Maintaining Victorian Tiles

Details below of a bread and butter job recently completed in Coundon near Coventry to Clean, repair and seal Victorian floor tiles. I call it a bread butter job as this is something we do a lot off and have therefore become quite proficient including colour matched repairs to grout and tile replacement.

Victorian Tiles in Coundon before cleaning

Cleaning Victorian Tiles

The tiles were quite dirty and in need of a deep clean so a 50/50 mix of Tile Doctor Pro-Clean and NanoTech UltraClean was diluted with water and left to soak into the tiles for around 15 minutes before being scrubbed into the Victorian tile and grout using a slow speed rotary machine fitted with a scrubbing pad. The dirty solution was removed and the process repeated and grout lines scrubbed until I was happy the tiles were clean; this was then followed with a thorough rinse with water and a wet vacuum was used to remove the fluids and get the tile and grout as dry as possible. We have a special fan to accelerate the drying process so this switched on and moved around the floor until it was dry.

Victorian Tiles in Coundon cleaned and drying

Sealing Victorian floor tiles

Once the floor was dry we started to seal it using Tile Doctor High Shine sealer which provides stain protection as well as a very shiny finish, hopefully you can appreciate the difference in the photographs on this page.

Victorian Tiles in Coundon Cleaned and Sealed

 
 
Source: Cleaning Victorian tiles in Warwickshire

One thought on “Maintaining Victorian Tiles

Comments are closed.