the glue before being agitated using a rotary machine fitted with a black scrubbing pad. The soiled solution was then removed using a wet vacuum and the floor given a good rinse with clean water again using the wet vacuum to get the floor dry. This process tackled the glue but the tiles were still in need of a good clean so Tile Doctor Pro-Clean which is a strong alkaline cleaning product safe to use on tile and stone was applied; this was left to dwell and then scrubbed into the tiles to get a really deep clean, stiff brushes were used along the grout lines to get them clean as well and then the floor was given a thorough rinse to neutralise the tile and remove any trace of cleaning products.

Sealing Victorian Tiles

The next step was to seal the floor, however the tiles need to be dry before you can do this so we got our Turbo drying system out of the van, switched it on and it soon had the floor dry. Four coats of Tile Doctor Seal and Go were applied to the floor allowing twenty minutes to dry between coats; this particular sealer is recommended for Victorian tiles and does a great job of adding a nice sheen to the floor as well as adding stain protection.

Victorian tiled floor near Horncastle after Cleaning2 Victorian tiled floor near Horncastle after Cleaning1

We managed to complete the work in a single day and the owner was absolutely delighted by the results.
 
 
Source: Victorian Tile Restoration in Lincolnshire

Cleaning a Terracotta tiled floor in East-Sussex

The photograph below is from a Victorian tiled floor that we recently restored in the seaside town of Brighton. The house owner discovered the tiles under carpet and after realising what a beautiful and original feature they were decided to have them restored and so called in Tile Doctor. The tiles had been well preserved by the carpet although as you can see they were looking rather washed out and were in need of a thorough deep clean.

Victorian Tiles in Brighton Before Restoration

Cleaning Victorian Tiles

We set about cleaning the tile using Tile Doctor Pro-Clean which is a powerful alkaline cleaning product that is safe to use on tile and stone. It was applied with a mop and left it to dwell on the floor for ten minutes first in order to give it chance to soak into the tile and get to work on the dirt. It was then worked into the floor using a rotary machine fitted with a black scrubbing pad, stiff hand brushes and a substantial amount of elbow grease was used to tackle the stubborn stains and along the grout lines. The soiled water was picked up with a wet and dry vacuum and once we were happy the floor was clean it was given a thorough rinse with fresh water to remove any leftover chemical and then left to dry.

Sealing Victorian Tiles

Once the floor was dry we were able to seal it using four coats of Tile Doctor Seal and Go which adds a nice shine to the floor as well as providing a surface seal that will help protect the tile from stains going forward.

Victorian Tiles in Brighton After Restoration

It was quite a transformation and well worth the effort as you can see from the photographs above.
 
 
Source: Victorian Tile Restoration in Brighton

Victorian Tile Refresh

This classic Victorian tiled floor was installed in the hallway of a house in the town of Weeping Cross, Staffordshire. The floor was in pretty good condition but had become dull and was in need of a deep clean to put some life back in the tiles, there was also evidence an old adhesive around the edges indicating it had been covered by carpet at some point.

Victorian Tiled Floor Before Cleaning Victorian Tiled Floor Before Cleaning

Cleaning Victorian Floor Tiles

The first job was to remove the glue which I did with a small black scrubbing pad and a mixture of Tile Doctor Remove & Go combined with NanoTech UltraClean and a scraper.

The Remove and Go NanoTech worked well on the stubborn adhesive so I went onto clean the rest of the floor using the same product combination but this time worked in using a rotary machine fitted on slow speed with a black scrubbing pad pad. The resulting soiled solution was vacuumed up using a wet pick up machine and the floor left to dry overnight.

Sealing Victorian floor Tiles

The next morning I mopped the floor with a damp mop and then when it was dry applied four coats of Tile Doctor Seal & Go which is a recommended protective sealer for Victorian tiles and leaves a nice shine on the floor. As you can see it looks fantastic and when the owners came home they were thrilled with the results and left the comment below on the Tile Doctor feedback system.

Trevor has done a great job with our tiled floor, we are so pleased with the results! We would definitely recommend him!
Mark Broomhall, Stafford

Victorian Tiled Floor After Cleaning Victorian Tiled Floor After Cleaning

 
 
Source: Victorian hallway floor tiles cleaned in Staffordshire

Victorian Tile Cleaning in Shepperton

Details below of a Victorian tiled floor we did recently in in St Margaret’s, Shepperton. The floor had not been maintained for a while and was in need of a mechanical scrub clean and a new seal, building and renovations have been on-going for some time and so in some areas there was a lot of ground in dust and soil.

Cleaning Victorian Tiles

We set about cleaning the floor using Tile Doctor Pro-Clean which was applied with a mop and left it to dwell on the floor for five minutes in order to give it chance to soak into the tile and get to work on the dirt. The solution was then worked into the floor with the use of a rotary scrubbing machine fitted with a scrubbing pad. The soiled residue was then vacuumed away and the floor was rinsed through, the process was then repeated until we were happy with the overall condition of the tiles.

Twickenham Victorian Floor Before

Sealing Victorian Tiles

Due to moisture being held in the substrate we had to allow seven days for the floor to dry and tests were performed with a damp meter to ensure the floor was ready to accept a sealer. Four coats of Tile Doctor Seal and Go were then applied which is a recommended Sealer for Victorian Tile, offering good stain protection and adding a low sheen to the surface. Sealing the floor also makes cleaning it much easier going forward, it is however a slow process as you have to let each coat dry before applying the next.

Twickenham Victorian Floor After

We can maintain all types of tile, stone and grout servicing the Twickenham and the surrounding areas so please get in touch for a free evaluation of your floor.
 
 
Source: Maintaining Victorian Floor tiles in Middlesex

Restoring a Victorian Tiled Floor

Details below of a Victorian tiled floor that we cleaned and sealed at a house in Hale, Cheshire, you can see from the photographs below how poor a condition it was in however the tiles were structurally sound so we set about restoring it.

Victorian Tiled Floor Before Victorian Tiled Floor Before

Victorian Floor Deep Cleaning

The tiles were covered with thick layer of old resin, glue, trapped dirt, possibly wax as well, so the best system for this on Victorian Floor Tiles is to cover the Tiles with a 50/50 mix of Tile Doctor Remove and Go and NanoTech Ultra-Clean; the Remove and Go breaks down the wax, glues etc. while the Nano-Clean works deeper in to the tiles and encapsulates the trapped dirt. It does take time for this process to work however so to help the process along we soak the area with these products, cover over with a plastic sheet and then leave it. The plastic sheet this stops the products from drying out and also makes the floor sweat which works like a sauna to open up the pores of the Tiles. We then cover the plastic with Cotton Dust sheets and leave it like that overnight, the customer can still walk on the Floor area while the Treatment is in place.

The next day we lifted the plastic and steamed the whole area to help release the old trapped dirt and grime etc., the floor is then given a good rinse with clean water and we use a wet vacuum to remove the resultant slurry. We couldn’t seal the floor that day as it was still wet so the cotton sheets were put back on and switched on a dehumidifier to help speed up the drying process.

Victorian Tile Blanket Cleaning

Victorian Floor Sealing

We came back the nextday and after testing the floor with a damp meter to ensure it was dry we began to seal it using five coats of Tile Doctor Seal and Go. Seal and Go is a sealer for Victorian floor tiles as it provides stain resistance as well as a low sheen finish.

Victorian Tiled Floor After Victorian Tiled Floor After

The customer was very happy with the results and as you can see from the photographs we have managed to completely transform the floor.
 
 
Source: Victorian Tiles Restored in Cheshire